Sharp Mxm264n User Guide

5-113
SCANNER/INTERNET FAX
Contents
MANUALLY RECEIVING INTERNET FAXES
If the interval for checking for received faxes is somewhat long and you wish to check immediately, you can manually 
initiate reception.
Touch the [I-Fax Manual Reception] key to connect to the mail server and retrieve received faxes.
If POP3 server settings are not configured in the Web pages, the [I-Fax Manual Reception] key is greyed out to prevent 
selection.
System Settings: Fax Data Receive/Forward (page 7-22)
This setting is...

5-114
SCANNER/INTERNET FAX
Contents
PRINTING A PASSWORD-PROTECTED FAX 
(Hold Setting For Received Data Print)
Hold Setting for Received Data Print in the system settings (administrator) can be enabled to have faxes received to 
memory without being printed. To print the faxes, a password must be entered. When this function is enabled, a 
password entry screen appears in the touch panel when received Internet faxes are retrieved.
When the previously programmed 4-digit password is entered with the numeric...

5-115
SCANNER/INTERNET FAX
Contents
CHECKING THE IMAGE BEFORE PRINTING
This function requires the hard disk drive.
When Received Data Image Check Setting is enabled* in the system settings (administrator), you can check a 
received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a 
received image.
* The factory default setting is disabled.
Depending on the size of the received data, part of the image in the image check screen on the touch...

5-116
SCANNER/INTERNET FAX
Contents
CHECKING THE IMAGE BEFORE 
FORWARDING
This function requires the hard disk drive.
When Received Data Image Check Setting is enabled in the system settings (administrator), you can select the 
received data from the list and forward it to the addresses recorded in the address book. When this function is enabled, 
follow the steps below to forward the received image.
* The factory default setting is disabled.
Depending on the size of the received data, part of the image...

5-117
SCANNER/INTERNET FAX
Contents
IMAGE CHECK SCREEN
This function requires the hard disk drive.
This section explains the image check screen.
(1) Information display
This shows information on the displayed image.
(2) Preview image
An image of the selected received image appears.
If the image is cut off, use the scroll bars at the right and 
bottom of the screen to scroll the image. Touch a bar and slide 
it to scroll. (You can also touch the   keys to scroll.)
(3) Change page keys
When there are...

5-118
SCANNER/INTERNET FAX
Contents
FORWARDING RECEIVED INTERNET 
FAXES TO AN ADDRESS  
(Inbound Routing Settings)
This function requires the hard disk drive. 
Received Internet faxes can be automatically forwarded to a facsimile internet fax, e-mail address, file server address, 
desktop address, or network folder address. When this function is enabled, you can also have received Internet faxes 
forwarded without printing them.
CONFIGURING INBOUND ROUTING SETTINGS
All inbound routing settings are...

5-119
SCANNER/INTERNET FAX
Contents
2
Storing sender addresses.
If you wish to have only faxes from specified addresses 
forwarded, store the desired sender addresses. Send 
addresses stored here can be selected from a list when you 
store a forwarding table.
(1) Click [Sender Number/Address 
Registration] in the [Inbound Routing 
Settings] menu in the Web page.
(2) Enter the sender address in Internet Fax 
Address or Fax Number as appropriate, 
and click the [Add to List] button.
The entered address...

5-120
SCANNER/INTERNET FAX
Contents
3
Store a forwarding table.
Follow the steps below to store a forwarding table that 
combines a specified sender and forwarding address.
(1) Click [Inbound Routing Settings] in the Web 
page menu and click the [Add] button.
(2) Enter a Table Name.
(3) Select the line used for reception.
(4) Select the sender whose faxes will be 
forwarded.
 To forward all received faxes, select [Forward All 
Received Data].
 To forward only data received from specific senders,
select...

5-121
SCANNER/INTERNET FAX
Contents
4
Specifying forwarding tables to be used.
To use the inbound routing function, enable the forwarding 
tables that you wish to use from among the stored tables.
(1) Click [Inbound Routing Settings] in the Web 
page menu.
(2) Select [Always Forward] or [Forward on 
Selected Day & Time] from the forwarding 
table.
The forwarding permission settings that appear here are 
linked to the forwarding conditions set in step 3. If you 
wish to use different forwarding conditions...

5-122
SCANNER/INTERNET FAX
Contents
This function requires the hard disk drive.
BASIC SCANNING PROCEDURE
You can install the scanner driver on your computer from the CD-ROM that accompanies the machine, and use a 
TWAIN* compliant application to scan an image using your computer.
Scanning from your computer is most useful for scanning a single original such as a photo, particularly when you want to 
adjust scan settings as you scan. By contrast, scanning at the machine is most useful for continuous...