Sharp MX M850 User Manual

39
5Change the settings.
(1) Touch the [Change] key.
If there are no problems in the proof copy, go to step 7.
(2) Touch the appropriate keys to change the 
settings.
(3) Touch the [OK] key.
6Press the [PROOF COPY] key.
One set of copies will be printed using the settings you 
changed in step 5. If you need to make further changes to 
the settings, repeat steps 5 and 6.
7Press the [START] key.
The number of sets of copies set in step 3 minus one set will 
be printed.
2-Sided Copy
Output
Paper Select...

40
FINISHING
You can touch the [Output] key to select output functions such as the sort function, group function, and offset 
function, and to select the output tray. All settings that can be selected when the finisher, punch unit, saddle unit, 
and folding unit are installed are explained.
(1) [Top Tray] key
Output is delivered to the top tray. When the top tray 
is selected, the offset, staple sort, and saddle stitch 
functions cannot be used.
(2) [Offset Tray] key
Output is delivered to the offset...

41
INTERRUPTING A COPY RUN
(Interrupt Copy)
When the machine is printing, you can temporarily interrupt the job and 
perform a copy job that you wish to prioritize.
This feature is useful when you need to make an urgent copy during a 
long copy run.
1Touch the [Interrupt] key while the machine is 
printing.
The [Interrupt] key appears in the base screen while the 
machine is printing.
2Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
3Set the...

42
STORING COPY OPERATIONS (Job Programs)
You can store a group of copy settings. The settings can be retrieved and used whenever needed.
When you frequently use the same group of settings, this saves you the trouble of manually selecting the settings 
each time you need to use them.
Storing a job program
Using a job program
1Press the [#/P] key ( ).
2Select settings in the touch panel.
(1) Touch the [Store/Delete] tab.
(2) Touch the key in which you want to store a job 
program.
Touch any key that is...

43
Deleting a job program
2Touch the key of the desired job program.
After selecting the job program, set the number of copies 
and press the [START] key to begin copying.
1Press the [#/P] key ( ).
2Select settings in the touch panel.
(1) Touch the [Store/Delete] tab.
(2) Touch the key of the job program that you 
wish to delete.
Touch a key that is highlighted.
Keys that have a job program stored are highlighted.
(3) Read the displayed message and touch the 
[Delete] key.
(4) Touch the [Exit] key.
123...

44
SPECIAL MODES
The special modes can be used for a variety of special-purpose copy jobs.
This section introduces the types of copies that can be made with the special modes. (The procedures for using 
each special mode are not explained.)
Each special mode has its own settings and steps, however, the basic procedure is the same for all modes. The 
basic procedure for selecting a special mode is explained on the next page using Margin Shift as an example.
For the procedures for using the special modes,...

45
SELECTING A SPECIAL MODE
The procedure for selecting settings for Adding margins (Margin Shift) is explained below as an example. 
Although the specific settings for each special mode vary, the general procedure is the same.
1Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Special Modes] key.
(2) Touch the [Margin Shift] key.
Shifting the left margin by 15 mm will be explained as 
an...

46
CONVENIENT COPY FUNCTIONS
Adding margins (Margin Shift)
Erasing peripheral shadows (Erase)
Copying each facing page of a bound document 
(Dual Page Copy)
Making copies in pamphlet format (Pamphlet Copy)
Use this function to shift the image on 
the copy to create binding margins.
This function is convenient when you 
will be binding the copies with a string 
or placing them in a binder.
Use this function to erase peripheral 
shadows that occur when making 
copies of books and other thick 
originals....

47
Copying a large number of originals at once (Job Build)
Using two machines to make a large number of 
copies (Tandem Copy)
Using a different paper type for covers (Covers/Inserts)
Adding inserts when copying on transparency film
(Transparency Inserts)
A stack of originals higher than the 
indicator line on the automatic 
document feeder cannot be fed through 
the feeder.
The job build function lets you divide 
the stack of originals into sets, feed 
each set, and copy the sets as a single 
job.
You...

48
Copying multiple pages onto one sheet of paper 
(Multi Shot)
Copying a pamphlet (Book Copy)
Copying captions onto tab paper (Tab Copy)
Copying both sides of a card onto one sheet of 
paper (Card Shot)
Use this function to copy two or four 
original pages onto one sheet of paper.
Use this function to copy a book, 
pamphlet, or other bound original. The 
copies will be arranged in the same 
pamphlet-style layout.
When a saddle unit or a saddle stitch 
finisher is installed, the output is 
automatically...