Starplus Triad Xts Digital Key Telephone System System Programming And Operation Manual

Call Forward2-33
Chapter 2 - Features and Operation
Operation
To activate Off-Net Call Forwarding:
1. Lift handset or press ON/OFF button.
2. Press the FWD button or dial [640] on the dial pad.
3. Dial [

] on the dial pad. Dial the speed bin number (9000-9019 or 9020-9999) that 
contains the number where calls are to be forwarded. A confirmation tone sounds and 
the FWD button LED is Red Steady On.
4. Replace handset; ON/OFF button extinguishes automatically, if used instead of handset.
To remove...

2-34Call Forward
Chapter 2 - Features and Operation
Call Forward Button Flash Rate
Description
The Call Forward Button flash rate is the rate at which the Call Forward button flashes when 
any type of forward mode is used. This flash rate can be programmed to 29 different options 
identified in the flash rate table. This enables the programmer to customize the key system 
configuration to desired flash rates.
Programming Steps
1. Press the CALL FORWARD BTN flexible button (FLASH 07, Button #3). The...

Call Forward - Preset2-35
Chapter 2 - Features and Operation
Call Forward - Preset 
Description
The Call Forward Preset feature allows the system database to be configured so that 
incoming CO Lines, which are programmed to ring at a particular station, can be forwarded 
elsewhere in the system predetermined by programming. This feature is active if the station 
ringing is not answered in a specified time, and is particularly useful in overflow applications 
in which a Voice Mail or Auto Attendant may be...

2-36Call Forward - Preset
Chapter 2 - Features and Operation
Preset Call Forward - Station
Description
The Preset Call Forward feature provides separate Busy and No Answer destinations for 
internal and external calls with a No Answer Timer associated to each station. External calls 
ringing that particular station, transferred calls, and internal calls follow this Preset Forward 
feature.
Use Flash 50 programming when you want to modify a range of stations’ attributes using 
fixed station numbers.
Use...

Call Forward - Preset2-37
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #21. The display updates to reflect current programming for Page C.
Internal No Answer Destination
1. Press Button #1. The following message displays:
2. Enter a valid flexible destination number and press HOLD.
3. To delete the entry, press the [#] key...

2-38Call Forward - Preset
Chapter 2 - Features and Operation
External Busy Destination
1. Press Button #4. The following message displays:
2. Enter a valid flexible number and press HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
No Answer Timer
1. Press Button #5. The following message displays:
2. Enter a valid number (00-99) and press HOLD (00=disable).
DEFAULT … No Answer Timer is set at 10 seconds.
Conditions
» Station Forwarding overrides the Preset Forward settings.
» Only one...

Call Forward - Preset2-39
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
XXX-XXX = CO Line Range
5. Press the PRESET FWD DESTINATION flexible button (Button #5). The following message 
displays:
6. Enter a valid forward destination on the dial pad.
[9020-9999] = System Speed Bins
[100-351] = Station Extensions...

2-40Call Forward - Preset
Chapter 2 - Features and Operation
Preset Forward Timer (Incoming Call to a Destination)
Description
The Preset Forward Timer determines the time an outside line rings before being forwarded 
to a predetermined destination as programmed in FLASH 50, Page C, Buttons 1-4. If a forward 
destination is programmed in the CO line field, the CO calls forward to that destination after 
the CO preset forward timer expires. This forward occurs regardless of how many stations the 
line is...

Calling Forward Override2-41
Chapter 2 - Features and Operation
Calling Forward Override
Description
The Call Forward Override feature allows a user to reach a station that is call forwarded. This 
allows the calling station to override the forwarding which allows the user to use Off Hook 
Voice Over (OHVO), Executive Override, Monitor, Message Wait Indication, Camp On, or Call 
Back Request at that station rather than forwarding to another destination.
Operation
1. Dial [5#] followed by the desired...

2-42Call Park
Chapter 2 - Features and Operation
Call Park
Call Park - System
Description
An outside line can be placed into one of eight system park locations and can be retrieved by 
any station that has a direct line appearance or an available Loop button. Parked calls have 
their own recall timer that recalls the originating station, and if still unanswered, the 
Attendant(s). An outside line may also be placed into a station park location. The station user 
then dials a code followed by their...