Sharp Mx2310u User Guide

2-32
COPIER
Contents Retrieving a stored original size
To retrieve a stored original size, touch the [Original] key in the base screen of copy mode and perform the steps below.
1
Touch the [Custom Size] key.
2
Retrieve the desired stored original size.
(1) Touch the [Recall] tab.
(2) Touch the key of the original size that you 
wish to retrieve.
(3) Touch the [OK] key.
To cancel the operation...
Press the [CLEAR ALL] key ( ).
A5
A5R
B5
216x340
A4R
216x343
A4A3
B5RB4
Custom Size
OriginalOK
Size Input...

2-33
COPIER
Contents
OUTPUT
To select output functions and the output tray, touch the [Output] key in the base screen of copy mode. Output functions 
that can be selected are sort, group, offset, staple sort, and punch. All explanations of the settings below assume that a 
finisher and punch module are installed.
(1) [Offset Tray] key ([Centre Tray] key*)
Output is delivered to the offset tray. The [Offset Tray] 
key is automatically selected when the [Staple Sort] key 
is selected.
* When a finisher is...

2-34
COPIER
Contents
The above screen shows the keys that appear when a finisher and punch module are installed. The keys that appear will vary 
depending on what peripheral devices are installed.
In addition, it may not be possible to select some keys depending what peripheral devices are installed. If your screen is 
different from the screen of previous page, see the screens that follow.
Example
The screen when a finisher is not installed.
Right TrayOffset
Tray
Sort
Group
Offset
OutputOK 

2-35
COPIER
Contents
OUTPUT MODES
This section explains the output modes.
Sort mode
This is used to sort (collate) output into sets.
Example: Sorting the output into 5 sets
Group mode
This function groups copies by page.
Example: Groups of 5 copies of each page
Offset function
This function offsets each set of copies from the previous set in the output tray, making it easy to separate sets of copies.
The sort function is automatically selected when 
originals are placed in the automatic document...

2-36
COPIER
Contents Staple sort function
The staple sort function sorts output into sets, staples each set, and delivers the sets to the tray.
The relations between the stapling positions, paper orientation, permitted paper sizes for stapling, and number of sheets 
that can be stapled are shown below.
For original placement orientations, see Original placement orientation (for the staple sort and punch functions) (page 
2-37).
* You can insert 2 sheets of maximum 256g/m2 as cover sheets and staple them....

2-37
COPIER
Contents Punch function
If an optional punch module is installed, holes can be punched in output.
Paper size that can be punched is B5R to A3 (7-1/4 x  10-1/2R to 11 x 17). However, A3W (12 x 18) sized paper 
and special media such as transparency film and tab paper cannot be used.
Original placement orientation (for the staple sort and punch functions)
When using the staple sort function or the punch function, the original must be placed as shown below to enable stapling 
or punching in the...

2-38
COPIER
Contents
MAKING COPIES USING THE BYPASS TRAY
In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and 
other special media.
For detailed information on paper that can be loaded in the bypass tray, see IMPORTANT POINTS ABOUT PAPER 
(page 1-27) in 1. BEFORE USING THE MACHINE. For precautions when loading paper in the bypass tray, see 
LOADING PAPER IN THE BYPASS TRAY (page 1-32) in 1. BEFORE USING THE MACHINE.
1
Place the original....

2-39
COPIER
Contents
4
Check the paper type setting for the 
bypass tray. If you need to change the 
setting, touch the paper type key.
If you do not need to change the paper size and type that 
appear under Bypass Tray, go to step 7.
5
Select the type of paper used in the 
bypass tray.
Select the paper type that you will use.
6
Set the paper size.
(1) Select the paper size.
[Auto-Inch] key
When the paper placed in the bypass tray is an inch size 
(8-1/2 x 11, etc.), the paper size will be detected...

2-40
COPIER
Contents
Enter the paper size of the bypass tray
When the [Custom Size] key is touched, the paper size entry screen appears.
Touch the X (width) numeric value display key to open a 
number entry screen. Enter the width of the paper with 
the numeric keys, and touch the [OK] key in the number 
entry screen.
Touch the Y (height) numeric value display key to open a 
number entry screen. Enter the height of the paper with 
the numeric keys, and touch the [OK] key in the number 
entry screen.
7...

2-41
COPIER
Contents
This chapter explains Margin Shift, Erase, Dual Page Copy, and other special modes.
SPECIAL MODES
When the [Special Modes] key is pressed in the base screen, the special modes menu screen appears. The special 
modes menu consists of two screens. Touch the 
 keys to move between the screens. After selecting special 
mode settings, touch the [OK] key in the special modes menu screen to complete the settings and return to the base 
screen of copy mode.
Special modes menu (1st screen)...