Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 145
2
1640 Pixel  counter Latest pixel count 
(Toner cartridge reference) PRT 0
 SYS Displays the latest pixel 
count in the printer  
function and toner car- 
tridge reference.
[Unit: 0.01%] 2
1649-0 Pixel  counterPixel count  
distribution 0-5% PPC  SYS The pixel count data 
are divided into 10  
ranges. The number of  
output pages in each  
range is displayed. In  
this code, the distribu-
tions in the...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 146
 
 The management items at PM support mode can also b e operated at setting mode (08).
The following items are displayed or set by using s ub-codes at PM management setting in the table 
below.

0: Present number of output pages - Means the present number of output pages.
1: Recommended number of output pages for replaceme nt
- Means the recommended number of output pages for  replacement.
2: Number of...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 147
2
Items PM management set-
ting  
*Indicated in 8 digits Date of previous 
replacement 
 Remarks
Photoconductive drum 1150-0 to 8 1151  
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0 
Sub-code 1: 64,000/74,000/90,000
Sub-code 4: 120,000/120,000/120,000
Drum cleaning blade 1158-0 to 8 1159 
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0 
Sub-code 1: 64,000/74,000/90,000 
Sub-code 4: 120,000/120,000/120,000
Drum separation...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 148
Cleaning roller 1266-0 to 8 1267  
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0 
Sub-code 1: 128,000/148,000/180,000 
Sub-code 4: 240,000/240,000/240,000
Fuser roller separation  
finger 1268-0 to 8 1269  
Sub-codes 0, 2, 3, 5, 6, 7, 8: 0/0/0 
Sub-code 1: 128,000/148,000/180,000 
Sub-code 4: 240,000/240,000/240,000
Pickup roller (RADF) 1282-0,1,2,8 1283 
Sub-codes 0, 2, 8: 0/0/0
Sub-code 1:...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 149
2
Separation roller (LCF) 1310-0,1,2,8 1311  
Sub-codes 0, 2, 8: 0/0/0 
Sub-code 1: 160,000/160,000/160,000
Separation roller 
(PFP upper drawer) 1312-0,1,2,8 1313  
Sub-codes 0, 2, 8: 0/0/0 
Sub-code 1: 80,000/80,000/80,000
Separation roller 
(PFP lower drawer) 1314-0,1,2,8 1315  
Sub-codes 0, 2, 8: 0/0/0 
Sub-code 1: 80,000/80,000/80,000
Separation roller 
(Bypass unit) 1316-0,1,2,8 1317 
Sub-codes 0,...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 150

(1) Turn ON the power while [0] and [8] are pressed  simultaneously.
(2) Key in the code “257” with the digital keys and  press the [START] button (the following is dis-
played).
Note: Note:  Before performing the following operations, note th e current counter values.
 Fig. 2-4
(3) Key in the value “1” or “2” with the digital key and press the [START] button.
The value entered is displayed on the left...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 151
2
(4) Press the [ENTER] button to complete overwriting of  the counter value.
Note: Note: 
The screen returns to the code entry screen without  copying (overwriting) the value when the 
[CANCEL] button is pressed.
 Key in “2” to copy the value of the backup 
counter (SYS board) (B) onto the value of  
the total counter (LGC board) (A).
 Fig. 2-6
(A) (B)
05/12  

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 152
2.2.8 Setting mode (08) (e-STUDIO202L/232/282)
Procedure 1 
* Press [FUNCTION CLEAR] to enter minus (-). 
Procedure 2 
Procedure 3 
Procedure 4 
* Press [FUNCTION CLEAR] to enter minus (-). 
Procedure 5 
* Press [HELP] to enter “-”.
The items in the setting code list can be set or ch
anged in this setting mode (08).
(Stores value in RAM)
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key](Code) [START]...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 153
2
Procedure 7 
Procedure 9 
Procedure 10 
Procedure 11 and 12 
*1.  Press [MONITOR/PAUSE] to enter “-”, when enteri ng telephone number.
*2.  The data are stored in SYS-RAM in procedure 11  and stored in NIC-RAM in procedure 12.
Procedure 14
[0][8]
[POWER] [POWER] OFF/ON
(Exit)
[Digital key]
(Code)[Digital key]
(Setting)
[CLEAR]
(Corrects value)
[START](HDD formatting)
[CANCEL]
[ENTER]
or
[INTERRUPT]...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 154
Notes:  The digit after the hyphen in “Code” of the follow ing table is a sub code.
 e-STUDIO202L/232/282: In “RAM”, the NVRAM of the bo ard in which the data of each code
is stored is indicated. “M” stands for the LGC boar d, “SYS”, “NIC”  
and “UTY” stands for the SYS board.
Setting mode (08) 
Code Classifi-
cation Items
Func-
tion Default
 RAM Contents
Proce-
dure
200 General Date and time setting...