Sharp Mx2310u User Guide

2-132
COPIER
Contents
1
Insert the originals face up in the 
document feeder tray.
●When Same Width is used
Place the originals with the sides that are the same length 
aligned on the left.
●When Different Width is used
Place the originals with the corners aligned in the far left corner 
of the document feeder tray.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Mixed Size Original] key.
☞Special modes menu (2nd screen)...

2-133
COPIER
Contents
4
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
To cancel scanning and copying...
Press the [STOP] key ( ).
 When [Different Width] is selected, automatic two-sided copying cannot be used.
 When [Different Width] is selected, the staple function cannot be used.
 The mixed size original function cannot be used to copy originals that are the same size but are placed in different 
orientations (A4 and A4R (8-1/2 x 11 and 8-1/2 x 11R), etc.).
To...

2-134
COPIER
Contents
COPYING THIN ORIGINALS (Slow Scan 
Mode)
This function requires the automatic document feeder.
Use this function when you wish to scan thin originals using the automatic document feeder. This function helps prevent 
thin originals from misfeeding.
1
Insert the originals face up in the 
document feeder tray.
Insert the originals all the way into the document feeder tray. 
Multiple originals can be placed in the document feeder tray. 
The stack of originals must not be higher than the...

2-135
COPIER
Contents
The 2-Sided to 2-Sided and 2-Sided to 1-Sided modes of automatic 2-sided copying cannot be used. 
To cancel the slow scan mode setting...
Touch the [Slow Scan Mode] key in the screen of step 2 so that it is not highlighted.
System Settings (Administrator): Original Feeding Mode
This is used to have scanning always take place in slow scan mode. 

2-136
COPIER
Contents
This section explains convenient copy functions such as interrupting a copy run, changing the order of reserved copy 
jobs, and storing copy settings in a program.
INTERRUPTING A COPY RUN 
(Interrupt copy)
When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy. 
Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job first.
CONVENIENT COPY FUNCTIONS
1
Touch the [Interrupt] key.
The...

2-137
COPIER
Contents
 If user authentication is enabled, the login screen will appear when the [Interrupt] key is pressed. Enter your user name 
and password to log in. The number of copies made will be added to the count of the user that logged in.
 Depending on the settings of the job in progress, the [Interrupt] key may not appear.
 Depending on the settings of the job in progress, the [Reserve] key may appear instead of the [Interrupt] key. Unlike 
interrupt copy, reserve copy does not...

2-138
COPIER
Contents
CHECKING A PREVIEW IMAGE OF A COPY 
(Preview)
This function requires the hard disk drive.
You can touch the [Preview] key so that it is highlighted in the base screen and then scan the original to check a preview 
image of the copy in the touch panel before printing the copy.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Touch the [Preview] key so that it is 
highlighted.
3
Select copy settings and press the...

2-139
COPIER
Contents
To cancel the operation...
Press the [CLEAR ALL] key ( ).
System Settings (Administrator): Default Preview
You can set the default state of the [Preview] key to always selected (highlighted). Enable this setting if you wish to check a 
preview image each time you make a copy. 

2-140
COPIER
Contents
PREVIEW SCREEN
The preview screen is explained below.
(1) Preview image
An image of the selected received image appears.
If the image is cut off, use the scroll bars at the right and 
bottom of the screen to scroll the image. Touch a bar and 
slide it to scroll. (You can also touch the   keys to 
scroll.)
(2) Change page keys
When there are multiple pages of images, use these keys 
to change pages.
  keys:  Go to the first or the last page.
  keys:  Go to the previous page or the...

2-141
COPIER
Contents
JOB STATUS SCREEN
The job status screen is displayed when the [JOB STATUS] key on the operation panel is pressed. The job status 
screen shows the status of jobs by mode. When the [JOB STATUS] key is pressed, the job status screen of the mode 
that was being used before the key was pressed appears.
Example: Pressing the key in copy mode
The job status display (A) is in the lower left corner of the touch panel. The job status display can be touched to display the 
job status screen....