Sharp Mxm264n User Guide

5-83
SCANNER/INTERNET FAX
Contents
SCANNING BOTH SIDES OF A CARD ONTO 
A SINGLE PAGE (Card Shot)
This function lets you send the front and reverse sides of a card as a single page, without the need to send each side 
separately.
 When using card shot, the original must be placed on the document glass.
 When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Place the original face down on the 
document glass.
2
Specify the destination....

5-84
SCANNER/INTERNET FAX
Contents
4
Specify the original size.
(1) Enter the original size.
 Touch the X (width) numeric value display key and 
enter the width.
 Touch the Y (height) numeric value display key and 
enter the height.
(A) To return the original size to the default size, touch the 
[Size Reset] key.
(B) To automatically enlarge or reduce the image to fit the 
send size, touch the [Fit to Send Size] key. If you wish 
to scan the original at the entered original size, there 
is no need to...

5-85
SCANNER/INTERNET FAX
Contents
7
Touch the [Read-End] key.
If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, 
resolution, scan size, and send size.
The ratio cannot be specified and Rotation Sending Setting cannot be selected.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 4.
Read-EndConfigure
Place next original.       (Pg.No.x)
Press [Start].
When finished, press [Read-End]. 

5-86
SCANNER/INTERNET FAX
Contents
SCANNING MANY ORIGINALS AT ONCE 
(Job Build)
This function requires the automatic document feeder to be installed.
This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic 
document feeder, and transmit the pages in a single transmission. Use this function when the number of originals that 
you wish to scan exceeds the maximum number of sheets that can be inserted in the automatic document feeder at 
once....

5-87
SCANNER/INTERNET FAX
Contents
4
Select job build mode.
(1) Touch the [Job Build] key so that it is 
highlighted.
(2) Touch the [OK] key.
5
Press the [START] key to scan the first set of originals.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
6
Insert the next set of originals and press the [START] key.
Repeat until all originals have been scanned.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared.
7
Touch the...

5-88
SCANNER/INTERNET FAX
Contents
SCANNING ORIGINALS OF DIFFERENT 
SIZES (Mixed Size Original)
This function requires the automatic document feeder to be installed.
This feature lets you scan originals of different sizes at the same time; for example, B4 (8-1/2 x 14) size originals 
mixed together with A3 (11
 x 17) size originals. When scanning the originals, the machine automatically detects the 
size of each original.
For a mixed size document with different widths, this feature can only be used with...

5-89
SCANNER/INTERNET FAX
Contents
4
Select the mixed size original setting.
(1) Touch the [Mixed Size Original] key so that 
it is highlighted.
(2) Touch the [OK] key.
If an original scan size has been specified, a message will appear when the [Mixed Size Original] key is touched. To 
enable the Mixed Size Original setting, change the scan size setting to auto and then touch the [Mixed Size Original] 
key again.
5
Press the [START] key.
Scanning begins. A beep will sound to indicate that scanning is...

5-90
SCANNER/INTERNET FAX
Contents
SCANNING THIN ORIGINALS 
(Slow Scan Mode)
This function requires the automatic document feeder to be installed.
Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent 
thin originals from misfeeding.
When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.
1
Insert the originals face up in the 
document feeder tray.
Adjust the original guides slowly....

5-91
SCANNER/INTERNET FAX
Contents
4
Select slow scan mode.
(1) Touch the [Slow Scan Mode] key so that it is 
highlighted.
(2) Touch the [OK] key.
5
Press the [START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
 When this function is selected, automatic 2-sided scanning is not possible.
 Rotate cannot be used when Mixed Size Original is enabled.
To cancel slow scan mode...
Touch the [Slow Scan...

5-92
SCANNER/INTERNET FAX
Contents
CHECKING THE NUMBER OF SCANNED 
ORIGINAL SHEETS BEFORE TRANSMISSION 
(Original Count)
The number of scanned original sheets can be counted and displayed before transmission. Checking the number of 
scanned original sheets before transmission helps prevent transmission mistakes.
 This function cannot be used in USB memory mode.
 The setting can be enabled separately for each mode.
1
Insert the originals face up in the 
document feeder tray.
Insert the originals all the...