Sanyo Projector Plc Wxu700a User Manual

31

Computer Input
Choose Computer   by  pressing  the  INPUT  button  on  the  top  control  or  press  the  COMPUTER  button  on  the 
remote control.
Before using these buttons, correct input source should be selected through Menu operation as described 
below.
Input Source Selection (Computer : RGB)
Direct Operation
Menu Operation
Note:
   When the Input Search function is set to On1 or  On, 
the input signal will be searched automatically (p.48).
1

3
Press the MENU button to...

3

Computer Input
PC System Menu
PC System Menu
Computer System Selection
This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC 
adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format 
and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are 
shown on pages 76-77)
One of the following messages may appear when:
The projector cannot...

33

Computer Input
Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, Vertical, 
Clamp, Display area H and Display area V positions to conform to your computer.
PC adjust Menu
Auto PC adjustment
To store adjustment parameters
The adjusted parameters from the Auto PC adjustment can 
be stored in the projector. Once the parameters are stored, 
the setting can be done just by selecting a Mode (1–5) in 
the PC System Menu (see page 32). See also Store on 
page...

34

Computer Input
PC adjust Menu
Manual PC adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.  
Manual PC adjustment enables you to precisely adjust several parameters to match those signal formats. The 
projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall 
the setting for a specific computer. 
1

Use the Point ◄► buttons to adjust the value, eliminating a 
flicker from...

35

Store
To store the adjusted data, select Store and then press the 
Point ► or the SELECT button. Move the highlight to one of 
the Modes 1 to 5 in which you want to store, and then press 
the SELECT button.
Mode free
To clear the stored data, select Mode free and then press 
the Point ► or the SELECT button. Move the highlight to the 
mode that you want to clear and then press the SELECT 
button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i, 
  480p, 575p, 70p, 1035i
 or 1080i...

36

Computer Input
Image Select Menu
IMAGE button
Dynamic
Real
Image 1
Image 
Image 3
Image Mode Selection 
Image 4
Blackboard(Green)
Standard
Remote Control
IMAGE button
Select the desired image mode among Dynamic, Standard, 
Real, Blackboard (Green), Colorboard, Image 1, Image , 
Image 3 and Image 4 by pressing the IMAGE button on the 
remote control.
Standard
Picture mode with improved halftone for graphics.
Real
Blackboard (Green)
Image 1–4
Dynamic
Direct Operation
For viewing pictures in...

37

Computer Input
Image Adjust Menu
Image Adjustment
Reset
Press the MENU button to display the On-Screen 
Menu. Use the Point ▲▼ buttons to select Image 
adjust and then press the Point ► or the SELECT 
button.
1
Use the Point ▲▼ buttons select the desired item 
and then press the SELECT button to display the 
adjustment dialog box. Use the Point ◄► buttons to 
adjust the setting value.
Note:
• When White balance Red, Green or Blue is  
  adjusted, Color temp . will change to User.
• When...

38

Computer Input
Store
This projector has the picture screen resize function, which 
enables you to customize the image size.
Screen Menu
Screen Size Adjustment
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the original 
image size is larger than the screen size (1280 x 800), the 
projector enters to the panning mode automatically. Use the 
Point ▲▼◄►buttons to pan the image. When adjusted, the 
arrows will turn red. When reached to the correction...

39

Computer Input
Select Digital zoom +. The On-Screen Menu disappears and 
D . zoom +
 appears. Press the SELECT button to expand the 
image size. Use the Point ▲▼◄► buttons to pan the image. 
The Panning function can work only when the image is larger 
than the screen size.
A  projected  image  can  be  also  expanded  by  pressing  the 
D.ZOOM + button on the remote control. 
To exit the Digital zoom +/– mode, press any button except 
the D.ZOOM +/- buttons, SELECT and Point buttons.
Digital zoom +...

40

Choose Video or S-video by pressing the INPUT button on 
the top control or the VIDEO button on the remote control.
1

Video
Input Menu
Input Source Selection (Video, S-video)
Video Input
Direct Operation
Menu Operation
When video input signal is connected to the 
VIDEO jack, select Video.Video
When video input signal is connected to the S-
VIDEO jack, select S-video.S-video
Note:
  • 
Network  is  for  the  Network  function.  See  the  owner’s 
manual of “Network Set-up and Operation” .
  •...