Toshiba Estudio 230 Manual

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 15
2
2DA7 Failed to acquire resource. Resource acquiring f ailure P. 5-88
2DC0 Job canceled Job canceling -
2DC1 Power failure occurred Power failure P. 5-89
Error code
Message displayed in the 
TopAccess screen Contents Troubleshooting 

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 16
6) E-mail reception related error (when GM-1020/3020, 1030/3030, 2020 or 2030 is inst alled (e-STUDIO200L/230/280))
(when GM-1070/4070, 1080U/4080U, 2070 or 2080U is i nstalled (e-STUDIO202L/232/282))
Error codeMessage displayed in the 
TopAccess screen Contents Troubleshooting
3A10 MIME Error has been detected in  the received mail. E-mail MIME error P. 5-90
3A11 MIME Error has been detected in  the...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 17
2
3A80 Partial mail was received during  the partial mail setting is disabled. Partial mail reception setting OFF P. 5-90
3A81 Partial mail was received during  the partial mail setting is disabled.  
This mail has been transferred to 
the administrator. P. 5-90
3A82 Partial mail was received during  the partial mail setting is disabled. 
This mail could not be transferred  
to the administrator. P. 5-90...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 18
3C10 Tiff Analyze Error has been 
detected in the received mail. TIFF analysis error P. 5-91
3C11 Tiff Analyze Error has been  detected in the received mail.  
This mail has been transferred to 
the administrator. P. 5-91
3C12 Tiff Analyze Error has been  detected in the received mail. 
This mail could not be transferred  
to the administrator. P. 5-91
3C13 Tiff Analyze Error has been  detected in the...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 19
2
3C60 Offramp Security Error has been  detected in the received mail. Offramp security error P. 5-91
3C61 Offramp Security Error has been  detected in the received mail.  
This mail has been transferred to 
the administrator. P. 5-91
3C62 Offramp Security Error has been  detected in the received mail. 
This mail could not be transferred  
to the administrator. P. 5-91
3C70 Power Failure has been occurred...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 20
2.1.4 Printer function error
Following codes are displayed at the end of the use
r name on the print job log screen
(when GM-1020/3020, 1030/3030, 2020 or 2030 is inst alled (e-STUDIO200L/230/280))
(when GM-1070/4070, 1080U/4080U, 2070 or 2080U is i nstalled (e-STUDIO202L/232/282))
Error code Contents Troubleshooting
4030 No printer kit / Invalid: When the printer kit  or printer/scanner kit is not...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 21
2
 
In the setting mode (08-253), the latest twenty gro ups of error data will be displayed.Display example
EA10
04 07 11 17 57 3206406423621000000
Error code YY MM DD HH MM SS MMM NNN ABCDEFHIJLO 
4 digits 12 digits (Year is indicated  with its last two digits.) 3 digits 3 digits 11 digits
A Paper source
0: Not selected 1: Bypass feed 2: LCF 3: PFP upper  drawer 4: Unused 5: PFP lower drawer 6: Unused...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 22
2.2 Self-diagnosis Modes
Note: Note: 
To enter the desired mode, turn ON the power while  two digital keys designated to each mode 
(e.g. [0] and [5]) are pressed simultaneously.
 
 Control panel check mode (01):
Notes:  1. A mode can be canceled by [POWER] OFF/ON when the  LED is lit and the LCD is blinking.
2. Button Check
Buttons with LED (Press to turn OFF the LED.) 
Buttons without LED (Press to...

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 23
2
 List print mode (9S): The procedure varies dependi ng on the code.
 PM support mode (6S): 
 Firmware update mode (89): Refer to “6. FIRMWARE U PDATING”.
 Fig. 2-1
*1 Turn OFF the power after using the self-diagnosis modes, and leave the equipment to the user.
[9][START]
[POWER] (Code) 
101: Adjustment mode (05) 
102: Setting mode (08) 
(Code) 
103: PM support mode 
104: Stored information of pixel...

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 24
2.2.1 Input check (Test mode 03) (e-STUDIO200L/230/2
80)

Note: Note: 
Initialization is performed before the equipment en ters the test mode.
 Fig. 2-2 Example of display during input check
Items to be checked and the condition of the equipm ent when the buttons [A] to [H] are highlighted are 
listed in the following pages. The status of each input signal can be checked by p
ressing the [FAX] button, and...