Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 155
2
206 User  interface Auto Shut Off Mode timer  
setting (Auto Shut Off  
Mode/Sleep Mode) ALL Refer to 
content SYS Timer to turn OFF the 
power or to enter the 
Sleep Mode automati- 
cally when the equip-
ment has not been  
used 
(Refer to 08-601)
0: 3min. 1: 5min. 
2: 10min. 3: 15min. 
4: 20min. 5: 25min. 
6: 30min. 7: 40min. 
8: 50min. 9: 60min. 
10: 70min. 
11: 80min. 
12: 90min. 
13: 100min.
14:...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 156
221 User 
interface Language selection in UI  
data at Web power ON ALL EUR: 0
UC: 0
JPN: 5
 SYS 0: Language 1
1: Language 2 
2: Language 3 
3: Language 4
4: Language 5 
5: Language 6 
6: Language 7 1
224 Paper  feeding Paper size for bypass feed PPC UNDEF SYS Press the butto
n on the 
LCD to select the size. 9
225 Paper  feeding Paper size for upper  
drawer ALL EUR: A4
UC: LT
JPN: A4 M Press the button...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 157
2
237 Paper  feeding Paper size (ST-R) feeding/ 
widthwise direction ALL 216/140
 M 10
238 Paper  feeding Paper size (COMPUTER)  
feeding/widthwise direction ALL 356/257
 M 10
239 Paper  feeding Paper size (FOLIO) feed- 
ing/widthwise direction ALL 330/210
 M 10
240 Paper  feeding Paper size (13” LG) feed-
ing/widthwise direction ALL 330/216
 M 10
241 Paper  feeding Paper size (8.5”X8.5”)...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 158
251 Mainte-
nance Setting value of PM  
counter ALL Refer to 
content
 M 
e-STUDIO200L 
UC, EUR: 64,000 
JPN: 0
e-STUDIO 230 
UC, EUR: 74,000 
JPN: 0
e-STUDIO 280 
UC, EUR: 90,000 
JPN: 0 1
252 Mainte- nance Current value of PM 
counter Display/0 clearing ALL 0
 M Counts up when the 
registration sensor is  
ON. 1
253 Mainte- nance Error history display ALL - SYS Displaying of the lates
t 
20 errors data...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 159
2
255 Paper  feeding PFP/LCF installation ALL 0
 M Sets the installation sta-
tus of the PFP or LCF,  
and also disables its  
functions and the lower 
drawer of the equip- 
ment. 
When 0 is set at 08-
477, specify the value  
from 1 to 4 or 16 to 20,  
and when 1 is set at  
08-477, specify the  
value only from 32 to  
36. 
0: Auto 
When only the upper  
drawer is installed as 
the paper feeder of the...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 160
257 Counter Counter copy ALL -
- 1) Electrical counter  
 Backup counter
2) Backup counter   
Electrical counter 
(P. 2-239 Fig. 2-7) -
258 Mainte- nance FSMS acceptance ALL 1
SYS Sets whether the FSMS 
connection is accepted  
or not. 
0: Prohibited 
1: Accepted (USB nor-
mal connection)
2: Accepted (USB  forcible connection) 1
259 Network Storage period trial and pri- vate PRT 14
 SYS 0: No limits
1 to...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 161
2
270 Elec- tronic Fil-ing Default value for user box  
retention period
ALL 0
 SYS Sets the data retention 
period when creating a  
user box. 
0: Not deleted
1 to 999: Retention  
period (Unit: Day) 1
271 General Warning notification of the  File Share and e-Filling  
partitions are filled ALL 90
 SYS Sets the percentage of 
HDD partition filled  
when warning notifica- 
tion is sent. 
0 to 100: 0 to...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 162
284 User 
interface Default setting of scanning  
mode SCN 0
 SYS 0: Single 1: Book
2: Tablet 1
285 User  interface Default setting of rotation  
angle of original SCN 0
 SYS 0: 0 degree
1: 90 degrees 
2: 180 degrees 
3: 270 degrees 1
286 User  interface Default setting of original  
paper size SCN 0
 SYS 0: Automatic
1: A3 2: A4 
3: LD 4: LT
5: A4-R 6: A5-R 
7: LT-R 8: LG 
9: B4 10: B5
11: ST-R 12: COMP...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 163
2
295 Network Raw printing job (receiving tray) PRT 0
 SYS 0: Inner tray
1: Finisher tray 1 
2: Finisher tray 2 
3: Not used
4: Job Separator upper tray
5: Job Separator lower  tray
* The settings 4 and 5 
are effective only 
when the Job Sepa- 
rator (MJ-5004) is  
installed. 1
296 Network Raw printing job (Number of form lines) PRT 1200
 SYS Sets the number of 
form lines from 5 to  
128. (A...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 164
305-0 Counter Number of 
output pages  
in copier func- 
tionA3 PPC 0
SYS Counts the output 
pages in the copier  
function for each paper  
size according to the 
setting for the count  
setting of large-sized  
paper (08-352) and the 
definition setting of  
large-sized paper (08- 
353). 4
305-1 A4 
305-2 A5
305-3 A6 
305-4 B4 
305-5 B5 
305-6 FOLIO 
305-7 LD 
305-8 LG 
305-9 LT
305-10 ST
305-11 COMP...