Sharp MX M260 User Manual

							139
8
Chapter 8
PERIPHERAL DEVICES AND SUPPLIES
Optional equipments and supplies are explained in this chapter. To purchase optional equipment and supplies 
contact your authorised service representative.
PERIPHERAL DEVICES
*1Requires installation of the NETWORK SCANNER EXPANSION KIT (MX-NSX1).
*2Requires installation of the PRINTER EXPANSION KIT (MX-PB12).
*3Requires installation of the PRINTER EXPANSION KIT (MX-PB12), and 128MB or more of memory must be extended.
FINISHER (MX-FN13) See page 140.
500-SHEET PAPER FEED UNIT (MX-DE10) See page 141.
2 x 500-SHEET PAPER FEED UNIT (MX-DE11) See page 141.
HIGH STAND (MX-DS11)
LOW STAND (MX-DS12)
DOCUMENT COVER (MX-VR10)
REVERSING SINGLE PASS FEEDER (MX-RP10)
RIGHT TRAY (MX-TE10)
When a finisher (MX-FN13) is installed, an output tray can be added on the right side.
JOB SEPARATOR TRAY KIT (MX-TR11)
This enables separation of output locations by mode (copy, printer, etc.).
PRINTER EXPANSION KIT (MX-PB12)
This allows the machine to be used as a network printer.
APPLICATION INTEGRATION MODULE KIT (MX-AMX1)*
1
The application integration module can be used in combination with the network scanner function to attach 
metadata to a scanned image file before it is transmitted.
MACRO FONT FLASH ROM KIT (AR-PF2)
Fonts and forms can be downloaded and stored.
PS3 EXPANSION KIT  (MX-PK10)*
2
This kit offers PostScript 3 compatibility.
BARCODE FONT KIT (AR-PF1)*
2
This font set adds barcode printing capability.
NETWORK SCANNER EXPANSION KIT (MX-NSX1)*
3
This allows the machine to be used as a network scanner.
FACSIMILE EXPANSION KIT (AR-FX7)
This allows the machine can be used as a facsimile machine.
8MB FAX MEMORY (AR-MM9)
Image memory can be expanded by installing the optional fax expansion memory.
256MB EXPANSION MEMORY BOARD (AR-SM5)
512MB EXPANSION MEMORY BOARD (AR-SM6)
Additional memory can be installed in the machine. There are two DIMM slots in this machine, and the memory 
can be expanded to a maximum of 1056 MB.
 A commercial 64/128/256/512MB (the 168 pin SDRAM DIMM) memory module can be used to expand 
memory in this unit. For more information, consult your authorised service representative.
 Some options may not be available in some countries and regions.
 Some options cannot be installed on certain models.
 The peripheral devices are generally optional, however, some models include certain peripheral devices as 
standard equipment.Note
Downloaded From ManualsPrinter.com Manuals 
						

							140
PERIPHERAL DEVICES AND SUPPLIES
FINISHER (MX-FN13)
The finisher is equipped with the offset function, which offsets each set of output from the previous set.
In addition, each set of sorted output can be stapled.
Part names
The following parts can be accessed when the finisher is open.
(1) Offset tray
Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for large output 
( A3, A4R, B4, 11 x 17, 8-1/2 x 14, 8-1/2 x 13, 
8-1/2 x 11R, 7-1/4 x 10-1/2R sizes).
(2) Lever
Use this to move the finisher in order to remove a 
paper misfeed, replace staples, or remove a staple 
jam.(3) Front cover
Open this cover to remove a paper misfeed, replace 
staples or remove a staple jam.
(4) Staple case
This holds the staple cartridge. Pull the case out to 
replace the staple cartridge or remove a staple jam.
(5) Staple case release lever
Use this to remove the staple case.
Specifications
(1)
(5) (4) (2)
(3)
MX-FN13
Tray capacity500 sheets (250 sheets for sizes larger than A4R (8-1/2 x 11R))
Paper sizeSize A6R to A3 (5-1/2 x 8-1/2 to 11 x 17)
Weight 56 g/m2 to 200 g/m2 (15 lbs. to 54 lbs.)
Offset1-3/16 (30 mm) (Offset Tray)
Paper sizes that can be 
stapledA3, B4, A4, A4R, B5, B5R (11 x 17, 8-1/2 x 14, 8-1/2 x 13, 8-1/2 x 11, 
8-1/2 x 11R)
Stapling capacityA4, A4R, B5, B5R, 8-1/2 x 11, 8-1/2 x 11R:
50 sheets (80 g/m2 (21 lbs.))
A3, B4, 11 x 17, 8-1/2 x 14, 8-1/2 x 13:
30 sheets (80 g/m
2 (21 lbs.))
Power supplyDrawn from the machine
WeightApprox. 14.4 kg (31.8 lbs.)
Dimensions472 mm (W) x 461 mm (D) x 199 mm (H) (18-37/64 (W) x 18-5/32 (D) x 7-27/32 (H) )
(Normal) 
619 mm (W) x 461 mm (D) x 199 mm (H) (24-3/8 (W) x 18-5/32 (D) x 7-27/32 (H)) 
(Tray extended)
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification 
changes for product improvement without prior notice. The performance specification figures indicated are 
nominal values of production units and there may be some deviations from these values in individual units.
 Use caution when you turn on the power and when printing is taking place, as the offset tray may move up and 
down.Note
Downloaded From ManualsPrinter.com Manuals 
						

							141
PERIPHERAL DEVICES AND SUPPLIES
6
500-SHEET PAPER FEED UNIT/
2 x 500-SHEET PAPER FEED UNIT
These paper feed units provide the convenience of increased paper capacity for the machine and a greater choice of 
paper sizes readily available for copying.
The MX-DE10 contains one 500-sheet paper tray and the MX-DE11 contains two 500-sheet paper trays.
Part names
Specifications
MX-DE10 MX-DE11
PaperSizeB5 to A3 (8-1/2 x 11  to 11 x 17)
Weight56 g/m2 to 105 g/m2 (15 lbs. to 28 lbs.)
Paper 
capacityUpper tray500 sheets (80 g/m2 (21 lbs.) 500 sheets (80 g/m2 (21 lbs.)
Lower tray— 500 sheets (80 g/m2 (21 lbs.)
WeightApprox. 7.0 kg (15.5 lbs.) Approx. 13.2 kg (29.2 lbs.)
Dimensions596 mm (W) x 498 mm (D) x 102 mm (H)
(23-15/32 (W) x 19-39/64 (D) x 4-1/64 (H))596 mm (W) x 498 mm(D) x 202 mm (H)
(23-15/32 (W) x 19-39/64 (D) x 7-61/64 (H))
Power supplyDrawn from the machine
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification 
changes for product improvement without prior notice. The performance specification figures indicated are 
nominal values of production units and there may be some deviations from these values in individual units.
Tr a y500-SHEET PAPER FEED UNIT
(MX-DE10)
Side cover2x500-SHEET PAPER FEED UNIT 
(MX-DE11)
Side cover
Tr a y
Note
Downloaded From ManualsPrinter.com Manuals 
						

							142
PERIPHERAL DEVICES AND SUPPLIES
REVERSING SINGLE PASS FEEDER
The reversing single pass feeder (RSPF) can automatically feed multi-page documents.
If the RSPF is installed, two-sided originals can be copied automatically without having to manually turn them over.
Part names
Specifications
* When paper weight is 90 g/m2 (24 lbs.).
STORAGE OF SUPPLIES
Standard supplies for this product that are to be replaced by the user are paper and the toner cartridge.
PROPER STORAGE
Store the supplies in a location that is:
 clean and dry,
 at a stable temperature,
 not exposed to direct sunlight.
Store paper in the wrapper and lying flat.
Paper stored out of the wrapper or in packages 
standing on end may curl or get damp, resulting in 
paper misfeeds.
MX-RP10
Acceptable originals
Weight35 g/m2 to 128 g/m2 (9 lbs. to 34 lbs. )
(52 g/m2 to 105 g/m2 (14 lbs. to 28 lbs.) for two-sided original)
SizeA5 to A3 (5-1/2 x 8-1/2 to 11 x 17)
CapacityUp to 100 sheets* (Thickness 13 mm (33/64) and below)
Power supplyDrawn from the machine
Detectable original sizesA5 to A3 (5-1/2 x 8-1/2 to 11 x 17)
WeightApprox. 7.4 kg (16.4 lbs.)
Dimensions586 mm (W) x 495 mm (D) x 187 mm (H)
(22-1/16 (W) x 19-31/64 (D) x 7-23/64 (H))
Exit areaReversing trayDocument transport cover
Document transport cover knob
Original guides
Document feeder trayDocument feeder 
cover
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification 
changes for product improvement without prior notice. The performance specification figures indicated are 
nominal values of production units and there may be some deviations from these values in individual units.Note
For best copying results, be sure to use only SHARP products. Only genuine SHARP consumables carry 
the Genuine Supplies label.
GENUINE SUPPLIES
Supply and Consumables
The supply of spare parts for a repair of the appliance is guaranteed for at least 7 years following the termination 
of production. Spare parts are those parts of the apparatus which may break down within the scope of the ordinary 
use of the product - whereas those parts which normally exceed the life of the product are not to be considered as 
spare parts. Consumables too, are available for 7 years following the termination of production.
Downloaded From ManualsPrinter.com Manuals 
						

							143
9
Chapter 9
APPENDIX
SPECIFICATIONS
ModelMX-M260 MX-M310
Ty p eDigital Multifunction System, Desktop
Photoconductive typeOPC drum
Document glass typeFixed
Copy systemDry, electrostatic transfer
OriginalsSheets, bound documents
Originals sizeMax. A3 (11 x 17)
Copy sizeMax. A3 (11 x 17)
Min. A6 (5-1/2 x 8-1/2)
Image loss: Max. 4 mm (5/32) (leading and trailing edges)
Max. 6 mm (11/64) (along other edges in total)
Copying speed 
(one-sided copying at 
100% copy ratio)14 copies/min. 11 x 17
15 copies/min. A3
16 copies/min. 8-1/2 x 14
17 copies/min. B4 (8-1/2 x 13)
18 copies/min. A4R (8-1/2 x 11R)
21 copies/min. B5R
26 copies/min. A5, B5, A4 
(5-1/2 x 8-1/2, 8-1/2 x 11)17 copies/min. A3 (11 x 17)
20 copies/min. B4 (8-1/2 x 13, 
8-1/2 x 14)
24 copies/min.  B5R, A4R (8-1/2 x 11R)
31 copies/min. A5, B5, A4 
(5-1/2 x 8-1/2, 8-1/2 x 11)
Continuous copyMax. 999 copies; subtractive counter
First-copy time*1Approx. 4.8 sec.
(When A4 (8-1/2 x 11) size paper is fed 
horizontally from tray1)Approx. 4.5 sec. 
(When A4 (8-1/2 x 11) size paper is fed 
horizontally from tray1)
Warm-up time*2Approx. 23 sec. Approx. 25 sec. 
Copy ratioVariable: 25% to 400%, in 1% increments (total 376 steps)
Fixed preset: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%, 400%
(25%, 50%, 64%, 77%, 100%, 121%, 129%, 200%, 400%)
Exposure systemDocument glass: Moving optical source, slit exposure (stationary platen) with 
automatic exposure function
RSPF: Moving original
Paper feedTwo automatic feeding paper trays (500 sheets x 2) + bypass tray (100 sheets)
Fusing systemHeat rollers
Developer systemMagnetic brush development
Light sourceXenon lamp
ResolutionScan: 400 x 600 dpi Output: 600 x 600 dpi
GradationScanning: 256 levels
Printing: Equivalent to 256 levels
Power supplyLocal voltage ±10% (For this machine power supply requirements, see the name 
plate located on the back of the machine.)
Power consumptionMax. 1.45 kW
Overall dimensions898 mm (W) x 628 mm (D) (35-11/32 (W) x 24-23/32 (D)) 
(with multi bypass tray expanded)
WeightApprox. 51.5 kg (113.6 lbs.) (Not includes toner car tridge)
Downloaded From ManualsPrinter.com Manuals 
						

							144
APPENDIX
*1 First copy time is measured with original on the document glass in full ready condition with fuser at operating temperature and 
mirror motor at operating speed, actual time may vary based on environment conditions.
*2 The warm-up time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions.
Dimensions (with RSPF)623 mm (W) x 628 mm (D) x 788 mm (H)
(24-17/32 (W) x 24-23/32 (D) x 31-1/64 (H))
Operating conditionsTemperature: 15°C to 30°C (59°F to 86°F), Humidity: 20% to 85%
Noise levelSound Power Level L
wA(1B=10dB)
Copying: 6.56[B] (MX-M260)
Copying: 6.55[B] (MX-M310)
Standby: 3.1[B] (MX-M260, MX-M310)
Sound Pressure Level L
pA (bystander positions)
Copying: 50[dB(A)] (MX-M260)
Copying: 49[dB(A)] (MX-M310)
Standby: 16[dB(A)] (MX-M260, MX-M310)
Sound Pressure Level L
pA (operator position)
Copying: 50[dB(A)] (MX-M260)
Copying: 49[dB(A)] (MX-M310)
Standby: 17[dB(A)] (MX-M260)
Standby: 17[dB(A)] (MX-M310)
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measured according
to RAL-UZ122: Edition
Jun. 2006)Ozone: 1.5 mg/h or less
Dust: 4.0 mg/h or less
Styrene: 1.0 mg/h or less
Benzene: 0.05mg/h or less
TVOC(Printing): 10mg/h or less
TVOC(Pre-Operating): 1mg/h or less
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification 
changes for product improvement without prior notice. The performance specification figures indicated are 
nominal values of production units. There may be some deviations from these values in individual units.Note
Downloaded From ManualsPrinter.com Manuals 
						

							145
7
SPECIFICATIONS FOR NETWORK 
SCANNER
* Multiple e-mail addresses (up to 100) can be stored as a group. Note that this may reduce the maximum number 
of destinations (normally 200) that can be stored.
Scanning margins
When scanning an original, the area indicated in the 
following diagram cannot be scanned.Maximum original size A3 or 11 x 17
Optical resolution 400dpi
Output resolution 200, 300, 600dpi
Output modes 1bit/pixel
Halftone processing Error dispersion (200/300/600dpi)
File format File type: TIFF/PDF
Compression mode: MH (G3)/MMR (G4)/NONE
File creation method One file for all pages/One file per each 1 to 6 pages
Two-sided originals Possible (when an RSPF is installed)
Scan destinations Scan to FTP, Scan to Desktop, Scan to E-mail
Web browser Internet Explorer 6.0 or later (Windows), Netscape Navigator 9 or 
later  (Windows), Firefox: 2.0 or later (Windows), Safari 1.5 or later 
(Macintosh)
Management system Uses built-in Web server
Network protocol TCP/IP, SMTP, LDAP, FTP
Supported mail system Mail servers supporting SMTP
LAN connectivity 10Base-T/100Base-TX
Number of destinations 200 maximum
Number of destinations for Scan To E-mail 
broadcast transmission100 maximum*
Some discrepancies may exist in the illustrations and content due to improvements to the machine.
Area that can 
be scanned Scanning 
marginsScan size
setting
Scan size
setting Approx. 2.5 mm (0.1)
Approx. 2.5 mm (0.1)Approx. 2.5 mm (0.1) Approx. 2.5 mm (0.1)
Downloaded From ManualsPrinter.com Manuals 
						

							146
INDEX
Symbols
[#/P] key .......................................................11, 93, 94
2 - 8
2 x 500-sheet paper feed unit ................132, 139, 141
256MB expansion memory board ..........................139
[2-SIDED COPY] key ...................................22, 28, 29
500-sheet paper feed unit ......................132, 139, 141
512MB expansion memory board ..........................139
8MB fax memory ......................................................39
A
ABCDEF configuration .............................................92
About the web page .................................................57
Accessing web pages ..............................................56
Account control ......................................................103
Account number .......................................................95
Address book screen ...............................................71
Adjusting the exposure.............................................30
Administrator password....................................96, 109
Administrator setting list ...........................................99
Administrator settings...............................................96
- Account control ...............................................103
- Change administrator password .....................109
- Copy settings ..................................................110
- Device control .................................................107
- Energy save ....................................................105
- Operation settings ...........................................106
- Print settings ...................................................111
- Product key .....................................................109
- Scanner settings .............................................115
Audting mode ...........................................................95
[AUTO IMAGE] key ..................................................31
Auto tray switching ...................................................92
Automatic ratio selection ..........................................31
Automatic two-sided copying
- Document glass  ...............................................28
- RSPF ................................................................29
AZERTY configuration .............................................92
B
B/W reverse copy .....................................................51
[B/W REVERSE] key..........................................40, 51
Barcode font kit ......................................................139
Basic settings for network scanning .........................58
Basic transmission method ......................................72
[BINDING CHANGE] key .........................................28
Bypass feed .............................................................27
Bypass tray ........................................10, 27, 129, 138
Bypass tray extension ........................................10, 19
[BYPASS TRAY] key................................................21
Bypass tray paper feed roller .................................138
Bypass tray paper guides.........................................10
C
Card shot..................................................................52
[CARD SHOT] key .............................................40, 52
Canceling an e-mail/FTP transmission ....................83
Cautions on handling the machine .............................5
Cautions on using the machine ..................................4Centre tray ........................................................ 9, 131
Centre tray counter function .................................... 25
Change administrator password ........................... 109
Changing a trays paper tray 
and paper size settings ........................................... 20
Changing the send settings ..................................... 82
Checking the IP address ......................................... 89
Checking the toner quantity .................................. 137
Cleaning the machine
- Bypass tray paper feed roller ......................... 138
- Document glass ............................................. 137
- RSPF.............................................................. 137
[CLEAR ALL] key .............................................. 11, 15
CLEAR key .................................................. 11, 23, 24
Clock ....................................................................... 90
Colour paper ........................................................... 16
Configuring DNS server settings ............................. 59
Configuring LDAP server settings ........................... 60
Configuring SMTP server settings........................... 59
Copy finishing functions
- Group copy....................................................... 36
- Offset function .................................................. 36
- Sort copy .......................................................... 36
- Staple sort ........................................................ 38
[COPY] key ............................................. 22, 134, 137
Copy number display .............................................. 22
Copy ratio display.................................................... 22
[COPY RATIO] key ..................................... 22, 32, 33
Copy settings ........................................................ 110
Cover copy .............................................................. 49
[COVER] key ..................................................... 40, 50
D
[DELETE] key.......................................................... 94
[DETAIL] key ........................................................... 13
Device control ....................................................... 107
Disabling of two-sided printing on 
letterhead paper ...................................................... 92
Display contrast................................................. 90, 92
Display message ................................................... 117
Display switching key .............................................. 13
Document cover .................................................. 9, 25
Document feeder cover ................................. 128, 142
Document feeder tray .............................. 24, 128, 142
Document glass ........................................................ 9
Document transport cover ............................. 128, 142
Document transport cover knob .................... 128, 142
Dual page copy ....................................................... 44
[DUAL PAGE COPY] key .................................. 40, 44
E
Editing and deleting programmed transmission 
destinations ............................................................. 66
Energy save .......................................................... 105
Enlargement key ..................................................... 32
Envelope ........................................................... 16, 17
Erase copy .............................................................. 43
[ERASE] key ..................................................... 40, 43
Downloaded From ManualsPrinter.com Manuals 
						

							147
Erase mode
- Centre erase .....................................................43
- Edge erase........................................................43
- Edge+centre erase............................................43
Erase width ..............................................................43
Error message........................................................117
Exit area .........................................................128, 142
Exposure adjustment ...............................................30
Exposure display ......................................................22
[EXPOSURE] key...............................................22, 30
Exposure value guidelines .......................................30
Extra image adjust ...................................................27
F
Facsimile expansion kit ..........................................139
[FAX JOB] key..........................................................13
[FAX] key
- DATA indicator ..................................................11
- LINE indicator ...................................................11
Finisher ............................................38, 133, 135, 139
Front cover .........................................9, 129, 130, 134
Fusing unit paper guide....................................10, 130
Fusing unit release lever ..................................10, 130
G
Greyed out ...............................................................12
Group copy...............................................................36
[GROUP] key ...........................................................37
H
Handles ......................................................................9
Heavy paper .............................................................16
How to place the original
- Document glass ................................................23
- RSPF ................................................................24
I
Icon (Job status screen) ...........................................13
Important points when inserting paper
in the bypass tray .....................................................19
Important points when selecting an installation site ...4
[INFORMATION] key .............................................127
Initial settings ...........................................................15
[INTERRUPT] key ..............................................11, 35
Interrupting copy ......................................................35
J
[JOB BUILD] key ................................................40, 46
Job build mode ...................................................24, 46
Job list ......................................................................13
Job program
- Deleting .............................................................94
- Executing ..........................................................94
- Storing.........................................................92, 93
Job separator tray ..............................................9, 139
[JOB STATUS] key ............................................11, 13
Job status screen .....................................................13
L
Label ........................................................................16
Laser information .......................................................5
Layout ......................................................................47
Letterhead paper ..........................................16, 17, 28List print............................................................. 90, 92
Loading paper ......................................................... 16
Loading paper in the bypass tray ............................ 19
Loading the paper in the paper tray ........................ 18
[LOGOUT] key .................................................. 11, 95
M
Main screen of copy mode ...................................... 22
[MANUAL] key ......................................................... 48
Manual ratio selection ............................................. 32
Margin shift copy ..................................................... 42
[MARGIN SHIFT] key ........................................ 40, 42
[MENU] key ............................................................. 32
Message display ..................................................... 22
Metadata delivery (data entry) .................... 84, 85, 86
Metadata fields ........................................................ 88
Misfed original ....................................................... 128
Misfeed in an output tray ....................................... 133
Misfeed in the bypass tray .................................... 129
Misfeed in the centre tray ...................................... 131
Misfeed in the fusing area ..................................... 130
Misfeed in the lower paper tray ............................. 132
Misfeed in the machine ......................................... 129
Misfeed in the paper feed area ............................. 129
Misfeed in the upper exit area ............................... 133
Misfeed in the upper paper tray ............................ 131
Misfeed removal
- Bypass tray .................................................... 129
- Centre tray ..................................................... 131
- Lower paper tray ............................................ 132
- Machine.......................................................... 129
- Output tray ..................................................... 133
- Right tray ........................................................ 132
- RSPF.............................................................. 128
- Upper exit tray ................................................ 133
- Upper paper tray ............................................ 131
Misfeed removal guidance .................................... 127
Mixed feeding .......................................................... 26
Mode select keys .................................................... 11
Mode switching key ................................................. 13
Multi shot copy  ....................................................... 47
[MULTI SHOT] key ............................................ 40, 47
N
Network scanner expansion kit ............................. 139
Normal copying
- Document glass ............................................... 23
- RSPF................................................................ 24
Number of pages fed through the RSPF ................. 92
Number of pages sent using the network 
scanner function ...................................................... 92
Number of sent and received fax pages ................. 92
Number of times the stapler was used .................... 92
Number of two-sided copies .................................... 92
Numeric keys .......................................................... 11
O
Offset function ................................................... 36, 37
Offset tray ................................................ 38, 108, 140
Operation panel ......................................................... 9
Operation settings ................................................. 106
Optional equipment ............................................... 139
Downloaded From ManualsPrinter.com Manuals 
						

							148
Orientation of the original (Staple sort) ....................38
Original feed display.................................................22
Original guides .......................................................142
Original image type
- Photo ................................................................30
- Text ...................................................................30
- Text/photo .........................................................30
Original size ...........................................23, 24, 25, 48
Original size display .................................................22
[ORIGINAL SIZE] key ........................................40, 48
Originals that can be used in the RSPF ...................25
[OUTPUT] key ........................................22, 36, 37, 39
Output tray .............................................................133
P
Pamphlet copy .........................................................45
[PAMPHLET COPY] key ....................................40, 45
Paper........................................................................16
Paper capacity .........................................................16
Paper misfeeds ......................................................121
Paper select display .................................................22
[PAPER SELECT] key .....................21, 22, 23, 24, 27
Paper size ..........................................................16, 20
Paper size card ........................................................18
Paper size display ....................................................22
Paper tray.......................................10, 16, 18, 20, 131
Paper type ....................................................16, 20, 21
Paper weight ............................................................16
Part names and functions
- Operation panel ................................................11
Passwords................................................................68
Peripheral devices..................................................139
Photoconductive drum .....................................10, 129
Plain paper ...............................................................16
Points to note when making copies..........................25
Power off ..................................................................14
Power on ..................................................................14
Power outlet ...............................................................4
Power save modes
- Auto power shut-off mode .................................15
- Preheat mode ...................................................15
Power switch ........................................................9, 14
Preset enlargement ratios ........................................32
[PRINT JOB] key ......................................................13
[PRINT] key
- DATA indicator ..................................................11
- ONLINE indicator ..............................................11
Print settings ..........................................................111
Printer expansion kit...............................................139
[PRIORITY] key........................................................13
Problems when the network scanner function 
is used ....................................................................123
Product key ............................................................109
Programming custom index names..........................61
Protecting information programmed in the 
web page..................................................................68
PS3 expansion kit ..................................................139
Q
QWERTY configuration ............................................92R
[READ-END] key ................................... 37, 39, 46, 47
Recycled paper ....................................................... 16
Reduction key ......................................................... 32
Reduction/enlargement/zoom ................................. 31
Release roller ........................................................ 128
Replacing the toner cartridge ................................ 134
Restricting use of the network scanner function...... 69
Reversing tray ............................................... 128, 142
Right tray ....................................................... 132, 139
Roller rotating knob ................................. 10, 129, 130
Rotation copying ..................................................... 26
RSPF................................................. 24, 25, 128, 144
S
[SCAN] key
- DATA indicator ........................................... 11, 72
[SCAN TO] key ........................................................ 13
Scanner settings ................................................... 115
Scanning and transmitting a two-sided original ....... 76
Scanning settings .................................................... 78
Selecting the file format ........................................... 81
Selecting the original image type ............................ 30
Selecting the quality ................................................ 79
Selecting the resolution ........................................... 80
Setting the paper type in the bypass tray
- [PAPER SELECT] key ..................................... 21
- [SYSTEM SETTINGS] key ............................... 21
Setting up destination information ........................... 62
Shift direction .......................................................... 42
Side cover ....................................................... 10, 130
Side cover handle ................................................... 10
Sort copy ................................................................. 36
[SORT] key .............................................................. 37
Special modes
- B/W reverse copy ............................................. 51
- Card shot.......................................................... 52
- Cover copy ....................................................... 49
- Dual page copy ................................................ 44
- Erase copy ....................................................... 43
- Job build mode ................................................. 46
- Margin shift copy .............................................. 42
- Multi shot copy ................................................. 47
- Original size ..................................................... 48
- Pamphlet copy ................................................. 45
[SPECIAL MODES] key .............................. 22, 40, 41
Special papers ........................................................ 26
- Envelope .......................................................... 17
- Letterhead paper .............................................. 17
Specifications ........................................................ 143
Staple cartridge ..................................................... 135
Staple cartridge replacement ................................ 135
Staple case ................................................... 135, 140
Staple jam removal ............................................... 136
Staple sort ............................................................... 38
[STAPLE SORT] key ............................................... 39
Stapling positions .................................................... 38
[START] key ................................................ 11, 23, 24
[STOP/DELETE] key ............................................... 13
Storage of supplies ............................................... 142
[STORE/DELETE] key ...................................... 93, 94
Downloaded From ManualsPrinter.com Manuals