Toshiba Bex4t2g Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33094 
2.9 Position and Print Tone Fine Adjustment
 
 
E2-67
2.9.1  Fine Adjustment (Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  (8) RBN ADJ. 
  When the ribbon is slack or wrinkled and printing is affected, 
fine adjust the ribbon motor torque.  
 
 
 
 
 
 
 
 
 
(9) THRESHOLD  
  When you perform a threshold setting for the reflective sensor and 
found the threshold needs to be adjusted, set a fine adjustment 
value.   
This menu is...

2.PRINTER SETUP ENGLISH VERSION EO1-33094 
2.10 Threshold Setting
 
 
E2-68
2.10 Threshold Setting 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
To maintain a constant print position the printer uses the media 
sensor to detect a print start position according to the difference of 
voltage between a print area and a gap or black mark.  When the 
media is pre-printed, the darker (or more dense) inks can interfere 
with this process causing paper jam errors. 
To get around this problem, first, try an automatic...

2.PRINTER SETUP ENGLISH VERSION EO1-33094 
2.10 Threshold Setting
 
 
E2-69
2.10 Threshold Setting 
(Cont.) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Display example  Explanation 
1 
 
Result: OK (Mid.) 
Threshold is at the midpoint between the 
peak and the baseline. 
2 
 
Result: OK (High) 
Threshold is near the peak voltage, so 
detection of a gap/black mark may fail if 
the voltage difference is very small. 
Adjusting the threshold to the midpoint 
between the peak and the baseline 
enables more accurate...

2.PRINTER SETUP ENGLISH VERSION EO1-33094 
2.10 Threshold Setting
 
 
E2-70
PAUSE
ONLINE
[RESTART] 
Hold down [MODE] 
User System Mode 
PARAMETER SETSoftware Set THRESHOLD SELECT
z REFLECT 
▪ MANUAL SET 
▪ COMMAND SET 
z TRANS. 
▪ MANUAL SET 
▪ COMMAND SET
 
2.10 Threshold Setting 
(Cont.) 
 
 
 (6)  To return to the previous display, press the [LEFT]. 
  To set a fine adjustment value, press the [RIGHT].  The 
threshold fine adjustment screen in ADJUST SET menu 
appears.  
Set a value and press the...

2.PRINTER SETUP ENGLISH VERSION EO1-33094 
2.11 Sensor Setting
 
 
E2-71
2.11  Sensor Setting  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 If a paper jam error still occurs even after a threshold setting has 
been performed, register the voltage level of media to the media 
sensor.   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Contents of the Sensor Adjust Menu  
Menu Parameter 
TEMPERATURE  Displays the ambient temperature and 
print head temperature....

2.PRINTER SETUP ENGLISH VERSION EO1-33094 
2.11 Sensor Setting
 
 
E2-72
2.11 Sensor Setting 
(Cont.) 
 
 (1) REFLECT 
  1.  Select “REFLECT” from the Sensor Adjust menu. 
  2.  Place the tag paper to be used on the reflective sensor so 
that the sensor can detect a print area. 
  3.  Hold down the [ENTER] for 3 seconds or more. 
  4. When registration of the “print area level” is completed, 
“Adjust Complete” is displayed and an asterisk is shown on 
the right side of the voltage.  
 
 
(2) TRANS. 
 1....

3. ONLINE MODE ENGLISH VERSION EO1-33094  
3.1 Key Functions 
 
E3- 1 
3. ONLINE MODE
 
 
 
 
3.1 Key Functions 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This chapter describes the usage of the keys on the Operation 
Panel in Online mode.  
When the printer is in Online mode and connected to a host 
computer, the normal operation of printing on labels or tags can be 
accomplished.  
 
 
 
„ Key functions in the online mode 
 
Key Function 
(1)  Feeds the set media length.  
(2) Prints the data...

3. ONLINE MODE ENGLISH VERSION EO1-33094 
3.2 LCD 
E3- 2 
3.2 LCD 
 
 
 
 
 Online state 
 
 
 
 
 
 
 
Error state  
 
 
 
 
 
 
  (Example: Head open error) 
 
No. Description 
(1)  Model name and firmware version 
(2) Message 
(3)  The number of labels printed 
(4)  IP address (only when LAN/WLAN is enabled.) 
(5)  Radio intensity (only when WLAN is enabled.) 
Indicates the radio intensity in 4 levels. 
(6)  WLAN connection (only when WLAN is enabled.) 
▪ Lights up when connecting to an access point....

3. ONLINE MODE ENGLISH VERSION EO1-33094 
3.3 Operation Example 
E3- 3 
3.3 Operation Example 
„ Online Mode 
 
 
 
 
 
 
 
  
Idling or normal issuing 
  
 
 Printing is stopped. 
 
   
 
 Help guide is displayed. 
  
  
 
Help guide message for head open  
 
  
 Printing is stopped and 
Help guide is displayed.  
 
  
 
Help guide message for no paper 
 
If the print head is 
opened during idling: 
If an error occurs 
while 
printing:   When [PAUSE] key is 
pressed while printing: 
When [RESTART] key...

3. ONLINE MODE ENGLISH VERSION EO1-33094 
3.3 Operation Example 
E3- 4 
3.3  Operation Example (Cont.) 
„ Help Guide Message 
 
  
Idling or normal issuing   
 
  
 
Printing is stopped and 
Help guide is displayed.   
  
 
Cause of the error 
 
  
 
Troubleshooting 
 
  
 
How to restore to online 
 
If an error occurs 
while 
printing:  
Load media. 
When [RESTART] key is pressed, the 
printer resumes printing if there is 
remaining data. 
[RIGHT] or [ENTER]
[RIGHT] or 
[ENTER] 
[RIGHT] or 
[ENTER]...