Sanyo Plc Xu46 Projector User Manual

11
CONNECTING PROJECTOR
TERMINALS OF PROJECTOR
This projector has input and output terminals on its back for connecting computers and video equipment.  Refer to figures on
pages 11 to 13 and connect properly.
S – VIDEO
R – AUDIO  IN – LVIDEOY    –    Pb / Cb  –   Pr / Cr
RESET
CONTROL PORT 
USB
AUDIO IN
COMPUTERR –                          – LAUDIO OUT
(MONO)COMPUTER INDVI - I
MCI / WI
MONITOR  OUT
When controlling the computer
with Remote Control of this
projector, connect the mouse
port of your...

12
CONNECTING PROJECTOR
CONNECTING TO COMPUTER
R – AUDIO  IN – LVIDEOY    –    Pb / Cb  –   Pr / Cr
S – VIDEORESET
CONTROL PORT 
USB
AUDIO IN
COMPUTERR –                          – LAUDIO OUT
(MONO)COMPUTER INDVI - I
MCI / WI
MONITOR  OUT
IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA)
DVI-VGA Cable 
Monitor Output
Desktop type Laptop type
Audio Speaker
(stereo) Audio Amplifier
Control Cable
for Serial Port 
Audio Cable
(stereo) Terminal
Serial port PS/2 port Audio Output
Audio...

13
CONNECTING PROJECTOR
CONNECTING TO VIDEO EQUIPMENT
S – VIDEO
R – AUDIO  IN – LVIDEOY    –    Pb / Cb  –   Pr / Cr
RESET
CONTROL PORT 
USB
AUDIO IN
COMPUTERR –                          – LAUDIO OUT
(MONO)COMPUTER INDVI - I
MCI / WI
MONITOR  OUT
Video Source (example)
Video Cassette Recorder Video Disc Player
Video Cable
(RCA x 1)  S-VIDEO
Cable 
Audio AmplifierAudio Speaker 
(stereo) Audio Cable 
(Stereo) 
Terminals 
of the Projector
Use any of VIDEO jack, S-VIDEO
jack, or Y-Pb/Cb-Pr/Cr jacks.
•When...

14
BEFORE OPERATION
VOLUME
ON-OFF
FOCUS
ZOOM
D.ZOOM
MENUMUTE
NO SHOWFREEZE
AUTO PC ADJ.IMAGE
P-TIMER
LOCK
INPUT
KEYSTONE
OPERATION OF REMOTE CONTROL 
ON
ALL OFF
ALL-OFF SWITCH
Left Side
When using the Remote Control,
turn this switch to “ON.”  And turn it
to “ALL OFF” when it is not used.
Used to select input source.
(P22, 29)
Used to execute the item
selected, or to expand or
compress the image in
DIGITAL ZOOM +/– mode.
(P28)
It is also used as a PC
mouse in Wireless Mouse
Operation. (P38)
POWER ON-OFF...

15
BEFORE OPERATION
To insure safe operation, please observe the following precautions :
Use (2) AA, UM3 or R06 type alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the Remote Control to moisture, or heat.
Do not drop the Remote Control.
If a battery has leaked on Remote Control, carefully wipe case clean and install new batteries.
Risk of explosion if battery is replaced by an incorrect...

16
ON -- OFF
LAMP
REPLACE
WARNINGTEMP.READY
LAMP
INPUT
IMAGE
MENUVOLUME –VOLUME +
SELECTZOOMFOCUS
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close
MENU operation. (P17,
18)
MENU BUTTON
IMAGE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
INPUT BUTTON
WARNING TEMP. INDICATOR
LAMP INDICATOR
POINT (VOLUME + / – ) BUTTONS 
LAMP REPLACE INDICATOR
Used to select an
image level.  (P26, 31)
Lights  green when the
projector is ready to be
turned on.  And it
flashes green in Power...

17
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU OPERATION
OPERATING ON-SCREEN MENU
MENU BAR
POINTER
(red frame) MENU ICON
ITEM DATA
Press POINT LEFT/RIGHT
buttons to adjust value or
set function.
SELECT
BUTTON
POINTER (red frame)
Press POINT DOWN button to
move POINTER.
ITEM
Used to select the
item.SELECT BUTTON
Used to move the
Pointer UP/ DOWN/
LEFT/RIGHT .POINT BUTTON
REMOTE CONTROL You can control and adjust this projector through the ON-SCREEN
MENU.  Refer to the following...

18
BEFORE OPERATION
MENU BAR
PC SYSTEM MENU
Used to select
computer system.
(Refer to P22)
IMAGE ADJUST MENU
Used to adjust
computer image. 
[Contrast / Brightness
/ White Balance
(R/G/B) / Gamma]
(Refer to P27)
SETTING MENU
Used to change
settings of the projector
or reset Lamp Replace
Counter. 
(Refer to P34, 35)
SOUND MENU
Used to adjust
volume or mute
sound.
(Refer to P21)
IMAGE SELECT MENU
Used to select an
image level among
Standard, Real,
and Image 1 ~ 4.
(Refer to P26)
FOR PC SOURCEPress the MENU...

19
BASIC OPERATION
TURNING ON PROJECTOR
TURNING ON / OFF PROJECTOR 
Connect the projectors AC Power Cord into an AC outlet.  The
LAMP Indicator lights red, and the READY Indicator lights green.
Press the POWER ON-OFF button on the Top Control or on the
Remote Control to ON.  The LAMP Indicator dims, and the
Cooling Fans start to operate.  The Preparation Display appears
on the screen and the count-down starts. 
2
3
1Complete peripheral connections (with Computer, VCR, etc.)
before turning on the...

20
Press the FREEZE button on the Remote Control to freeze the picture
on-screen.  To cancel the FREEZE function, press the FREEZE button
again or press any other button.
PICTURE FREEZE FUNCTION
KEYSTONE ADJUSTMENT
1Press the KEYSTONE button on the Remote Control or select
Keystone in the SETTING menu.  (Refer to page 34.)  The
keystone dialog box appears.
2Correct keystone distortion by pressing the POINT
UP/DOWN/LEFT/RIGHT button(s).  Press the POINT UP button
to reduce the upper part of the image, and...