Sharp MX M850 User Manual

29
MAKING COPIES
This is the most basic procedure for making copies.
1Touch the [COPY] key.
The base screen of copy mode appears.
2Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
3Set the number of copies and then press the 
[START] key.
1-sided original1-sided copy
Special Modes
Plain
Plain
Plain2-Sided Copy
Output
File
Quick FileCopy Ratio100%
A33.
A35.
A36.
A37.1.2.A4A4
OriginalPaper SelectAuto
A4
PlainAuto
ExposureAutoB44.
A4
IMAGE...

30
2-SIDED COPYING 
(Automatic Document Feeder)
You can use the automatic document feeder to make automatic 
2-sided copies without the bother of manually turning the originals over 
and re-inserting them.
This section explains how to copy 1-sided originals onto both sides of 
the paper.
1Place the originals.
2Select settings in the touch panel.
(1) Touch the [2-Sided Copy] key.
(2) Touch the [1-Sided to 2-Sided] key.
(3) Touch the [OK] key.
3Set the number of copies and then press the 
[START] key....

31
COPYING ON SPECIAL PAPER 
(Bypass Copy)
Use the bypass tray to copy on special media such as heavy paper, 
envelopes, and tab paper.
This section explains how to load A4 recycled paper in the bypass tray.
1Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
2Insert paper in the bypass tray.
After loading paper, press the tray button and make sure 
that the paper rises.
For details, see Bypass tray (MX-MFX2) (page 20).
3Select settings in the...

32
Selecting a tray
Select settings in the touch panel. (Continued)
(4) Touch the [Auto-AB] key.
(5) Touch the [OK] key.
(6) Touch the bypass tray key.
(7) Touch the [OK] key.
4Set the number of copies and then press the 
[START] key.
To select paper, touch the [Paper Select] key or the image of the 
machine in the base screen of copy mode.
Touch a key to select a tray.
(A) Touch to select one of trays 1 to 4.
(B) Touch to select the bypass tray.
(C) Touch to set the type of paper in the bypass tray.
(D)...

33
SELECTING THE EXPOSURE AND IMAGE 
TYPE
You can specify the original image type to obtain a clearer copy.
The example of copying an original with light colours such as pencil 
writing is explained below.
1Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Exposure] key.
(2) Touch the [Light Original] key.
(3) Darken the printed result with the   key.
Nine levels are available for the...

34
FITTING THE COPY IMAGE TO THE 
PAPER (Automatic Ratio Selection)
You can copy an original onto any size of paper using automatic 
enlargement/reduction.
This section explains how to copy an A4 original onto A3 paper.
1Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Paper Select] key.
(2) Touch the tray that has the desired paper size.
(3) Touch the [OK] key.
(4) Touch the [Auto Image]...

35
3Set the number of copies.
4Press the [START] key.
Correct sets
Cancel copyingCancel scanning
Downloaded From ManualsPrinter.com Manuals 

36
ENLARGEMENT/REDUCTION 
(Preset Ratios / Zoom)
For precise adjustment of the copy size, you can select a preset ratio 
and/or adjust the ratio in increments of 1%.
As an example, this section explains how to reduce the image to 55%.
1Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
2Select settings in the touch panel.
(1) Touch the [Copy Ratio] key.
(2) Touch the   key.
(3) Touch the [50%] key.
Touch the preset ratio key that is closest to...

37
3Set the number of copies.
4Press the [START] key.
Correct sets
Cancel copyingCancel scanning
Downloaded From ManualsPrinter.com Manuals 

38
CHECKING COPIES BEFORE PRINTING
(Proof Copy)
Regardless of the number of copies specified, this function initially 
prints only the first set. After you have checked the first set, the 
remaining sets are printed.
1Place the originals.
When using the document glass, place the original with the 
side to be scanned face down.
2Select copy settings.
3Set the number of copies.
4Press the [PROOF COPY] key.
One set of copies is printed.
5 sets
1 set4 sets Check
The side to be scanned
must be face up!...