Toshiba Bex4t2g Manual

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-27 
2.6.7  Dump Mode Setting 
 
 
 
 
 
 
 
 In Dump Mode, the data in the receive buffer is printed.  The data 
is expressed in hexadecimal values.  This operation allows 
verification of the programming commands or the debug of the 
program.  
(1) BUFFER 
Select the receive buffer to dump.  
 
•  RS-232C  RS-232C receive buffer 
•  CENTRONICS  Centronics receive buffer 
•  LAN  Network I/F receive buffer 
•  BASIC1  BASIC...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-28 
2.6.7  Dump Mode Setting 
 (Cont.) 
 
 The data in the receive buffer is printed as follows.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Receive Buffer Size 
Interface B-EX4T2-GS/TS/HS 
RS-232C  1MB (65536 lines) 
Centronics  1MB (65536 lines) 
LAN  1MB (65536 lines) 
BASIC 1  8KB (512 lines) 
BASIC 2  8KB (512 lines) 
USB  1MB (65536 lines) 
RFID  8KB (512 lines) 
 
Required Media Length 
Interface B-EX4T2-GS/TS  B-EX4T2-HS 
RS-232C  198.2 m...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-29 
2.6.8 Logging 
 
 
 
 
 
 The Log menu allows the saving of print logs to USB memory. 
 
(1) LOG 
 
•  PRINTER TO USB  Saves print logs in the USB memory. 
 
  A file is automatically created in the USB memory and named in 
the following format based on the printer model and saved date. 
 /ATA0/LOG/B-EX4T1_LOG_1007291030.TXT 
  (e.g. B-EX4T Type1, 10:30, July 29, 2010)  
 
 
 
 
USER SYSTEM MODE  
Z-MODE 
AUTO CALIB 
DUMP MODE 
LOG...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-30 
2.6.9 System Mode 
 
 
 
 
 
 
 
 
 
 
 
 
How to enter the System Mode 
 
 
 
 
 
 
The System Mode consists of the following menus.  
DIAG. 
Used to check and print the printer system information and 
maintenance counter status. 
PARAMETER SET (⇒ Section 2.6.2) 
Used to set the parameters for each printer function. 
ADJUST SET (⇒ Section 2.9) 
Used to fine adjust the print position, cut position, print tone, 
etc.  
TEST PRINT (⇒...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-31 
2.6.10 Interface Setting 
 
 The Interface menu allows configuring printer interface parameters.  
The following table shows the contents of the Interface menu. 
 
Contents of the Interface Menu  
Menu Sub menu  Parameter 
NETWORK LAN/WLAN Interface 
 SNMP 
   SETTING 
   BASIC INFORMATION 
   IP ADDRESS 
   GATEWAY ADDRESS 
   SUBNET MASK 
   SOCKET PORT 
   PORT NUMBER 
   DHCP 
    DHCP CLIENT ID 
    DHCP HOST NAME 
   WLAN...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-32 
2.6.10 Interface Setting 
(Cont.) 
 
 
2.6.10.1  Network Setting 
 
(1) LAN/WLAN 
 
•  OFF  LAN and Wireless LAN are disabled.  
• ON (AUTO)
 Automatically selected. 
•  ON (LAN)  LAN is enabled. 
•  ON (WLAN)  Wireless LAN is enabled. 
 
 
(2) SNMP 
 
•  OFF  SNMP is disabled. 
• ON
  SNMP is enabled. 
 
 
(3) BASIC INFORMATION 
The following information is displayed.  
 
IP Address 
Gateway address 
Subnet mask 
Socket port...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-33 
2.6.10 Interface Setting 
(Cont.) 
 
 (8) PORT NUMBER 
  Set the port number.  
 
 
 
 
 
 
 
 
 
 
(9) DHCP 
  Select whether to enable/disable DHCP. 
 
• OFF  DHCP is disabled. 
•  ON  DHCP is enabled. 
 
 
(10) DHCP CLIENT ID 
  Select ASCII or HEX for setting DHCP Clie  nt ID. 
 
•  ASCII  DHCP client ID is entered with ASCII code. → c 
•  HEX  DHCP client ID is entered with Hex. code. → d 
 
c  When ASCII is selected: 
  Enter...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-34 
2.6.10 Interface Setting 
(Cont.)
 
 
 (13) WLAN MODE Set the connection mode and authentication in reference to the 
following table.  
 
ADHOC     OFF 
      WEP40 
      WEP104 
INFRA OPEN     OFF 
        WEP40 
        WEP104 
  SHARED     WEP40 
        WEP104 
  802.1x OPEN SYSTEM TLS WEP40 
        WEP104 
      TTLS WEP40 
        WEP104 
      LEAP WEP40 
        WEP104 
      PEAP WEP40 
        WEP104 
      MD5 WEP40...

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-35 
2.6.10 Interface Setting 
(Cont.)
 
 
 
 
 (14) DEFAULT KEY 
Select a WEP key.  
 
 
 
 
 
 (Default: 1) 
 
(15) 802.11b CHANNEL 
Select a channel for 802.11b WLAN.  
 
 
 
 
 
 (Default: 1) 
 
(16) 802.11b BAUD 
Select a baud rate for 802.11b WLAN.  
 
• 11M
 
• 5.5M 
• 2M 
• 1M 
 
 
(17) 802.11g CHANNEL 
Select a channel for 802.11g. WLAN.  
 
 
 
 
 
 (Default: 1) 
 
(18) 802.11g BAUD 
Select the baud rate for 802.11g WLAN....

2. PRINTER SETUP ENGLISH VERSION EO1-33094  
2.6 Printer Setting
 
E2-36 
2.6.10 Interface Setting 
(Cont.) 
 
 
 
 
 
 
  
(19) WINS 
 
• OFF  WINS is disabled. 
•  ON (MANUAL)  WINS is enabled. (Manual) 
•  ON (DHCP)  WINS is enabled. (DHCP) 
 
 
(20) WINS ADDRESS 
The WINS address is displayed.  
 
 
(21) LPR 
 
•  OFF  LPR is disabled.  
• ON
   LPR is enabled. 
 
 
 
 
2.6.10.2  USB 
 
(1) USB SERIAL ID 
 
• OFF
  USB serial ID is disabled.  
•  ON   USB serial ID is enabled. 
 
 
 
 
2.6.10.3...