Toshiba Bex4t2g Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-57
 
  
(3)  Select  the  “Automatically  remove  all  TEC 
Printer Drivers”, and click the [Next] button.  
         
(4)  Click  the  [Finish]  button  to  start  to  delete  the printer drivers.  
          
(5)  When  the  “Restart  System”  screen  is  displayed, click the [Restart] button.  
           
(6)  When  the  printer  driver  is  deleted  successfully,  the  screen  on  the  right  is 
displayed....

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.7 Installing the Printer Drivers
 
    E2-58
 
Note: In  the  case  that  a  network  printer  has  been  insta lled  in  multiple  user  accounts  under 
Windows Vista/server 2008/7/Server2008R2, it is not  possible to delete the printer driver.  
You  must  first,  delete  the  printer  icon  from  each  u ser  account,  then  delete  the  printer 
driver.  
 



 Deleting the setup information configured during t he preparation 
(1)  Select the “Start”,...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.8 Print Test
 
 
E2-59
2.8 Print Test 
 
 
 
 
 
 
 
 After your operating environment has been set, perform a print 
test. 
 
1. Perform a print test by using the Printer Driver or an Issue 
Command. 
 
  The printer driver’s Properties screen allows you to set the 
communication conditions, media size, and other printing 
conditions in accordance with your operating environment.  For 
details, refer to the Help for the Windows Printer Drivers 
screen....

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.8 Print Test
 
 
E2-60
2.8  Print Test (Cont.) 
 
 „ When using a Strip Module or an optional Cutter Module  
It is necessary to set the issue mode, cut/strip position, etc. on the 
Printer Driver or with TPCL (TEC Printer Command Language) in 
accordance with your printing condition.   
For details of the TPCL, refer to the B-EX4T/EX6T Series 
External Equipment Interface Specification.  
Regarding how to use the Printer Driver, refer to the Help for the...

2. PRINTER SETUP ENGLISH VERSION EO1-33094 
2.9 Position and Print Tone Fine Adjustment
 
 
E2-61
2.9 Position and Print 
Tone Fine  
Adjustment 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2.9.1 Fine Adjustment 
 
 
  This section describes how to fine adjust a print start position, 
cut/strip position, reverse feed amount, print tone, and ribbon 
motor torque. 
When a fine adjustment is required, follow the procedure below.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Contents of the Fine Adjustment...

2. PRINTER SETUP ENGLISH VERSION EO1-33094 
2.9 Position and Print Tone Fine Adjustment
 
 
E2-62
2.9.1  Fine Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  (1) FEED ADJ.  
  Print start position is shifted by fine adjusting the feed amount.  
 
 
 
 
• Example of Print Start Position Fine Adjustment 
 
  When setting +3.0 mm 
  Compared with “+0.0mm” position, the print start 
position is shifted forward. 
 
 
 
 
  When setting +0.0 mm
 
  
 
 
 
  When setting –3.0 mm
 
  Compared with “+0.0mm”...

2. PRINTER SETUP ENGLISH VERSION EO1-33094 
2.9 Position and Print Tone Fine Adjustment
 
 
E2-63
2.9.1  Fine Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  (2) CUT ADJ.  
  Cut position or peel-off position is shifted by fine adjusting the 
feed amount.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
• Example of Peel-off Position Fine Adjustment 
 
  When setting +3.0 mm  
  Compared with “+0.0mm” position, the peel-off 
position is shifted forward. 
 
 
 
 
  When...

2. PRINTER SETUP ENGLISH VERSION EO1-33094 
2.9 Position and Print Tone Fine Adjustment
 
 
E2-64
2.9.1  Fine Adjustment (Cont.) 
 
 
  (3) BACK ADJ. 
  Reverse feed amount to the next print start position is fine 
adjusted. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
• Example of Reverse Feed Amount Fine Adjustment 
 
  When setting +3.0 mm  
  Compared with “+0.0mm” position, the print start position 
after a reverse feed is shifted forward. 
 
 
 
 
  When setting +0.0...

2. PRINTER SETUP ENGLISH VERSION EO1-33094 
2.9 Position and Print Tone Fine Adjustment
 
 
E2-65
2.9.1  Fine Adjustment (Cont.) 
 
 
 
 
 
 
 
  (4) X ADJUST 
  Print position in X-coordinate (horizontal direction) is fine 
adjusted.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ABC 
 
ABC 
 
            ABC 
50.0mm
50.0mm Top Down Printing
X 
Y 
Bottom First Printing
X 
Y
99.5mm
-99.5mm
99.4mm
-99.4mm
• Example of X Coordinate Fine Adjustment 
 
  When setting –50.0 mm  
  Compared with “+0.0mm”...

2. PRINTER SETUP ENGLISH VERSION EO1-33094 
2.9 Position and Print Tone Fine Adjustment
 
 
E2-66
2.9.1  Fine Adjustment (Cont.) 
 
 
 
 
 
 
 
 
  (5) TONE ADJ.(TRANS.) 
  Print tone for the thermal transfer printing is fine adjusted. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(6) TONE ADJ.(DIRECT.) 
  Print tone for the direct thermal printing is fine adjusted. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(7) RBN ADJ. 
  When the ribbon is slack or wrinkled and printing is affected, 
fine adjust the ribbon motor torque....