Toshiba Estudio 230 Manual
Here you can view all the pages of manual Toshiba Estudio 230 Manual. The Toshiba manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 441
![Page 441
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 11
5
[E950] Jam not reaching the JSP feed sensor
[E951] Stop jam at the JSP feed sensor
Open the JSP cover. Is there any paper on the trans port path?
YES
Remove the paper.
NO
Is the JSP feed sensor working?
(Perform the input check in the test mode: 03-[FAX] ON/[3]/[H])
l l l ll l ll l ll
NO
1) Check if the connector of the JSP feed sensor is disconnected.
2) Check if either of the connectors CN260 or CN262 on the JSP...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-440.png "Page 441
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 11
5
[E950] Jam not reaching the JSP feed sensor
[E951] Stop jam at the JSP feed sensor
Open the JSP cover. Is there any paper on the trans port path?
YES
Remove the paper.
NO
Is the JSP feed sensor working?
(Perform the input check in the test mode: 03-[FAX] ON/[3]/[H])
l l l ll l ll l ll
NO
1) Check if the connector of the JSP feed sensor is disconnected.
2) Check if either of the connectors CN260 or CN262 on the JSP...")
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING 5 - 11 5 [E950] Jam not reaching the JSP feed sensor [E951] Stop jam at the JSP feed sensor Open the JSP cover. Is there any paper on the trans port path? YES Remove the paper. NO Is the JSP feed sensor working? (Perform the input check in the test mode: 03-[FAX] ON/[3]/[H]) l l l ll l ll l ll NO 1) Check if the connector of the JSP feed sensor is disconnected. 2) Check if either of the connectors CN260 or CN262 on the JSP...
Page 442
![Page 442
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 12
[EB50] Paper left on the transport path due to multi ple feeding
In case the paper is fed from the upper drawer, byp ass unit or ADU:
Open the transfer cover. Is there any paper in front of the registration sensor?
YES
Remove the paper.
NO
When the paper is fed from the upper drawer:
Is the 1st transport sensor working? (Perform the i nput check: 03-[FAX]OFF/[6]/[E])
l ll l ll l l
NO
1) Check if the connector of the 1st...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-441.png "Page 442
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 12
[EB50] Paper left on the transport path due to multi ple feeding
In case the paper is fed from the upper drawer, byp ass unit or ADU:
Open the transfer cover. Is there any paper in front of the registration sensor?
YES
Remove the paper.
NO
When the paper is fed from the upper drawer:
Is the 1st transport sensor working? (Perform the i nput check: 03-[FAX]OFF/[6]/[E])
l ll l ll l l
NO
1) Check if the connector of the 1st...")
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC 5 - 12 [EB50] Paper left on the transport path due to multi ple feeding In case the paper is fed from the upper drawer, byp ass unit or ADU: Open the transfer cover. Is there any paper in front of the registration sensor? YES Remove the paper. NO When the paper is fed from the upper drawer: Is the 1st transport sensor working? (Perform the i nput check: 03-[FAX]OFF/[6]/[E]) l ll l ll l l NO 1) Check if the connector of the 1st...
Page 443
![Page 443
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 13
5
YES
Is the registration sensor working?
(Perform the input check in the test mode: 03-[FAX] ON/[2]/[A])
l l l ll l l l
NO
1) Check if the connector of the registration sensor is disconnected.
2) Check if the connector CN305 on the LGC board is disconnected.
3) Check if the connector pins are disconnected and the harnesses are
open circuited.
4) Check if the conductor pattern on the LGC board i s short circuited or...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-442.png "Page 443
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 13
5
YES
Is the registration sensor working?
(Perform the input check in the test mode: 03-[FAX] ON/[2]/[A])
l l l ll l l l
NO
1) Check if the connector of the registration sensor is disconnected.
2) Check if the connector CN305 on the LGC board is disconnected.
3) Check if the connector pins are disconnected and the harnesses are
open circuited.
4) Check if the conductor pattern on the LGC board i s short circuited or...")
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING 5 - 13 5 YES Is the registration sensor working? (Perform the input check in the test mode: 03-[FAX] ON/[2]/[A]) l l l ll l l l NO 1) Check if the connector of the registration sensor is disconnected. 2) Check if the connector CN305 on the LGC board is disconnected. 3) Check if the connector pins are disconnected and the harnesses are open circuited. 4) Check if the conductor pattern on the LGC board i s short circuited or...
Page 444
![Page 444
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 14
[EB60] Paper left on the transport path due to multi ple feeding
Open the transfer cover. Is there any paper in fron t of the registration sensor?
YES
Remove the paper.
NO
Is the registration sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E])
l l ll l ll l
NO
1) Check if the connector of the registration sensor is disconnected.
2) Check if the connector CN305 on the LGC board is...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-443.png "Page 444
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 14
[EB60] Paper left on the transport path due to multi ple feeding
Open the transfer cover. Is there any paper in fron t of the registration sensor?
YES
Remove the paper.
NO
Is the registration sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E])
l l ll l ll l
NO
1) Check if the connector of the registration sensor is disconnected.
2) Check if the connector CN305 on the LGC board is...")
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC 5 - 14 [EB60] Paper left on the transport path due to multi ple feeding Open the transfer cover. Is there any paper in fron t of the registration sensor? YES Remove the paper. NO Is the registration sensor working? (Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E]) l l ll l ll l NO 1) Check if the connector of the registration sensor is disconnected. 2) Check if the connector CN305 on the LGC board is...
Page 445
![Page 445
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 15
5
5.1.2 Paper misfeeding
[E110] ADU misfeeding Open the transfer cover. Is there any paper in fron t of the 1st transport sensor?
YES
Remove the paper.
NO
Is the 1st transport sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E])
l l l ll l ll
NO
1) Check if the connector of the 1st transport senso r is disconnected.
2) Check if the connector CN305 on the LGC board is disconnected.
3) Check if...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-444.png "Page 445
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 15
5
5.1.2 Paper misfeeding
[E110] ADU misfeeding Open the transfer cover. Is there any paper in fron t of the 1st transport sensor?
YES
Remove the paper.
NO
Is the 1st transport sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E])
l l l ll l ll
NO
1) Check if the connector of the 1st transport senso r is disconnected.
2) Check if the connector CN305 on the LGC board is disconnected.
3) Check if...")
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING 5 - 15 5 5.1.2 Paper misfeeding [E110] ADU misfeeding Open the transfer cover. Is there any paper in fron t of the 1st transport sensor? YES Remove the paper. NO Is the 1st transport sensor working? (Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E]) l l l ll l ll NO 1) Check if the connector of the 1st transport senso r is disconnected. 2) Check if the connector CN305 on the LGC board is disconnected. 3) Check if...
Page 446
![Page 446
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 16
[E120] Bypass misfeeding Open the transfer cover. Is there any paper in fron t of the 1st transport sensor?
YES
Remove the paper.
NO
Is the 1st transport sensor working?
(Perform the input check in the test mode: 03-[FAX] ON/[6]/[E])
l l l ll l ll
NO
1) Check if the connector of the 1st transport senso r is disconnected.
2) Check if the connector CN305 on the LGC board is disconnected.
3) Check if the connector pins are...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-445.png "Page 446
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 16
[E120] Bypass misfeeding Open the transfer cover. Is there any paper in fron t of the 1st transport sensor?
YES
Remove the paper.
NO
Is the 1st transport sensor working?
(Perform the input check in the test mode: 03-[FAX] ON/[6]/[E])
l l l ll l ll
NO
1) Check if the connector of the 1st transport senso r is disconnected.
2) Check if the connector CN305 on the LGC board is disconnected.
3) Check if the connector pins are...")
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC 5 - 16 [E120] Bypass misfeeding Open the transfer cover. Is there any paper in fron t of the 1st transport sensor? YES Remove the paper. NO Is the 1st transport sensor working? (Perform the input check in the test mode: 03-[FAX] ON/[6]/[E]) l l l ll l ll NO 1) Check if the connector of the 1st transport senso r is disconnected. 2) Check if the connector CN305 on the LGC board is disconnected. 3) Check if the connector pins are...
Page 447
![Page 447
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 17
5
[E130] Upper drawer misfeeding (paper not reaching t he 1st transport sensor)
Open the transfer cover. Is there any paper in fron t of the 1st transport sensor?
YES
Remove the paper.
NO
Is the 1st transport sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E])
l ll l ll l l
NO
1) Check if the connector of the 1st transport senso r is disconnected.
2) Check if the connector CN305 on the LGC...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-446.png "Page 447
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 17
5
[E130] Upper drawer misfeeding (paper not reaching t he 1st transport sensor)
Open the transfer cover. Is there any paper in fron t of the 1st transport sensor?
YES
Remove the paper.
NO
Is the 1st transport sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E])
l ll l ll l l
NO
1) Check if the connector of the 1st transport senso r is disconnected.
2) Check if the connector CN305 on the LGC...")
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING 5 - 17 5 [E130] Upper drawer misfeeding (paper not reaching t he 1st transport sensor) Open the transfer cover. Is there any paper in fron t of the 1st transport sensor? YES Remove the paper. NO Is the 1st transport sensor working? (Perform the input check in the test mode: 03-[FAX] OFF/[6]/[E]) l ll l ll l l NO 1) Check if the connector of the 1st transport senso r is disconnected. 2) Check if the connector CN305 on the LGC...
Page 448
![Page 448
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 18
[E140] Lower drawer misfeeding (paper not reaching t he 2nd transport sensor)
Open the side cover. Is there any paper in front of the 2nd transport sensor?
YES
Remove the paper.
NO
Is the 2nd transport sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[7]/[E])
l l l ll l ll
NO
1) Check if the connector of the 2nd transport sensor is disconnected.
2) Check if the connector CN304 on the LGC board is...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-447.png "Page 448
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 18
[E140] Lower drawer misfeeding (paper not reaching t he 2nd transport sensor)
Open the side cover. Is there any paper in front of the 2nd transport sensor?
YES
Remove the paper.
NO
Is the 2nd transport sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[7]/[E])
l l l ll l ll
NO
1) Check if the connector of the 2nd transport sensor is disconnected.
2) Check if the connector CN304 on the LGC board is...")
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC 5 - 18 [E140] Lower drawer misfeeding (paper not reaching t he 2nd transport sensor) Open the side cover. Is there any paper in front of the 2nd transport sensor? YES Remove the paper. NO Is the 2nd transport sensor working? (Perform the input check in the test mode: 03-[FAX] OFF/[7]/[E]) l l l ll l ll NO 1) Check if the connector of the 2nd transport sensor is disconnected. 2) Check if the connector CN304 on the LGC board is...
Page 449
![Page 449
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 19
5
[E150] PFP upper drawer misfeeding (paper not reachi ng the PFP upper drawer feed sensor)
Open the PFP side cover. Is there any paper in fron t of the PFP upper drawer feed sensor?
YES
Remove the paper.
NO
Is the PFP upper drawer feed sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[2]/[D])
l l ll l ll l ll l l
NO
1) Check if the connector of the PFP upper drawer fe ed sensor is dis-
connected....](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-448.png "Page 449
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING
5 - 19
5
[E150] PFP upper drawer misfeeding (paper not reachi ng the PFP upper drawer feed sensor)
Open the PFP side cover. Is there any paper in fron t of the PFP upper drawer feed sensor?
YES
Remove the paper.
NO
Is the PFP upper drawer feed sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[2]/[D])
l l ll l ll l ll l l
NO
1) Check if the connector of the PFP upper drawer fe ed sensor is dis-
connected....")
June 2004 © TOSHIBA TECe-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING 5 - 19 5 [E150] PFP upper drawer misfeeding (paper not reachi ng the PFP upper drawer feed sensor) Open the PFP side cover. Is there any paper in fron t of the PFP upper drawer feed sensor? YES Remove the paper. NO Is the PFP upper drawer feed sensor working? (Perform the input check in the test mode: 03-[FAX] OFF/[2]/[D]) l l ll l ll l ll l l NO 1) Check if the connector of the PFP upper drawer fe ed sensor is dis- connected....
Page 450
![Page 450
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 20
[E160] PFP lower drawer misfeeding (paper not reachi ng the PFP lower drawer feed sensor)
Open the PFP side cover. Is there any paper in fron t of the PFP lower drawer feed sensor?
YES
Remove the paper.
NO
Is the PFP lower drawer feed sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[4]/[D])
l l ll l ll l ll l l
NO
1) Check if the connector of the PFP lower drawer fe ed sensor is dis-
connected.
2)...](http://img.usermanuals.tech/thumb/76/103453/w300_estudio-230-manual-1513181221_d-449.png "Page 450
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC
5 - 20
[E160] PFP lower drawer misfeeding (paper not reachi ng the PFP lower drawer feed sensor)
Open the PFP side cover. Is there any paper in fron t of the PFP lower drawer feed sensor?
YES
Remove the paper.
NO
Is the PFP lower drawer feed sensor working?
(Perform the input check in the test mode: 03-[FAX] OFF/[4]/[D])
l l ll l ll l ll l l
NO
1) Check if the connector of the PFP lower drawer fe ed sensor is dis-
connected.
2)...")
e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTINGJune 2004 © TOSHIBA TEC 5 - 20 [E160] PFP lower drawer misfeeding (paper not reachi ng the PFP lower drawer feed sensor) Open the PFP side cover. Is there any paper in fron t of the PFP lower drawer feed sensor? YES Remove the paper. NO Is the PFP lower drawer feed sensor working? (Perform the input check in the test mode: 03-[FAX] OFF/[4]/[D]) l l ll l ll l ll l l NO 1) Check if the connector of the PFP lower drawer fe ed sensor is dis- connected. 2)...