Sharp Mx2310u User Guide

2-42
COPIER
Contents Special modes menu (2nd screen)
(1) [Stamp] key
☞PRINTING THE DATE AND A STAMP ON COPIES 
(Stamp) (page 2-84)
(2) [Image Edit] key
☞[Image Edit] KEY (page 2-104)
(3) [Colour Adjustments] key
☞[Colour Adjustments] KEY (page 2-117)
(4) [File] key
This saves a job in a folder of the document filing 
function. 
The hard disk drive is required.
(5) [Quick File] key
This saves a job in the Quick File folder of the document 
filing function. 
The hard disk drive is required.(6) [Proof Copy]...

2-43
COPIER
Contents [OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as 
follows:
(A) Enter the selected special mode settings and return to the base screen of copy mode.
(B) Enter the selected special mode settings and return to the special modes menu screen. Touch this key when you 
wish to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the...

2-44
COPIER
Contents
ADDING MARGINS (Margin Shift)
This function is used to shift the copy image right, left or down to adjust the margin.
This is convenient when you wish to bind the copies with a string or in a binder.
Shifting the image to the right so the copies can be bound at the left edge with a string
Margin shift positions
11
Not using margin shiftUsing margin shift
The punch holes cut off 
part of the imageThe image is moved to 
allow space for the string 
holes so the image is not 
cut off....

2-45
COPIER
Contents
4
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 
touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first 
original.)
To cancel...

2-46
COPIER
Contents
ERASING PERIPHERAL SHADOWS (Erase)
The erase function is used to erase shadows around the edges of copies that occur when copying thick originals or 
books.
When a thick book is copied
Erase modes
Shadows appear here
Not using the erase 
functionUsing the erase 
function
Shadows appear on the 
copy.Shadows do not appear on 
the copy.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch...

2-47
COPIER
Contents
3
Select the erase settings.
(1) Touch the desired erase mode.
Select one of the four positions.
Touch the [Side Erase] key to open the following screen.
Touch the checkbox of the edge that you wish to erase 
and make sure that a checkmark appears.
When performing 1-sided to 2-sided copying or 2-sided to 
2-sided copying, set the erase edge on the reverse side.
 If you touch the [Same Side as Side 1] key, the edge in 
the same position as on the front side will be erased.
 If you...

2-48
COPIER
Contents
COPYING EACH FACING PAGE OF A 
BOUND DOCUMENT (Dual Page Copy)
The dual page copy function produces separate copies of two document pages that are placed side by side on the 
document glass. This function is useful when making copies of the facing pages of a book or other bound document.
Copying the facing pages of a book or bound document
1
Place the original on the document glass.
Align the centre of the original with the appropriate size mark  .
2
Select A4 (8-1/2 x 11) size...

2-49
COPIER
Contents
3
Select Dual Page Copy.
(1) Touch the [Special Modes] key.
☞SPECIAL MODES (page 2-41)
(2) Touch the [Dual Page Copy] key so that it is 
highlighted.
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
4
Press the [COLOUR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and 
then touch the [Read-End] key. (For the second original...

2-50
COPIER
Contents
MAKING COPIES IN PAMPHLET FORMAT 
(Pamphlet Copy)
This function copies 2 original pages onto the front side and 2 original pages onto the reverse side of each sheet of 
paper so that the copies can be folded at the centreline to form a pamphlet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
Pamphlet copy using 8 original pages
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
If...

2-51
COPIER
Contents
3
Select pamphlet copy settings.
(1) If the original is 1-sided, touch the [1-Sided] 
key. If the original is 2-sided, touch the 
[2-Sided] key.
When the document cover is mounted, the [2-Sided] key 
is not displayed.
(2) Select the binding edge ([Left Binding] or 
[Right Binding]).
(3) To insert a cover, touch the [Cover Setting] 
key.
If you do not want to add a cover, go to step 5.
When the document cover is mounted, it is not possible to 
touch the [Cover Setting] key.
4
Select...