Sharp Mxm264n User Guide

7-29
SYSTEM SETTINGS
Contents Login by user number
Touch the [Admin Login] key.
Enter the administrator password in the administrator password 
entry screen.
This completes the administrator login procedure. The system 
settings (administrator) can be used.
 In addition to login by touching the [Admin Login] key, the system settings (administrator) can also be accessed when login 
is performed by selecting a user with administrator rights from the user list or by entering a user number with...

7-30
SYSTEM SETTINGS
Contents
System Settings (Administrator) List
The system settings that appear following administrator login are shown below. The default setting for each item is also shown.
User Control
*1 This cannot be set on the machine. Set this in User Control in the Web pages.
*2 When the HID card reader is available.
 Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
 For information on the general settings, see System...

7-31
SYSTEM SETTINGS
Contents
Energy save
* This function is not available in some countries and regions.
Operation Settings
ItemFactory default settingPage
PEnergy Save7-60
NToner Save Mode
7-60XPrintDisabled
XCopy*Disabled
NAuto Power Shut-OffEnabled7-60
NTransitioning to Auto Power Shut-Off Immediately After Completion 
of Remote JobDisabled7-60
NAuto Power Shut-Off TimerFix transition time.7-60
NChange transition time by time of dayDisabled7-60
NPreheat Mode Setting1 min.7-61
ItemFactory default...

7-32
SYSTEM SETTINGS
Contents
XScan
7-64
‹Customize 1Address Review
‹Customize 2File
‹Customize 3Quick File
XInternet Fax*2
‹(Same as Scan)
XFax*3
‹(Same as Scan)
XUSB Memory Scan
‹Customize 1–
‹Customize 2–
‹Customize 3–
XData Entry*4
‹(Same as Scan)
NHome Screen Settings*1–7-64
XMy Menu Settings*1–7-65
NPreview Setting*5
7-66
XDefault PreviewAll disabled
XDefault Preview Display
‹CopyFull Page
‹Image SendScan Send: Full Page
Internet Fax Send: Full Page
Fax Send: Full Page
Data Entry: Full Page
USB...

7-33
SYSTEM SETTINGS
Contents
*1 This cannot be set on the machine. Set this in the system settings in the Web pages.
*2 When the Internet fax expansion kit is installed.
*3 When the facsimile expansion kit is installed.
*4 When the application integration module is installed.
*5 When the hard disk expansion kit is installed.
Device Control
XOperation from Specified PC
7-66
‹Operational AuthorityProhibited
‹Hostname or IP Address of PC–
‹View Password Entry ScreenDisplay in Both PC and MFP
XOperation by...

7-34
SYSTEM SETTINGS
Contents
*1 When the hard disk drive is installed.
*2 When the automatic document feeder is installed.
*3 When a paper drawer is installed.
*4 When a finisher is installed.
Copy Function Settings
XDisabling of Stapler*4Disabled7-69
NFusing Control Settings60 - 89g/m2 (16 - 23 lbs.)7-69
NPlasmacluster Settings7-69
XPlasmacluster Operation at Powering On of MachineON, Airflow: Low7-69
XPlasmacluster Operation at Powering Off of MachineON, Turn off Immediately7-69
XStatus Indicator...

7-35
SYSTEM SETTINGS
Contents
* When the automatic document feeder is installed.
Network Settings
XDisabling of Bypass-Tray in Duplex CopyDisabled7-72
XDisabling of Auto Paper SelectionDisabled7-72
XAuto Selection Setting of Tray that is Supplied the PaperDisabled7-72
X600dpi x 600dpi Scanning Mode for Document Feeder*Disabled7-72
XQuick Scan from Document GlassEnabled7-72
XAuto Clear Before Copy Job ExecutionDisabled7-72
ItemFactory default settingPage
PNetwork Settings7-73
NIPv4 SettingsDHCP7-73
NIPv6...

7-36
SYSTEM SETTINGS
Contents
Printer Settings
* When the hard disk drive is installed.
Image Send Settings
ItemFactory default settingPage
PPrinter Settings7-74
NDefault Settings7-74
XProhibit Notice Page PrintingEnabled7-74
XProhibit Test Page PrintingDisabled7-74
XA4/Letter Size Auto ChangeVaries depending on country and region7-74
XPrint Density Level37-74
XBypass Tray Settings7-74
‹Enable Detected Paper Size in Bypass TrayDisabled7-74
‹Enable Selected Paper Type in Bypass TrayEnabled7-74
‹Exclude...

7-37
SYSTEM SETTINGS
Contents
‹Image OrientationPortrait
7-76
‹Initial Resolution Setting
ScanApply the Resolution Set when 
Stored: Disabled
200 X 200 dpi
 Internet Fax*1Apply the Resolution Set when 
Stored: Disabled
200 X 100 dpi
Fax*2Apply the Resolution Set when 
Stored: Disabled
Standard
‹Default Exposure SettingsAuto
7-76 Original Image TypeText
 Moiré ReductionDisabled
‹Must Input Next Address Key at Broadcast SettingDisabled7-77
‹Scan Complete Sound SettingMiddle7-77
‹The Number of File...

7-38
SYSTEM SETTINGS
Contents
XOwn Name and Destination Set
7-79
‹Sender Data Registration
 Sender Name–
 Sender Fax Number–
 I-Fax Own Address–
‹Registration of Own Name Select–7-79
NScan Settings7-80
XOther Settings7-80
‹Default Sender Set–7-80
‹Default Colour Mode Settings
7-80 Black & WhiteMono 2
 Colour ModeAuto, Greyscale
 Disable Change of B/W Setting in Auto ModeDisabled
‹Initial File Format Setting
7-80
 File TypePDF
 Black & WhiteMMR (G4)
 Colour/GreyscaleMedium
 Specified Pages per...