Sanyo Plc Xu46 Projector User Manual

21
BASIC OPERATION
Press the NO SHOW button on the Remote Control to black out the
image.  To restore to normal, press the NO SHOW button again or
press any other button.
NO SHOW FUNCTION
Message disappears after 4 seconds.
No show
Press the P-TIMER button on the Remote Control.  The timer display
“00 : 00” appears on the screen and the timer starts to count time (00 :
00 ~ 59 : 59).  
To stop P-TIMER display, press the P-TIMER button.  And then, press
the P-TIMER button again to cancel the P-TIMER...

22
COMPUTER INPUT
SELECTING INPUT SOURCE
MENU OPERATION
DIRECT OPERATION
Choose Computer by pressing the INPUT button on the Top Control or
on the Remote Control.
If the projector cannot reproduce proper image, select correct input
source through MENU OPERATION (see below).
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT button to move the red
frame pointer to the INPUT Menu icon.1
INPUT button
Computer
Video
SELECTING COMPUTER SYSTEM
This projector accepts various...

23
COMPUTER INPUT
PC ADJUSTMENT
AUTO PC ADJUSTMENT
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your
computer.  Auto PC Adjustment function can be operated as follows.
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT button to move the red
frame pointer to the PC ADJUST Menu icon.1
2Press the POINT DOWN button to move the red frame pointer to
the AUTO PC Adj. icon and then press the SELECT...

24
COMPUTER INPUT
MANUAL PC ADJUSTMENT
This projector can automatically tune the display signals from most personal computers currently distributed.  However,
some computers employ the special signal formats which may not be turned by Multi-Scan system of this projector.  In this
case, the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed
picture, and projected improperly.  
The MANUAL PC ADJUSTMENT function allows you to manually  adjust...

25
COMPUTER INPUT
NOTE : Fine sync, Total dots, Display area (H/V), and Full screen
cannot be adjusted when “1035i (HDTV)” or “1080i (HDTV)”
is selected in the PC SYSTEM Menu (P22).
Selects the area displayed by this projector.  Select the resolution at
the Display area dialog box.
Display area
Adjustment of the horizontal area displayed by this projector.  Press
the POINT LEFT/RIGHT button(s) to decrease/increase value and
then press the SELECT button.
Display area H
Adjustment of the vertical area...

26
COMPUTER INPUT
PICTURE IMAGE ADJUSTMENTS
IMAGE LEVEL SELECT (MENU)
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT button to move the red
frame pointer to the IMAGE SELECT Menu icon.1
2Press the POINT DOWN button to move the red frame pointer to
the level that you want to set and then press the SELECT button.
Move the red frame pointer to the
level and press the SELECT button.
The level being selected.
IMAGE SELECT MENU
Normal picture level preset on this...

27
COMPUTER INPUT
Press the POINT LEFT/RIGHT
buttons to adjust value.
Reset all adjustment to their previous levels.
Reset
Store
Closes the IMAGE MENU.
Quit
Other icons operate as follows.
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to move the red
frame pointer to the IMAGE ADJUST Menu icon.1
2Press the POINT DOWN button to move the red frame pointer to
the item that you want to adjust, and then press the SELECT
button.  The level of each item is...

28
COMPUTER INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT button(s) to move the
red frame pointer to the SCREEN Menu icon.
When Digital zoom + is selected, the ON-SCREEN MENU
disappears and the message “D. Zoom +” is displayed.  Press the
SELECT button to expand image size.  And press the POINT
UP/DOWN/LEFT/RIGHT button(s) to...

29
VIDEO INPUT
SELECTING INPUT SOURCE
MENU OPERATION
DIRECT OPERATION
Choose Video by pressing the INPUT button on the Top Control or on
the Remote Control.
If the projector cannot reproduce proper video source, select correct
input source through MENU OPERATION (see below).
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT button to move the red
frame pointer to the INPUT Menu icon.
Press the POINT DOWN button to move the red arrow pointer to
Video and then press the...

30
VIDEO INPUT
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
SELECTING VIDEO SYSTEM
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to move the red
frame pointer to the AV SYSTEM Menu icon.
Press the POINT DOWN button to move the red arrow pointer to
the system that you want to select and then press the SELECT
button.
1
2
If the projector cannot reproduce proper video image, it is necessary
to select a specific broadcast signal format...