Sanyo Projector Plc Xu07N User Manual

Owners Manual
PLC-XU07N
Multimedia Projector
MODEL  

2
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of FCC Rules.  These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio...

3
IMPORTANT SAFETY INSTRUCTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for
later use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table.  The projector may fall, causing...

4
TABLE OF CONTENTS
FEATURES AND DESIGN 5
BEFORE OPERATION 16COMPUTER MODE 24
VIDEO MODE 30
SETTING 32
APPENDIX 33 PREPARATION 6
NAME OF EACH PART OF THE PROJECTOR 6
SETTING-UP THE PROJECTOR 7
POSITIONING THE PROJECTOR 8
ADJUSTABLE FEET 8
CONNECTING THE AC POWER CORD 8
VENTILATION 8
MOVING THE PROJECTOR 9
CONNECTING THE PROJECTOR10
TERMINALS OF THE PROJECTOR 10
CONNECTING TO THE VIDEO EQUIPMENT 11
CONNECTING TO THE IBM-COMPATIBLE COMPUTER12
CONNECTING TO THE MACINTOSH COMPUTER14
OPERATION OF THE REMOTE...

5
FEATURES AND DESIGN
This Multimedia Projector is designed with most advance technology for portability, durability, and ease for use.
The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal
display (LCD) technology.
uCompatibility
This projector is compatible with many different
types of personal computers and video devices,
including;
lIBM-compatible computers, including
laptops, up to 1280 x 1024 resolution.
lApple Macintosh and PowerBook...

6
PREPARATION
NAME OF EACH PART OF THE PROJECTOR
This Air Intake Vent
should not be blocked.
BOTTOM OF THE CABINET
BACK OF THE CABINET
CARRY HANDLE
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is
hot.  When using or installing the
projector, following attention should
be taken.
lDo not put a flammable object near
this part.  
Keep heat-sensitive objects away
from the exhaust vent.
lDo not touch this part especially
screws and metallic parts.  This part
will become hot while the projector is
used....

7
PREPARATION
SETTING-UP THE PROJECTOR
POSITIONING THE PROJECTOR
ROOM LIGHT
The brightness in the room has a great influence on the picture quality.  It is recommended to limit ambient
lighting in order to provide the best image.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by
twisting ADJUSTABLE FEET.  Projection angle can be
adjusted 0 to 2 degrees by rotating Adjustable Feet.
UP
UP DOWN
DOWN
ADJUSTABLE FEET
lThis projector is basically designed to project on a flat projection...

8
PREPARATION
lDo not cover the vent slot.
lKeep the rear grill at least one meter away from any object.
lMake sure that there is no object under the projector.  An
obstacle under the projector may prevent the projector from
taking the cooling air through the bottom vent slot.
This projector is equipped cooling fans for protection from overheating.  Pay attention to the following to
ensure the ventilation and avoid a possible risk of fire and malfunction.
VENTILATION
This projector uses nominal input...

9
PREPARATION
MOVING THE PROJECTOR
Use the Carry Handle when moving the Projector.
lReplace the lens cover and rotate the feet fully
clockwise (to shorten the feet) when moving the
projector to prevent damage to the cabinet.
NOTE
The carrying bag (supplied) is intended for protection
from dust and scratches on the surface of the cabinet,
and it is not designed to protect the LCD projector from
external shock.
Do not drop the projector, subject it to strong forces, or
put other things on the cabinet when...

Ý
COMPUTER INMONITOR OUT
CONTROL PORT
AUDIO INSERIAL
AUDIO OUT
(MONO)VIDEO R–AUDIO–LS-VIDEO
10
CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
Connect the computer output
to this terminal.  
(Refer to P12 ~15.)
When controlling the computer
with the Remote Control of this
projector, connect the mouse
port to this connector.  
(Refer to P12 ~15.)
Connect to the monitor to this
terminal.
(Refer to P12 ~15.)
This connector is used to
connect a computer to control
this projector with the PC.
(Refer to...