Starplus Triad Xts Digital Key Telephone System System Programming And Operation Manual

Call Coverage2-23
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Auto Callback DSS/BLF flash rate is set for a Red 120 ipm Flash (10).
Message Callback - DSS / BLF Flash Rate
Description
The Message Call Back DSS/BLF flash rate is the rate at which a DSS button of a station 
returning your message flashes. This flash rate can be programmed to 29 different options 
identified in the flash rate table. This enables the...

2-24Call Coverage
Chapter 2 - Features and Operation
Operation
To assign a Call Coverage Button:
1. Press [SPEED] + [SPEED].
2. Press a desired flexible button.
3. Dial [647] for Non-Ringing or [646] for Ringing, followed by the station number to cover. A 
confirmation tone sounds.
Once the button is assigned on the station and a call rings in:
1. The coverage station receives audible and/or visual indications for the coverage station 
after a programmable period of time. The ring tone is the internal...

Call Coverage2-25
Chapter 2 - Features and Operation
Conditions
» Direct CO calls have ring and LCD priority over call coverage calls. The call coverage 
station must have a direct CO appearance or Loop button to pick up an external call. If the 
call coverage station is in DND, no audible ringing occurs, however visual and LCD 
information is presented.
» This feature can be programmed on any key station or DSS Console with an available 
flexible button. If the DSS with a call coverage button assigned...

2-26Call Forward
Chapter 2 - Features and Operation
Call Forward
Description
When any type of station call forwarding is invoked, the LCD display normally indicates the 
call forwarding mode at all times. This feature has modified the LCD forwarding display to 
make the call forwarding mode display optional. This feature is enabled/disabled in admin 
programming on a system-wide basis. The call forward status is stored in a battery protected 
area of memory.
Call Forwarding
Description
Stations can be...

Call Forward2-27
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the CALL FORWARD flexible button (Button #10). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT …Call Forwarding is enabled...

2-28Call Forward
Chapter 2 - Features and Operation
» If the last number of the Station Call Forward chain is in DND mode, the internal caller 
gets a DND response.
» If a private line rings into a station with Manual Call Forward the CO Line forwards, 
providing the forwarded station has a direct CO Line appearance or an available Loop 
button.
Call Forward - All Calls
Description
The Call Forward All Calls feature allows a station the ability to have all their calls (internal or 
external) forwarded...

Call Forward2-29
Chapter 2 - Features and Operation
Call Forward - Busy
Description
The Call Forward Busy feature allows a station the ability to have their calls forwarded to a 
designated station, an ACD or UCD group pilot number, Voice Mail group number, or Hunt 
group when their station is busy or in DND.
Operation
To activate Busy Call Forwarding:
1. Lift the handset or press ON/OFF button.
2. Press the FWD button or dial [640] on the dial pad.
3. Dial the Call Forward Busy code [8] on the dial...

2-30Call Forward
Chapter 2 - Features and Operation
3. Dial the Call Forward Busy/No Answer code [9] on the dial pad.
4. Dial the desired destination number where calls are to be forwarded. A confirmation tone 
sounds.
5. Replace handset; ON/OFF button extinguishes automatically, if used instead of handset.
To remove Busy / No Answer Call Forwarding:
1. Lift handset or press ON/OFF button.
2. Press the FWD button or dial either [640] or [662]. A confirmation tone sounds and the 
FWD LED extinguishes.
3....

Call Forward2-31
Chapter 2 - Features and Operation
5. Dial the three- or four-digit destination number where calls are to be forwarded. (Station, 
Voice Mail, ACD/UCD, or Hunt Group.) A confirmation tone sounds.
6. Replace handset; ON/OFF button extinguishes automatically, if used instead of handset.
To remove Follow Me Call Forwarding:
1. Lift the handset or press ON/OFF button.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial the station number of the station that forwarding is to be...

2-32Call Forward
Chapter 2 - Features and Operation
Call Forward - No Answer
Description
The Call Forward No Answer feature allows a station the ability to have their calls forwarded 
to a designated station, an ACD or UCD group pilot number, Voice Mail group number or 
Hunt group number when there is no answer at the station. No answer calls forward when 
the system-wide no answer timer expires.
Operation
To activate No Answer Call Forwarding:
1. Lift the handset or press ON/OFF button.
2. Press the FWD...