Toshiba Bex4t2g Manual

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.2 Ribbon 
 
E7-9
 
Positional Relationship between Core and Ribbon 
 
 
 
 
 
 
 
 
NOTE: Wind the ink ribbon so that the ribbon center aligns with the core center. 
 
 
Fig. 3:  Connection between Leader Tape and Ribbon 
 
 
 
 
 
 
 
 
 
NOTES on using ribbon:  
 
If the difference between the ribbon width and the paper width is too large, the ribbon may wrinkle. Refer 
to the table below and choose the paper appropriate to the ribbon width. Even if...

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.3 Recommended Media and Ribbon Types 
 
E7-10
 
 
7.3  Recommended Media and Ribbon Types 
APPROVED PAPER 
 
 
 
Type Item Code Manufacturer  
Type No. Paper 
Thickness 
(µm) Manufacturer Remarks 
 150LA-1P 82 RICOH   
      
Direct 
thermal 
type 
      
 Vellum  Raflatac  (Uncoated) 
  Transtherm 1C     Fasson  (Coated, gloss) 
 VES-85 85 OSAKA SEALING 
PRINTING (Yupo) 
FR1412-50 White PET  50  LINTEC   
FR1615-50  Silver chemical mat  50  LINTEC...

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.3 Recommended Media and Ribbon Types 
 
E7-11
 
APPROVED RIBBONS 
 
 
Type:   W: Wax   SR: Semi-resin   R: Resin 
 
 
NOTE: 
1.  Print conditions and paper to be used may differ for each ribbon.  
 
Applicable models 
(indicated with {) Item Code 
(Grobal) Base 
Thickness 
(µm) Type Remarks 
G T  H 
BEX-*****AW3 4.5 W   { { 
 
BEX-*****AW5 4.5 W T.B.D { { 
 
BEX-*****AW6F 4.5 W   { { 
 
BEX-*****AW7F 4.5 W   { { 
 
BEX-*****AG3 4.5 SR  { {...

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.3 Recommended Media and Ribbon Types 
 
E7-12
 
PRINT TONE FINE ADJUSTMENT VALUES BY SUPPLIES 
 
For 203dpi model 
Print speed Print 
Mode Ribbon Paper 
3”/s 6”/s 10”/s 12”/s Print 
energy type Remarks 
Vellum  -2 -2 -2 +2  Wax1 This combination is not 
acceptable in the case of 
10, 12ips and high 
temperature environment. 
TT1C 0 0 +2 +2 Wax1 In the case of 10, 12ips 
and low temperature 
environment requires 
a print tone adjustment 
to positive...

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.3 Recommended Media and Ribbon Types 
 
E7-13
 
Print speed Print 
Mode Ribbon Paper 
3”/s 6”/s 10”/s 12”/s Print 
energy type Remarks 
FR1412-50 +6  +4  unusable  Resin1  BEX-*****AS1 
FR1615-50 +2  +2  unusable  Resin1  
Vellum -4 -6 0 +2 Wax1 This combination is not 
acceptable in the case of all 
print speed and high 
temperature environment. 
TT1C -4 -2 +4 +6 Wax1  
Thermal 
transfer 
type 
BEX-*****SW1 
I-BEST S  0  0  +4  unusable Wax1...

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.3 Recommended Media and Ribbon Types 
 
E7-14
 
For 300dpi model 
Print speed Print 
Mode Ribbon Paper 
3”/s 5”/s 8”/s 10”/s 12”/s Print 
energy type Remarks 
Vellum +4 0 +4 +6 Unusa
ble Wax1 In the case of 3, 5, 8ips 
and high temperature 
environment requires 
a print tone adjustment 
to negative direction. 
TT1C +4 +2 +6 Unusable Wax1 In the case of 8ips 
and low temperature 
environment requires 
a print tone adjustment 
to positive direction....

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.3 Recommended Media and Ribbon Types 
 
E7-15
 
 
Print speed Print 
Mode Ribbon Paper 
3”/s 5”/s 8”/s 10”/s 12”/s Print 
energy type Remarks 
150LA-1P  0 0 0 0 0 Standard  
          
Direct 
Thermal 
type  
          
 
NOTES: 
*1: Since the print tones provided in the above table are the recommended values, the variance should be 
taken into consideration when in use. 
*2: The print energy type must be set the above table by all means. For setting...

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.3 Recommended Media and Ribbon Types 
 
E7-16
 
For 600dpi model 
Print speed Print 
Mode Ribbon Paper 
2”/s 3”/s 4”/s 5”/s 6”/s Print 
energy type Remarks 
FR1412-50 +6 +6 +6 +6 +6  Resin1   
FR1615-50 +4 +2 +4 +6 +2  Resin1   
Thermal 
transfer 
type BEX-*****AS1 
           
150LA-1P  0 0 0 0 0 Standard   
           
Direct 
thermal 
type  
           
 
NOTES: 
*1: Since the print tones provided in the above table are the recommended values, the...

7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 
7.4 Care/Handling of Media and Ribbon 
 
E7-17
7.4  Care/Handling of Media and Ribbon 
 
 
  
 
 
 
 
 
•  Do not store the media or ribbon for longer than the manufacturer’s recommended shelf life.  
•  Store media rolls on the flat end.  Do not store them on the curved sides as this might flatten that 
side causing erratic media advance and poor print quality.   
•  Store the media in plastic bags and always reseal after opening.  Unprotected media...

APPENDIX 1  MESSAGES AND LEDS ENGLISH VERSION EO1-33094  
APPENDIX 1  MESSAGES AND LEDS
 
EA1- 1 
APPENDIX 1  MESSAGES AND LEDS 
Appendix 1 describes the LCD messages displayed on  the operation panel.   
Symbols in the message  
1:  : The LED is illuminated.   : The LED is flashing.   : The LED is unlit. 
2: %%,%%%,%%%: Remaining memory size of the externa l memory: 0 to 09,999,999 (in K bytes) 
3: ####: Remaining memory size for PC commands stor age area in the internal memory: 0 to 3072 (in 
K bytes)...