Sanyo Projector Plc Xt35l User Manual

31

Press	the	NO	SHOW	button	on	the	remote	control	to	black	
out	the	image.	To	restore	to	normal,	press	the	NO	SHOW	
button	again	or	press	any	other	button.
“No	show”	disappears	after	4	seconds.
NO SHOW button
Press	the	P-TIMER	button	on	the	remote	control.	 The	P-Timer	
display	 “00:00”	appears	on	the	screen	and	the	countdown	
starts	(00:00–59:59).
To	stop	the	countdown,	press	the	P-TIMER	button.	 To	cancel	
the	P-Timer	function,	press	the	P-TIMER	button	again.
P-TIMER button
P-Timer	display
✔Note:
	 •...

3
Spotlight
Pointer	Function
Pointer
✔Note:
	 •	You	can	choose	the	size	of	Spotlight	(Large/Middle/ Small)	and	the	pattern	of	Pointer	(Arrow/Finger/Dot)	
in	the	Setting	Menu.	See	 “Pointer”	on	page	49.
This	remote	control	emits	a	laser	beam	from	the	laser	light	window.	Press	the	LASER	button	to	activate	the	
laser	pointer.	
The	signal	emission	indicator	lights	red	and	the	red	laser	beam	is	emitted.	If	the	LASER	button	is	
pressed	for	more	than	one	minute	or	if	it	is	released,	the	laser	light	goes...

33
Move	the	pointer	on	the	screen	
with	this	button.	
PRESENTATION POINTER 
button
R-CLICK button
L-CLICK buttonActs	as	right	(click)	mouse	
button	while	the	projector	and	a	
computer	are	connected	with	a	
USB	cable.
Acts	as	left	(click)	mouse	
button	while	the	projector	
and	a	computer	are	
connected	with	a	USB	
cable.
Wireless	Mouse	Operation
The	remote	control	can	be	used	as	a	wireless	mouse	for	your	computer.	
Before	operating	the	wireless	mouse,	connect	
your	computer	and	the	projector	with	the...

34
Remote Control
INPUT buttons
Top Control
Input	
Press	the	INPUT	1,	INPUT	2,	or	INPUT	3	buttons	on	the	
remote	control.	The	input	source	appears	on	the	screen	as	
you	press	each	button.	Select	the	connected	input	source.
Remote Control Operation
INPUT button
Press	the	INPUT	button	on	the	top	control.	It	switches	to	
INPUT	1,	INPUT	2,	and	INPUT	3	as	you	press	the	INPUT	
button.	
Before	using	the	INPUT	button	on	the	top	control,	you	must	
select	a	correct	input	source	by	On-Screen	Menu	and	the	
latest...

35
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
7 8	buttons	to	move	the	red	
frame	pointer	to	the	Input	Menu	icon.1
Use	the	Point	ed	buttons	to	move	the	red	arrow	
pointer	to	the	desired	input	and	then	press	the	
SELECT	button.	 The	signal	format	menu	appears.2
Use	the	Point	ed	buttons	to	select	the	desired	signal	
format	and	then	press	the	SELECT	button.3
Menu Operation
When	the	RGB	PC	(analog)	signal	is	
connectedRGB (PC analog)
INPUT 1
When	the	RGB	PC	(digital)	signal	is...

36
Press	the 	MENU 	button 	to 	display 	the 	On-Screen	
Menu. 	Use 	the 	Point 	
7  8	buttons 	to 	move 	the 	red	
frame	pointer	to	the	 AV	System	Menu	icon.1
Video	System	Selection
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use	the 	Point 	ed	buttons 	to 	move 	the 	red 	arrow	
pointer 	to 	the 	desired 	system 	and 	then 	press 	the	
SELECT	button.2
If	the	projector	cannot	reproduce	proper	video	image,	
select	a	specific	broadcast	signal	format	from	among	PAL,	
SECAM,	NTSC,	NTSC...

37

The	Auto	PC	 Adjustment	
function	operates	to	adjust	
the	projector.	
PC System Menu
The	PC	System	Menu	icon	
	 Selected	system	is		 	
	 displayed.
Systems	in	this	dialog	box	
can	be	selected.
Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
7 8	buttons	to	move	the	red	
frame	pointer	to	the	PC	System	Menu	icon.
Use	the	Point	ed	buttons	to	move	the	red	arrow	
pointer	to	the	desired	system	and	then	press	the	
SELECT	button.		
1
2
Custom	Mode	(1–10)	set	in	the	
PC	 Adjust	Menu...

38

Auto	PC	Adjustment	function	is	provided	to	automatically	adjust	Fine	sync,	 Total	dots,	Horizontal	and	Vertical	
positions	to	conform	to	your	computer.
Move	the	red	frame	pointer	to	 Auto	
PC	 Adj.	and	press	the	SELECT	button.
“Please	wait...”	appears	while	the	
Auto	PC	adjustment	is	in	process.
PC Adjust Menu
PC	 Adjust	Menu	icon
To store adjustment parameters
The	adjusted	parameters	from	the	 Auto	PC	Adjustment	can	
be	stored	in	the	projector.	Once	the	parameters	are	stored,	
the	setting	can	be...

39

Press	the	MENU	button	to	display	the	On-Screen	
Menu.	Use	the	Point	
7 8	buttons	to	move	the	red	
frame	pointer	to	the	PC	 Adjust	Menu	icon.1
2Use	the	Point	ed	buttons	to	move	the	red	frame	
pointer	to	the	desired	item	and	then	press	the	SELECT	
button	to	display	the	adjustment	dialog	box.	Use	the	
Point	
7 8	buttons	to	adjust	the	setting	value.Move	the	red	frame	pointer	
to	the	desired	item	and	
press	the	SELECT	button.
PC Adjust Menu
PC	 Adjust	Menu	icon
Use	the	Point	7 8	buttons	to	adjust	the...

40

Use	the	Point	7 8	buttons	to	adjust	the	horizontal	area	
displayed	by	this	projector.
Display area H
Use	the	Point	7 8	buttons	to	adjust	the	vertical	area	
displayed	by	this	projector.
Display area V
Reset
Store
Exit	the	PC	 Adjust	Menu.
Quit
To	store	the	adjusted	data,	select	Store	and	then	press	the	
SELECT	button.	Move	the	red	arrow	pointer	to	one	of	the	
Modes	1	to	10	in	which	you	want	to	store,	and	then	press	
the	SELECT	button.
To	reset	the	adjusted	data,	select	Reset	and	press	the	
SELECT...