Siemens Saturn Iie Epabx Installation Test Procedures Manual

SATURN IIE EPABXA30808-X5130-B120-1-6928Installation Test ProceduresIssue 1, May 1986
CENTRAL
OFFICE
co QP C3DTrunk
Circuit
; TRUNK ;CUSTOMER PREMISESI FAClLlTY :
I
iLocal Telephone CompanyIIInterfacing Connecting Bloc!cSystem 
MDF Cable J32. J34, J35, J38, J40. J42or J44 from the Basic shelf or J26, J28. J30, J32,J34. J36, J38. or J40 from the LTU shelf
LSystem T&R Connecting Dock
NO!% Dashed lines represcnl ins!allalion-dependenr cross-CCnnEcfionsFigure 
G.06 63 and DID Trunk Cross-Connections
DISTANT...

I-SATURN 
IIE EPABX
Installation Test ProceduresA30808-X5130.B120-l-8928Issue 1, May 1986
DISTANTI 
-l-RUN!< I
OFFICE; FACILITY 1OR SIGNALING ;
EQUIPMENTI
I
I
I
ICUSTOMER PREMISES
Interfacing 
Connecilng Block
System T&R 
Connecting Bloc!cSystem MDF Cable J32. J34. 
J36, J38. J40, J42or J44 from the Basic shelf or J26. J28, J30, J32,J34, J36, J38, or J40 from the LTU shelf
Y
L System MDF Cable J33, J35, J37, J39, J41, J43,or J45 from the Basic sheif; or J27. J29, J31, J33,J35. J37, J39 or J41 from the...

I--SATURN 
IIE EPABXA3080i3-X5130-B120-1-69.28Installation Test ProceduresIssue 1, May 1986
DISTANT
OFFICEOR SIGNALING
EQUIPMENT
IFour-Wire
IType II 
E&MTrunk
or
Signaling
Circuit
-
R-
I!Rl
E-
SC-
M-
SE-TRUNK 
;FACiLlTY fCUSTOMER PfiErvwzs
In:er:ach~g Conneclmg Block
System T&R 
Connecilng Block
r------I
634.J3S. J30. J40. J42 or J44‘J28.J~O.J32,~34.J3S.J33.
35,J37, J39. J41. JS3. or J457.J29, J31. J33,,‘35, J37, J29System E&M Connecting Block
E!o!e: Dashed lines represent ins:al!ation-dependent...

SATURN IIE EPABX
Installation Test ProceduresA30808-X5130-B120-l-8928Issue 1, May 198GConnecting Block
System T&R Connecting Block
No:es: Dashed lines represent installation-dependent cross-connectrons
Ei-drrecticnal connection to code calling device for both calling and an-swerback channels shown.
Maximum of one code calling equipment (with or without 
answerbaclc capa-bility) can be interfaced with the system.
When maintenance procedures are to be performed on code 
callrng equip-
ment, associated...

SATURN IIE EPABXA30808-X5130-B120-l-8928Installation Test Procedures
Issue 1, May 1988
InterfacingConnectmg BlockSystem T&R Connecttng 61ocl(I
(Op!lonal)System MDF Cable J32. J34. J36. .Jm. J40. J42 or J44 r
hA----from the Basic shelf or J26. J28, J33, J32, J34, J3G. J38. j
or J40 from the LTU shelf
I
Figure 6.14 
Music-cn-Wc!d Cross-Connections Using TMBA4 PC0System E&M Connecting Block
LSystem MDF Cable J33: J35, J37, J33. J41, J43. or J45
from the @asic shelf; or J27, J29, J31, J33, J35, J37, J39or...

A30808-X5130-0120-1-8928issue 1, May 1986
System E&M Connecting Block
System MDF Cable J3.2, J34. J36, J36. J40, J42or J44 from the Basic shelf or J26, J26, J30.J32, J34, J36. J36, or JSO from the LTU shelf
__----
-------
-----mm--------
-------Trunk Circuit
System E&M Connecting 
Block\LSystem MDF Cable J33. J35. J37, J39, J41, J43,or J45 from the Basic shelf; or J27, J29, J31,
J33, J35, J37, J39 or J41 from the LTU shelf
A5!59-,-4,9:66Figure 6.16 Paging With Answerback Cross-Connections
TypicalPaging...

SATURN IIE EPABXA30808-X5130-6120-1-8928
Installation Test ProceduresIssue 1, May 1986
System 
T+R Connecting BlockI
Interfacing
\
Connecting BlockSystem MDF Cable J32, J34, J36, J38,J40, J42 or J44 from the Basic shelf or
(Optional)
J26, J28. J30, J32, J34, J36, J38 or J40i
UNA Signaling Devicefrom the LTU shelf-----a-------
With an
------
SLMAISLAlG PC13
Notes: Dashed lines represent installation-dependent cross-connections.
System MDF Cable connections are shown for an SLMA 
PCS. For SLA16...

SATURN IIE EPAEXInstallation Test ProceduresI
-
6.04System Diagnostic Tests. After the necessary MDF
cross-connections have been completed, the on-line diagnos-
tic 
icsts and procedures are performed to verify the opera-tronal capability of the system. Note that the subsequent
on-line diagnostic tests and procedures are presented in the
sequence in which they should be performed under normal
insiallation conditions. It is the responsibility of craft pers,on-nel to determine the sequence in which such...

SATURN IIE E?ABXA30808-X5130-8120-l-8928Installation Test Proceduresissue 1, May 1986
TEP
1Place maintenance test phone
off-hook.Dial tone returned.
2Dial the Diagncstic Test Access Code.Recall dial tone returned.
3
4ADial 1 for tone generator test.None.
Dial 00 if all tones are to be tested andverify that all tones returned are 
un-dis!orted.
All tones are returned in the sequenceshown in Table 6.01 for two seconds
each: test repeats until the main-
tenance test phone is placed on-hook
or hook flashed....

I
SATURN IIE EPABXA30808-X5130-B120-l-8928Installation Test ProceduresIssue 1, May 1986
STEPPROCECUREVEFHFICATION
1
5
6A
68Table 6.02 
DTMF Receiver Test
Place maintenance test phone
off-hook.
Dial the Diagnostic Test Access Code.Dial 
# for DTMF receiver test.
Dial the four-digit PEN number of the
DTMF receiver circuit to be tested.
Depress the maintenance test phone
keypad’s buttons in the following se-
quence.Test tone 
(1004Hz at -16dBm)
returned.
a) For 12-button phones: 1, 2, 3,
4, 5, 6, 7, 8, 9,...