Siemens Saturn Iie Epabx Installation Test Procedures Manual

i  .I
SATURN 
IIE EPABXA30808-X5130-B120-l-6928Installation Test Procedures
Issue 1, May 1986
Table 6.10 Siemens Digital Telephone Displayable Characters
ORDERCHARACTER
ORDERCHARACTER
1.! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !33.AAAAAAAAAAAAAAAA
2.#P It It I, I, ,I 0 0 I, r, 0 I, 0 I, ,I I,34,BBBBBBBBBBBBBBBB3.#H#H#####,Y######35.cccccccccccccccc4.$ssssss$s$s$s$s$36.DDDDDDDDDDDDDDDD5.o/b 010 vo %%%% vo vo o/o %% o/o %% o/o
37.EEEEEEEEEEEEEEEE...

SATURN IIE EPABX‘nstallation Test Procedures
Table 6.11 Outgoing Trunk TestA30808-X5130-8120-l-8928Issue 1, May 1986
STEP
1
5
6
7
8A
8BPROCEDURE
VERlFiCATlCN
?lace maintenance test phoneoff-hook.
Dial the 
Diagnos?ic Test Access Code.Dial 2 to enable trunk test.
Dial the two-digit trunk group number
(00 through 31) 
coniaining the trunk
circuit to be tested.
Dial the two-digit trunk number (00 
-99) of the trunk circuit to be tested.
For CO-type trunks (i.e., TMBM PCB),
dial the test tone number provided...

-SATURN 
IIE EPABXA30i308-X5130-B120-1-B928Installation Test ProceduresIssue 1, May 1986.Table 6.12 Placing Circuit(s) In-Service
STEPPROCEDUREVERIF!CATIONIF VERlFlCATIOflIS NOT OBTAiNED*
1Place maintenance test phone Dial tone is returned.
off-hook.
2Dial the Diagnostic Test Access Code.Recall dial tone is returned.
3Dial 7 for placing a circuit in-service.None.
4AIf a single circuit is to be placed in-Coniirmation tone is returned.If reorder tone is returned, the seleci-service, dial the four digit PEN...

I  ’SATURN IIE EPABX
installation Test ProceduresTable 6.13 
Takinq Circuit(s) Out-of-Service IContinucdl
A30808-X5130-8120-1-8928
Issue 1, May 1986. ,
STEPPROCEDUREVERIFICATIONIF VERIFICATION
IS NOT OBTAINED
5AIf additional tests or procedures areRecall dial tone is returned.
to be performed, hook-flash the main-
tenance test phone and dial the next
code (Diagnostic Test Access Code is
not redialed).
5BIf no additional tests or procedures areNone.to be performed place the main-
tenance test phone...

I.--SATURN 
IIE EPABXA30808-X5130-B120-143928Installation Test ProceduresIssue 1, May 1986
SECTKIN 7.00 INSTALLATION TEST PROCEDURES CHECKLlST
7.01General. After performing the installation test proce-
dures contained in this practice, each installation test proce-
dure performed should be recorded to ensure that all testshave been completed satisfactorily. Use Table 7.00, Installa-iion Test. Procedures Checklist, for this purpose. This table
can be used as a sign-off sheet, if required.
Table 7.00...