Sharp Mx2310u User Guide

2-112
COPIER
Contents
4
Place A3W (12 x 18) paper in the 
bypass tray.
Pull out the extension tray, adjust the guides to the width of 
A3W (12 x 18) paper, and place the paper in the bypass tray. 
After loading the paper, configure the bypass tray settings as 
explained in MAKING COPIES USING THE BYPASS TRAY 
(page 2-38).
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages...

2-113
COPIER
Contents
COPYING IN THE CENTRE OF THE PAPER (Centring)
This is used to centre the copied image on the paper.
This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the 
image is reduced.
Not using the centring functionUsing the centring function
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch...

2-114
COPIER
Contents
 The image can be reduced when using the centring function, but not enlarged.
 When the original size or the paper size is displayed as a special size, this function cannot be used.
To cancel centring...
Touch the [Centring] key in the screen of step 3 so that it is not highlighted. 

2-115
COPIER
Contents
REVERSING WHITE AND BLACK IN A COPY (B/W Reverse)
This is used to reverse black and white in a copy to create a negative image. This function can only be used for black 
and white copying.
Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce 
toner consumption.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the...

2-116
COPIER
Contents
 When this function is selected, the Original Image Type setting for exposure adjustment automatically changes to Text.
 This function is not available in some countries and regions.
To cancel B/W reverse...
Touch the [B/W Reverse] key in the screen of step 3 so that it is not highlighted. 

2-117
COPIER
Contents
[Colour Adjustments] KEY
When the [Colour Adjustments] key is touched in the 2nd special modes menu screen, the colour adjustments menu 
screen opens.
Colour adjustments menu screen
(1) [RGB Adjust] key
☞ADJUSTING RED/GREEN/BLUE IN COPIES (RGB 
Adjust) (page 2-118)
(2) [Sharpness] key
☞ADJUSTING THE SHARPNESS OF AN IMAGE 
(Sharpness) (page 2-119)
(3) [Suppress background] key
☞WHITENING FAINT COLOURS IN COPIES 
(Suppress Background) (page 2-120)(4) [Colour Balance] key
☞ADJUSTING...

2-118
COPIER
Contents
ADJUSTING RED/GREEN/BLUE IN COPIES (RGB Adjust)
This feature is used to strengthen or weaken any one of the three colour components R (red), G (green), or B (blue).
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Colour Adjustments] key.
(4) Touch the [RGB Adjust] key.
☞[Colour Adjustments]...

2-119
COPIER
Contents
ADJUSTING THE SHARPNESS OF AN IMAGE (Sharpness)
This is used to sharpen an image or make it softer.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Colour Adjustments] key.
(4) Touch the [Sharpness] key.
☞[Colour Adjustments] KEY (page 2-117)
3
Adjust the image.
(1) Touch the [Soft] key or...

2-120
COPIER
Contents
WHITENING FAINT COLOURS IN COPIES (Suppress 
Background)
This feature is used to suppress light background areas.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Colour Adjustments] key.
(4) Touch the [Suppress Background] key.
☞[Colour Adjustments] KEY (page 2-117)
3
Select the suppress...

2-121
COPIER
Contents
4
Press the [COLOUR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [COLOUR START] key. Repeat until all pages have been scanned 
and then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key ( ).
To cancel a suppress background setting...
Touch the [Cancel] key in the screen of step 3.