Sharp Mx M453n Owners Manual

7-74
SYSTEM SETTINGS
Contents
Interface Settings
These settings are used to control and monitor data transmitted to the USB port or network port of the machine.
Hexadecimal Dump Mode
This function is used to print the print data from a 
computer in hexadecimal format together with the 
corresponding ASCII text. This allows you to check 
whether or not print data from the computer is being 
transmitted to the machine correctly.
Example of a hexadecimal dump
I/O Timeout
The I/O timeout can be set to any...

7-75
SYSTEM SETTINGS
Contents
Image Send Settings
Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings] 
key to configure the settings.
Operation Settings
The operation settings below apply to all image send functions.
Default Display Settings
You can select one of 5 base screen types for the base screen 
that appears when the [IMAGE SEND] key is touched or when 
the [CLEAR ALL] ( ) key is pressed in image send mode.
 Address Book
 Scan...

7-76
SYSTEM SETTINGS
Contents
Must Input Next Address Key at 
Broadcast Setting
This setting is used to require that the [Next Address] 
key be touched before the next address is entered when 
performing a broadcast transmission.
When this setting is enabled, the [Next Address] key 
cannot be omitted even if the next address is entered 
with a one-touch key.
If a user attempts to enter the next address without 
touching the [Next Address] key, a double-beep alarm 
will sound and the entry will be...

7-77
SYSTEM SETTINGS
Contents
Disable Registration of Program
This prohibits the use of the address book when a 
program is stored.
Configure the setting for each of the following items:

 FTP

 Network Folder
 Internet Fax (Including Direct SMTP)

Select All: Select all items.
Clear Checked: Clear all selections.
Disable Registration of Memory 
Box
Disable all types of memory box registration.
Configure the setting for each of the following items:
Polling Memory, Confidential, Relay Broadcast (Direct...

7-78
SYSTEM SETTINGS
Contents
Use this setting to enter the Internet fax address, fax 
number of the machine and the name of the user.
Sender Data Registration
Use this to store the sender name for fax and Internet 
fax, the sender number for fax, and the sender address 
for Internet fax.
The stored sender name and fax sender number or 
Internet sender address will be printed at the top of the 
received fax.
Sender Name
Enter the sender name. A maximum of 20 characters 
can be entered for the sender...

7-79
SYSTEM SETTINGS
Contents
Scan Settings
Settings related to scanning can be configured.
Default Sender Set
The information stored here is used if you do not specify 
[Reply-To] in the send settings when performing Scan to 
E-mail.
Sender Name
Enter a default sender name (maximum of 20 
characters).
Reply E-mail Address
Enter a default reply address (maximum of 64 
characters).
Default Colour Mode Settings
Select a default colour mode setting in scan mode. The 
settings are shown below.
 Full Colour...

7-80
SYSTEM SETTINGS
Contents
Maximum Size of E-mail 
Attachments (E-mail)
To prevent the transmission of excessively large image 
files by Scan to E-mail, a file size limit can be set from 
1 MB to 10 MB in increments of 1 MB. If the total size of 
the image files created by scanning the original exceeds 
the limit, the image files are discarded.
If you do not wish to set a limit, select [Unlimited].
Maximum Size of Data Attachments 
(FTP/Desktop/Network Folder)
A limit can be set for the size of files...

7-81
SYSTEM SETTINGS
Contents
I-Fax Settings
These settings are used to configure the default settings 
for Internet fax.
Auto Wake Up Print
When the [POWER] key ( ) is off (but the main 
power switch is on) and an Internet fax is received, this 
function activates the machine and prints the fax.
When this function is disabled, received Internet faxes 
are not printed until the [POWER] key ( ) is switched 
on.
Compression Setting
This is used to set the default compression mode for 
Internet fax...

7-82
SYSTEM SETTINGS
Contents
Activity Report Print Select Setting
This is used to have the Image Sending Activity Report 
stored in the machines memory automatically print at 
specified times.
The Image Sending Activity Report can be set to 
automatically print each time the number of transactions 
reaches 201, and it can also be set to automatically print 
at a specified time (once a day only). (The settings can 
be simultaneously enabled.)
Body Text Print Select Setting
Image files attached to...

7-83
SYSTEM SETTINGS
Contents
Rotation Sending Setting
When transmitting an image that is one of the following 
sizes, this function rotates the image counterclockwise 
90 degrees. (The setting can be configured separately 
for each size.)
A4, B5R, A5R, 8-1/2 x 11, 5-1/2 x 8-1/2R, 16K
Printing Page Number at Receiver
When the transmitted image is printed by the receiving 
machine, the page number can be added to the top of 
each printed page.
Recall in Case of Line Busy
(This setting is only effective...