Toshiba Bex4t2g Manual
Here you can view all the pages of manual Toshiba Bex4t2g Manual. The Toshiba manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 101
6. PRINTER SPECIFICATIONS ENGLISH VERSION EO1-33094 6. PRINTER SPECIFICATIONS E6- 1 6. PRINTER SPECIFICATIONS This section describes the printer specifications. Model Item B-EX4T2-GS12-QM- R/CN-R B-EX4T2-TS12-QM- R/CN-R B-EX4T2-HS12-QM- R/CN-R Dimension (W x D x H) 278 mm x 460 mm x 310 mm (10.9” x 18.1” x 12.2”) Weight (kg) 17 kg Operating temperature range 5 degC to 40 degC (40 degF to 104 degF) Relative humidity 25% to 85% RH (no condensation) Power supply Universal switching...
Page 102
6. PRINTER SPECIFICATIONS ENGLISH VERSION EO1-33094 6. PRINTER SPECIFICATIONS E6- 2 Model Item B-EX4T2-GS12-QM- R/CN-R B-EX4T2-TS12-QM- R/CN-R B-EX4T2-HS12- QM-R/CN-R Bar code types JAN8, JAN13, EAN8, EAN8+2 digits, EAN8+5 digits, EAN13, EAN13+2 digits, EAN13+5 digits, UPC-E, UPC-E+2 digits, UPC-E+5 digits, UPC-A, UPC-A+2 digits, UPC-A+5 digits, MSI, ITF, NW-7, CODE39, CODE93, CODE128, EAN128, Industrial 2 to 5, Customer Bar Code, POSTNET, KIX CODE, RM4SCC (ROYAL MAIL 4 STATE CUSTOMER...
Page 103
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 7.1 Media E7-１ 7. SUPPLY SPECIFICATIONS 7.1 Media Please make sure that the media being used is approved by TOSHIBA TEC. The warranty does not apply when a problem is caused by using media that is not approved by TOSHIBA TEC. For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorised service representative. 7.1.1 Media Type Two types of media can be loaded for this thermal transfer and direct thermal...
Page 104
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 7.1 Media E7-２ 7. Max. effective print width Max. 104.0 +-0.2 104.0 +-0.2 104.0 +-0.2 Min. 6.0 15.0 17.0 6.0 15.0 17.0 3.0 8.0 17.0 Label Max. 1496.0 1496.0 1492.0 1496.0 1496.0 1492.0 496.0 496.0 492.0 Min. 8.0 － 19.0 8.0 － 21.4 5.0 － 19.0 8. Effective print length Tag Max. 1498.0 － 1498.0 1498.0 － 1498.0 498.0 － 498.0 Slow-up 1.0 1.0 1.0 9. Slow-up and down area (Un-print area) Slow-down 1.0 1.0 1.0 Min. 0.13 0.13 0.13...
Page 105
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 7.1 Media E7-３ 7.1.2 Detection Area of the Transmissive Sensor Sensor position The sensor is movable in the range from the center of the paper to the left end. Transmissive sensor and Reflective sensor are moving from side to side at same time each sensor unit. Detection Area of Transmissive Sensor Transmissive sensor (○circle) Reflective sensor(□square) Sensor distance 51mm 6mm Movement range Sensor unit...
Page 106
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 7.1 Media E7-4 7.1.3 Detection Area of the Reflective Sensor The Reflective Sensor is movable from the centre to the left edge of media. The reflection factor of the Black Mark must be 10% or lower with a waveform length of 950 nm. The Reflective Sensor should be aligned with the centre of the Black Mark. The black marks, if necessary, must be printed on the labels in the gap areas. Rectangular holes can...
Page 107
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 7.1 Media E7-5 7.1.4 Effective Print Area 7.1.4.1 Relationship between Print Head Effective Print Width and Paper Width 7.1.4.2 Effective Print Area of Tags and Labels NOTES: 1. Print quality in the shaded area is not guaranteed. For the label, printing in the 1-mm width area around the label is not guaranteed as well as the shaded area shown above. 2. This...
Page 108
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 7.1 Media E7-6 7.1.5 RFID Tags Available RFID tag types are different depending on the RFID modules/printers, as follows: „ B-EX700-RFID-H1-QM-R • TAGSYS C210 • TAGSYS C220 • TAGSYS C240 • TAGSYS C320 (Only when the TAGSYS S003 module is used.) • I-Code • Tag-it • ISO15693 Cautions for using RFID Tags (1) Lift-up of Print Head An RFID tag chip or the print head may be damaged when the print head passes over the chip. (2)...
Page 109
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 7.1 Media E7-7 (7) Printing on Bump (Chip/Antenna) Area Embedding an RFID tag in labels creates bumps on the label surface, causing incomplete printing. Uneven printing or incomplete printing can occur easily, especially within 5 mm top and bottom, and to the left and right sides of the RFID-tag embedded area, as shown in the figure below. (8) Ambient Temperature As low temperatures cause wireless...
Page 110
7. SUPPLY SPECIFICATIONS ENGLISH VERSION EO1-33094 7.2 Ribbon E7-8 7.2 Ribbon The approved ribbon must be used. Use of any non-approved ribbon may cause problems. A. SHAPE AND SIZE OF RIBBON No. Item Specification 1 Ribbon Shape Spool type Ribbon Width 68(40) ±1 mm to 112 mm 2 Ribbon Winding Width 68(40) mm to 112 mm 3 Max. Ribbon Length 600 m (Ø90 mm or less) 4 Max. Ribbon OD Ø90 mm (Outside wound), Ø80 mm (Inside wound) 5 Back Treatment Coated Material Paper 6 Ribbon...