Home > Sharp > Fax Machine > Sharp Ux 460 Plain Paper Fax With Tad Operation Manual

Sharp Ux 460 Plain Paper Fax With Tad Operation Manual

Here you can view all the pages of manual Sharp Ux 460 Plain Paper Fax With Tad Operation Manual. The Sharp manuals for Fax Machine are available online for free. You can easily download all the documents as PDF.

Page 121

¨If Option Setting 15 (Auto Print Out) is set to YES, a report will
be automatically printed out whenever information on 30
operations has accumulated. (A report can still be printed on
demand at any time.)
¨All information is erased after a report is printed out. If automatic
print-out is turned off and print-out has not been done manually
for 30 operations, the information on the oldest operation will be
overwritten each time a new operation is performed.
Explanation of headings
SENDER/
RECEIVERThe fax...

Page 122

COM.E-0 to COM.E-7 - A telephone line error prevented the
transaction. See Line Error in Chapter 11.
CANCEL - Transmission was cancelled because the STOP key was
pressed, no document was in the feeder, or the other machine
requested transmission using a function which your fax does not
have. If you were attempting to fax, make sure a document is in the
feeder. If you were receiving, contact the faxing party to see how they
are trying to send to you.
Timer List
This list shows the timer operations that...

Page 123

Passcode List
This list shows settings made for polling security, your name and
fax/telephone number as entered in the machine, and a sample of the
header printed at the top of every page you transmit (HEADER
PRINT).
Option Setting List
This list shows the current status of the option settings.
9. Printing  Lists
Printing Reports and Lists
121 

Page 124

Anti Junk Number List
This list shows the numbers that are blocked by the Anti Junk function.
Caller ID List
This list shows information about your most recent calls (maximum of
20 calls). (This list is only available if you are using the Caller ID
function.)
Printing Reports and Lists
122 

Page 125

TAD Program List
This list shows the settings and codes programmed for the answering
machine.
Message List
This list shows information about the messages currently recorded in
the answering machine, including the date and time of recording, the
length, and the type (ICM, memo, or 2-way).
9. Printing  Lists
Printing Reports and Lists
123 

Page 126

Print Setup List
This list shows the current status of the printing settings accessed by
pressing the FUNCTION key and the 6 key.
Transaction Report
This report is printed out automatically after an operation is completed
to allow you to check the result. Your fax is set at the factory to print
out the report only when an error occurs. If desired, you can change
the setting to have it printed out under a variety of other conditions.
This is done by changing Option Setting 7 (Transaction Report Print...

Page 127

Chapter10Maintenance
Fax print head
Clean the printing head frequently to assure optimum printing
performance.
1Unplug the power cord.
2Pull the paper release plate forward and remove the paper.
3Open the operation panel (grasp the finger hold and pull up), and
then pull the release on the right side of the machine forward to open
the print compartment cover.
10. Mainenance
125 

Page 128

4Take the imaging film cartridge out of the print compartment and
place it on a sheet of paper.
5Wipe the print head and roller with denatured alcohol.
Print head Roller
Caution!
· ·Do not use benzene or thinner. Avoid touching the print head with hard
objects.
· ·The print head may be hot if your fax machine has just received a large
number of documents. If this is the case, allow the print head to cool prior to
cleaning.
Maintenance
126 

Page 129

6Place the imaging film cartridge back in the print compartment.
7Close the print compartment cover (press down on both sides to
make sure it clicks into place), and then close the operation panel.
8Reinsert the paper in the paper tray and push the paper release plate
back down.
10. Mainenance
Maintenance
127 

Page 130

Scanning glass and rollers
Clean the scanning glass and rollers frequently to ensure the quality of
transmitted images and copies. Open the operation panel (grasp the
finger hold and pull up), and wipe the scanning glass and rollers with a
soft cloth.
¨Make sure that all dirt and stains (such as correcting fluid) are
removed, as dirts and stains will cause vertical lines on
transmitted images and copies.
¨Adhesive cellophane tape is useful for removal of debris from the
rollers.
Document
rollers
Scanning...
Start reading Sharp Ux 460 Plain Paper Fax With Tad Operation Manual

Related Manuals for Sharp Ux 460 Plain Paper Fax With Tad Operation Manual

All Sharp manuals