Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 185
2
535 Fuser Temperature drop control  setting during printing 
(Temperature/Time) ALL 2
 M 0: None 
1: Pattern 1
2: Pattern 2 
3: Pattern 3
4: Pattern 4 
5: Pattern 5 
6: Pattern 6
7: Pattern 7 
8: Pattern 8 
9: Pattern 9 
10: Pattern 10 
11: Pattern 11 
12: Pattern 12 
13: Pattern 13 
14: Pattern 14 
15: Pattern 15
16: Pattern 16 
17: Pattern 17 
18: Pattern 18
19: Pattern 19 
20: Manual adjustment 1...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 186
604 User 
interface Default setting for APS/ 
AMS PPC 0
 SYS 0: APS (Automatic 
Paper Selection)
1: AMS (Automatic 
Magnification Selec-
tion)
2: Not selected 1
605 User  interface Centering printing of pri- 
mary/secondary direction  
at AMS PPC 1
 SYS 0: Invalid 1: Valid 1
607 User  interface Default setting of RADF  
mode PPC 0
 SYS 0: Continuous feeding 
(by pressing the  
[START] button)
1: Single...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 187
2
619 Paper  feeding Time lag before Auto Job  
Start of bypass feeding ALL 4
 SYS Sets the time taken to 
add paper feeding  
when paper in the  
bypass tray has run out 
during the bypass feed  
copying. 
0: Paper is not drawn in unless the  
[START] button is  
pressed.
1-10: Setting value x  
0.5 sec. 1
620 User  interface Department management  
setting (Copier) PPC 1
 SYS 0: Invalid
1: Valid 1
621...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 188
638 General Time differences ALL EUR: 24
UC: 40JPN: 6
 SYS 0: +12.0h 1: +11.5h
2: +11.0h 3: +10.5h 
4: +10.0h 5: +9.5h 
6: +9.0h 7: +8.5h
8: +8.0h 9: +7.5h 
10: +7.0h 11: +6.5h 
12: +6.0h 13: +5.5h
14: +5.0h 15: +4.5h 
16: +4.0h 17: +3.5h 
18: +3.0h 19: +2.5h 
20: +2.0h 21: +1.5h 
22: +1.0h 23: +0.5h 
24: 0.0h 25: -0.5h 
26: -1.0h 27: -1.5h 
28: -2.0h 29: -2.5h 
30: -3.0h 31: -3.5h
32: -4.0h 33: -4.5h...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 189
2
648 User  interface Returning finisher tray  
when printing is finished ALL 0
 SYS Sets whether or not 
returning the finisher  
tray to the bin 1 when  
printing is finished.
0: Not returned 
1: Returned 1
649 User  interface Magazine sort setting PPC 0
SYS 0: Left page to right 
page
1: Right page to left  page 1
650 User  interface 2 in 1/4 in 1 page allocating  
order setting PPC 0
 SYS 0:...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 190
662 General Clearing of SMS partition ALL - SYS Clears SM
S partition.
(Performs when the  
service call [F106] has  
occurred.) 3
666 General /SHR partition clearing ALL - SYS Initializes  the Elec-
tronic Filing. 3
667 General /SHA partition clearing ALL - SYS Initializes  the shared 
folder. 3
670 General HDD diagnostic menu dis- play ALL - SYS Display the HDD infor-
mation 2
671 User  interface Size...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 191
2
680 General Banner advertising display  2 ALL - SYS Maximum 27 letters 
(one-byte character) 11
681 General Display of [BANNER MES- SAGE] button  ALL 0
 SYS 0: Not displayed
1: Displayed 
* This button enables 
the entry of “Banner  
advertising display 1  
(08-679)” and “Ban- 
ner advertising dis- 
play 2 (08-680)” on  
the control panel. 1
682 User  interface Offsetting between jobs ALL 1
SYS 0:...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 192
695 General Notifying condition of trial 
period end PRT/
SCN 3
 SYS Sets when the end of 
trial period is notified. 
0: On the day it ends 
1 to 59: n days before 1
696 Scram- bler 
board Installation of scrambler  
board (Option)
ALL 0
 - 0: Not installed
1: Installed 2
697 Paper  feeding Paper type priority PPC 1
SYS Sets the paper type pri-
ority during copying. 
1: Plain paper 
2: Thick paper 1 1...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 193
2
704-0 User  interface Interruption of  
stapling oper- 
ation (no sta- 
ple) Copying ALL 1
SYS 0:  Continues printing 
by switching sort  
setting
1:  Interrupts printing 4
704-1 Printing /  BOX print- 
ingALL 1
 SYS 0:  Continues printing 
by switching sort 
setting
1:  Interrupts printing 4
707 Mainte- nance Remote-controlled service 
HTTP initially-registered  
server 
URL setting ALL https://...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 194
728 Mainte-
nance HTTP proxy port number  
setting ALL 0
 SYS 1
729 Mainte- nance HTTP proxy ID setting ALL - SYS Maximum 30 letters 11
730 Mainte- nance HTTP proxy password set-
ting ALL - SYS Maximum 30 letters 11
731 Mainte- nance HTTP proxy panel display ALL 1
SYS 0: Valid
1: Invalid 1
732 Mainte- nance 
(Remote) Automatic ordering func- 
tion of supplies
ALL 3
 SYS 0: Ordered by FAX
1: Ordered by...