Home > Sharp > Printer > Sharp Mxm264n User Guide

Sharp Mxm264n User Guide

Here you can view all the pages of manual Sharp Mxm264n User Guide. The Sharp manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 691

7-59
SYSTEM SETTINGS
Contents
Card area settings
The data check during card reading can be set.
Settings
Card type/Reader settings
The authentication of Felica, HID and other IC cards can be set.
Settings
Card Setting
(when the HID card reader is available.)
Configure this setting if user authentication will be performed using an HID card.
Card Reader Device Registration
In this setting, the product ID and vender ID of the connected HID card reader are displayed. To store the HID card 
reader, touch the...

Page 692

7-60
SYSTEM SETTINGS
Contents
Energy Save
The Energy Save settings help reduce power costs. From an environmental perspective, these settings also help reduce 
pollution and conserve natural resources. Touch the [Energy Save] key to configure the settings.
Toner Save Mode
You can reduce the amount of toner used for printing.
Auto Power Shut-Off
This setting enables or disables Auto Power Shut-Off. 
Remove the checkmark if you prefer that Auto Power 
Shut-Off does not operate.
When the set duration of...

Page 693

7-61
SYSTEM SETTINGS
Contents
Preheat Mode Setting
The time until Preheat Mode activates can be set to any 
number of minutes from 1 to 240.
Preheat Mode will activate when the set duration of time 
elapses after printing ends and no further operations are 
performed. This function reduces your power costs, and 
at the same time helps conserve natural resources and 
reduce pollution.
Select the time that best suits the needs of your workplace.
Preheat mode cannot be disabled. 

Page 694

7-62
SYSTEM SETTINGS
Contents
Operation Settings
Settings related to machine operation can be configured. Touch the [Operation Settings] key to configure the settings.
Other Settings
Keys Touch Sound
This setting is used to adjust (or turn off) the volume of the 
beep that sounds when you touch a key. You can also have 
three beeps sound at initial values when setting the ratio in 
copy mode or when adjusting the exposure in any mode.
Auto Clear Setting
The time until Auto Clear activates can be set to...

Page 695

7-63
SYSTEM SETTINGS
Contents
Disabling of Clock Adjustment
This setting is used to prohibit changing of the date and 
time.
Disabling of Covers/Inserts Mode
(When the automatic document feeder is installed.)
This setting is used to prohibit the use of the covers and 
inserts function.
Set Keyboard Priority
When an external keyboard is connected, you can select 
whether the soft keyboard or the external keyboard is 
used.
Initial Original Count Setting
This specifies whether or not Original Count in the...

Page 696

7-64
SYSTEM SETTINGS
Contents
MFP Display Pattern Setting
One of six colour patterns can be selected for the colour pattern in the touch panel.
A sample of the selected pattern can be viewed.
Customize Key Setting
Short-cuts to functions that are frequently used can be displayed in the base screen of each mode.
For information on customize keys, see the chapters for each function.
The settings are shown below.
Home Screen Settings
Use this to configure the home screen that appears when the [HOME] key is...

Page 697

7-65
SYSTEM SETTINGS
Contents My Menu Settings
Use this to configure the My Menu screen that appears when the [My Menu] key is pressed.
The settings are shown below.
* Does not appear when user authentication is not enabled.
ItemDescription
Display TitleShow a title on the My Menu.
TitleEnter a maximum of 70 characters for the title name.
Display User Name*Show the currently logged-in user name on the My Menu.
Display DateShow the date and time on the My Menu.
Background ImageSelect the image that...

Page 698

7-66
SYSTEM SETTINGS
Contents
Preview Setting
(When the hard disk drive is installed.)
Configure settings for the preview screen that can be 
used for fax / image send and document filing.
Default Preview
Set the selection state of the [Preview] key in each of the 
screens below.
Copy
Image Send
Scan Send
 Internet Fax Send
 Fax Send
 Data Entry
 USB Memory Scan
 Address Book
Document Filing
 Scan to HDD
Default Preview Display
Set the display zoom ratio of the preview screen for 
copy, fax /...

Page 699

7-67
SYSTEM SETTINGS
Contents
Device Control
These settings control devices installed on the machine. Touch the [Device Control] key to configure the settings.
Other Settings
Original Feeding Mode
The following original feeding modes can be set to 
operate by default in copy, Scan to HDD, and image 
send modes. When a mode is frequently used, this 
saves you from having to select the mode in the special 
modes each time you need to use it.
 Mixed Size Original (Same Width (Copy mode 
only)/Different...

Page 700

7-68
SYSTEM SETTINGS
Contents
Original Size Detector Setting
One of the 8 groups of standard original sizes shown below can be selected for detection by the original size detection 
function.
* When the automatic document feeder is installed.
Cancel Detection at Document Glass
Original size detection on the document glass can be disabled. When this is done, all originals placed on the document 
glass are treated as special size originals.
Selections
Detectable original sizes
Document glassDocument feeder...
Start reading Sharp Mxm264n User Guide

Related Manuals for Sharp Mxm264n User Guide

All Sharp manuals