Sanyo Projector Plv Hd150 User Manual

31
DISPLAY ADJUST
Press SELECT button to show information of computer selected.
Current mode
Adjusts clamp position. When image has a dark bar(s), try this
adjustment.
Clamp
Press SELECT button at Current
mode icon to show  information of
computer connected.
Current mode
Press SELECT button at this icon
to display previous items.
Reset
Store
Closes DISPLAY ADJUST MENU.
Quit
Other icons operates as follows.
3
To store adjustment parameters, move a red frame pointer to
Store icon and then press SELECT...

32
IMAGE ADJUST MENU
Move a red frame pointer to
item to be selected and then
press SELECT button.IMAGE ADJUST
Menu icon
IMAGE ADJUSTMENTS
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button to move a red frame pointer to
IMAGE ADJUST Menu icon.1
3Press POINT UP/DOWN button to move a red arrow to level that
you want to set and then press SELECT button.
Normal picture level preset on this projector for AV mode.
Standard (AV)
Picture level with improved halftone for graphics....

33
DISPLAY ADJUST
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
IMAGE ADJUST Menu icon.1
2Press POINT UP/DOWN button to move a red frame pointer to
item that you want to adjust and then press SELECT button.
Level of each item is displayed.  Adjust each level by pressing
POINT LEFT/RIGHT button(s).
IMAGE ADJUST MENU
Press POINT LEFT button to decrease contrast, and POINT RIGHT
button to increase contrast.  (From 0 to 63.)
Press POINT LEFT...

34
Press POINT LEFT/RIGHT button(s) to change progressive scan
mode.  Dialog box display is changed to “Off” and progressive scan
mode to off. Press POINT LEFT/RIGHT button(s) again, progressive
scan mode to on. 
Press POINT LEFT/RIGHT button(s) to change noise reduction
mode.  Dialog box display is changed to “Off”, “L1”, “L2” or “L3” to
reduce noise (rough parts) of  image.
Off ·······Noise reduction OFF position.
L1 ········ Noise reduction LEVEL 1 position.
L2 ········ Noise reduction LEVEL 2...

35
DISPLAY ADJUST
To move the red frame pointer to MENU, and then press the
SELECT button. The message OK? is displayed. Move the
pointer to 
[Yes] and then press SELECT button.The COLOR
MANAGEMENT menu will be exited and the display will return
to the IMAGE ADJUST menu. (At this time, the image will stop
being paused and normal projection will resume.) After chang-
ing the COLOR MANAGEMENT settings, use the IMAGE
ADJUST menu to store the changed settings.
The check mark will be cleared and the effect of...

36
DISPLAY ADJUST
Reset all adjustment to previous figure.
Reset
Store
Closes IMAGE MENU.
Quit
Other icons operates as follows.
To store manually preset image, move a red frame pointer to Store
icon and press SELECT button. Image Level Menu will appear.
Move a red frame pointer to Image 1 to 10 where you want to set and
then press SELECT button. 
Message OK? is displayed. Move
pointer to [Yes] and then press SELECT button.
Image Level Menu
Move a red frame pointer to
any of Image 1 to 10 where you
want...

37
SETTING
SETTING MENU
Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button(s) to move a red-frame pointer to
SETTING icon.1
2
Language
Press POINT DOWN button to move a red-frame pointer to item
that you want to set and then press 
SELECT button.  Setting
dialog box appears.
When pressing SELECT
button at Language,
Language Menu appears.
SETTING MENU
Language used in ON-SCREEN MENU is selectable from among
English, German, French, Italian, Spanish, Portuguese, Dutch,...

38
SETTING
Logo
When this function is “On,” projector displays logo when starting up.
Menu position
Rear
When this function is “On,” picture is left / right reversed.  This
function is used to project the image to a rear projection screen.
Rear function
Press SELECT button at this icon
to display next items.
Press SELECT button at this icon
to display previous items.
This function is used to adjust the on-screen menu display position.
When a SELECT button is pressed, the adjustment screen is
displayed...

39
SETTING
On start
When this function is “On,” projector is automatically turned on just
by connecting AC Power cord to a wall outlet.
Note ; B e  sure to turn projector off properly (refer to section
“TURNING OFF PROJECTOR” on P22).  If projector is turned
off in wrong steps, On Start function does not operate
properly.
Power management
Time left until Lamp off.
Remote control
This projector has eight different remote control codes; the factory-
set normal code (Code 1) and the other seven codes (Code...

40
SETTING
Lamp counter reset
Key lock
Factory default
Press POINT UP/DOWN button to move a red frame pointer to
“Factory default” and then press 
SELECT button.  The message
Return to Factory default? is displayed.  Move the pointer to [Yes]
and then press SELECT button.
Another confirmation dialog box appears and select [Yes] 
and then
press SELECT button. Return the projector to Factory default.
This function returns all setting values except for the lamp counter to
the factory default settings.
This...