Sharp Mx2310u User Guide

2-82
COPIER
Contents
4
Select card shot settings.
(1) Enter the original size.
With the [X] key highlighted, enter the X (horizontal) 
dimension of the original with the   keys.
Touch the [Y] key and enter the Y (vertical) dimension of 
the original with the   keys.
You can also directly touch a numeric value display key to 
change a number with the numeric keys.
(A) To enlarge or reduce the images to fit the paper 
based on the entered original size, touch the [Fit to 
Page] key.
(B) The [Size Reset]...

2-83
COPIER
Contents
 The original must be placed on the document glass.
 Copying is only possible on standard size paper.
 XY Zoom cannot be used when using this function.
 The image cannot be rotated when using this function.
To cancel card shot...
Touch the [Cancel] key in the screen of step 4.
System Settings (Administrator): Card Shot Settings
This is used to set the values to which the size returns when the [Size Reset] key is pressed. 25 mm to 210 mm (1 to 8-1/2) 
can be entered for both the...

2-84
COPIER
Contents
PRINTING THE DATE AND A STAMP ON 
COPIES (Stamp)
Use this function to print the date, a stamp, the page number, and text on copies. In addition, specific text can be added 
to a copy as a watermark. (Watermark)*
Six printing positions are available: top left, top centre, top right, bottom left, bottom centre, and bottom right.
The printing positions are separated into areas that are used for the date, page number and text (A below), and areas 
that are used for a stamp (B below). The...

2-85
COPIER
Contents
GENERAL PROCEDURE FOR USING STAMP
To select stamp settings, follow the steps below.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Stamp] key.
☞Special modes menu (2nd screen) (page 2-42)
3
Select the print position.
Select from 6 positions: top left, top centre, top right, bottom 
left,...

2-86
COPIER
Contents
4
Select Stamp.
For detailed information on each of the stamp items, see the 
following sections:
Date:ADDING THE DATE TO COPIES (Date) 
(page 2-88)
Stamp: STAMPING COPIES (Stamp) (page 2-90)
Page numbering:PRINTING PAGE NUMBERS ON COPIES 
(Page Numbering) (page 2-92)
Text: PRINTING TEXT ON COPIES (Text) (page 
2-96)
Watermark:ADDING A WATERMARK TO A COPY 
(Watermark) (page 2-102)
5
When you have finished selecting stamp 
settings, touch the   key.
6
Select settings for the original...

2-87
COPIER
Contents
7
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 
touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first 
original.
 If you selected...

2-88
COPIER
Contents
ADDING THE DATE TO COPIES (Date)
The date can be printed on copies. The position of the date, colour, format, and page (first page only or all pages) can 
be selected.
Example: Printing APRIL 4, 2010 in the top right corner of the paper.
1
Touch the [Date] key in the stamp selection screen.
See steps 1 to 4 of GENERAL PROCEDURE FOR USING STAMP (page 2-85).
2
Set the date format.
(1) Touch the key that shows the desired date 
format.
(2) If you selected [YYYY/MM/DD], 
[MM/DD/YYYY], or...

2-89
COPIER
Contents
4
Check the displayed date. If you need to 
change the date, touch the [Date 
Change] key.
Set the date that you wish to use and touch the [OK] key.
As an alternative to touching the   keys, you can also 
directly touch the numeric value display key and change the 
value with the numeric keys.
 If you select a date that does not exist (such as Feb. 30), the [OK] key will be greyed out to prevent entry.
 Changing the date here will not change the date that is set in the machine...

2-90
COPIER
Contents
STAMPING COPIES (Stamp)
Text such as CONFIDENTIAL can be printed in white on a dark background as a stamp on copies.
The position, colour, size, density, and pages (first page only or all pages) can be selected for a stamp.
Printing CONFIDENTIAL in the top left corner of a copy
The following 12 selections are available for the stamp text.
Three levels can be selected for the density of the stamp background.
Seven colours can be selected for the stamp colour.
Two stamp sizes can be...

2-91
COPIER
Contents
3
Touch the [Print Colour] key and set the 
colour and density.
Touch the colour that you wish to use.
If you wish to darken the selected colour, touch the   key. 
If you wish to lighten the selected colour, touch the   key.
When you have finished selecting the settings, touch the [OK] 
key.
 If you selected a colour other than [Bk (Black)], press the [COLOUR START] key. Pressing the [BLACK & WHITE 
START] key will print the stamp in black and white.
 If the stamp is printed in...