Sanyo Plc Xu305 Projector User Manual

41

Video Input
Video System Selection
1AV System Menu (Video or S-Video)
AV System Menu (Component)

If	the 	projector 	cannot 	reproduce 	proper 	video 	image,	
select	 a	specific	 broadcast	 signal	format	 from	among	
PAL,	
SECAM, NTSC ,	NTSC 4 .43 ,	PAL-M	and PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The
	projector 	automatically 	detects 	an 	incoming 	video	
signal,	and	adjusts	itself	to	optimize	its	performance.
If	the	projector	cannot	reproduce	proper	video	image,	select	
a	specific...

42

Image Select Menu
Select the desired image mode among Dynamic, Standard, 
Cinema, Blackboard  (Green), Colorboard, Image  1, 
Image  2, Image  3  and Image  4  by  pressing  the  IMAGE 
button on the remote control.
Standard
Picture mode adjusted with fine tone.
Cinema
Blackboard (Green)
Image 1–4
IMAGE button
Dynamic
Cinema
Image Mode Selection 
For the image projected on a blackboard.
T h i s   m o d e   h e l p   e n h a n c e   t h e   i m a g e   p r o j e c t e d   o n   a 
blackboard.  This...

43

Video Input
Image Adjustment
1
2
Press the Point ◄ button to decrease the contrast; press the 
Point ► button to increase the contrast (from 0 to 63).
Press  the  Point ◄  button  to  decrease  the  brightness;  press  
the Point ► button to increase the brightness (from 0 to 63).
Contrast
Brightness
Press the Point ◄ button to lighten red tone; press the Point 
► button to deepen red tone (from 0 to 63).
White balance (Red)
Press  the  Point ◄  button  to  lighten  green  tone;  press  the 
Point ►...

44

Video Input
Use  the  Point ◄►  buttons  to  adjust  the  gamma  value  to 
obtain a better balance of contrast (from 0 to 15).
Gamma
Press  the  Point ◄  button  to  decrease  the  sharpness  of  the 
image;  press  the  Point ►  button  to  increase  the  sharpness 
of the image (from 0 to 15).
Sharpness
An  interlaced  video  signal  can  be  displayed  in  progressive 
mode. Select one of the following options.
 Off  .........   Disabled.
 L1  ..........   For an active picture.
 L2  .............

45

Video Input
This	projector	has	the	picture	screen	resize	function,	which	enables	you	to	customize	the	image	size.
Normal
Screen Size Adjustment
Screen Menu1

Provide	the	image	at	the	4:3	normal	video	aspect	ratio.
Custom
Adjust 	the 	screen 	scale 	and 	position 	manually 	with 	this	
function.
Press 	the 	SELECT 	button 	at 	
Custom 	and	Custom 	is	
displayed 	on 	the 	screen 	for 	a 	few 	seconds 	and 	then 	the	
Aspect	dialog	box	appears.
	Scale H/V 	.......... 	Adjust 	the...

46

Language
The	language	 used	in	the	 On-Screen	 Menu	is	available	 in	
English,  German,  French,  Italian,  Spanish,  Portuguese ,	
Dutch,  Swedish,  Finnish,  Polish,	Hungarian,  Romanian ,	
Russian, Chinese, Korean,	japanese  and	Thai.
Setting Menu
Setting
Setting
Press	the	MENU	button	to	display	the	On-Screen	
Menu.		Press	the	Point	
▲▼	buttons	to	select	Setting	
and	press	the	Point	
►	or	SELECT 	button	to	access	the	
submenu	items.
1
Use	the	Point	▲▼	buttons	to	select	the	desired	item	
and...

47

Setting
Note:
	 •	Auto  Keystone	corrects	 vertical	distortion	 only,	not	
correct	horizontal	distortion.
	 •	The	
Auto  Keystone 	function	 cannot	work	when	 the	
Ceiling 	feature	is	set	On	in	the	Setting	menu	(p.52).
	 •	Perfect 	correction 	of 	the 	image 	distortion 	cannot	
be 	ensured 	with 	the 	Auto 	setup 	function. 	If 	the	
distortion 	is 	not 	corrected 	properly 	by 	pressing 	the	
AUTO 	SETUP/CANCEL 	button, 	adjust 	manually	
by 	pressing 	the 	KEYSTONE 	button 	on 	the 	remote...

48

Keystone
This	function	is	used	to	store	or	reset	the	keystone	
correction	when	the	AC	power	cord	is	unplugged.	Use	the	
Point	
▲▼	buttons	to	switch	between	each	option.
	Store 	....... 	Keep	the	keystone	correction	even	when	the	
AC	power	cord	is	unplugged.
	Reset 	....... 	Release	the	keystone	correction	when	the	 AC	
power	cord	is	unplugged.
To	correct	keystone	distortion,	press	the	SELECT 	button.	
Keystone	appears	on	the	screen.	Use	the	Point	▲▼	
buttons	to	correct	keystone	distortion	(p.25)....

49

Setting
Logo (Logo and Logo PIN code lock settings)
Logo selectThis	function	 allows	you	to	customize	 the	screen	 logo	with	
Logo  select ,	capture,	Logo  PIN  code  lock 	and	Logo  PIN 
code change 	functions.
Note:
	 		When	
On 	is	 selected	 in	the	 Logo	 PIN	code	 lock	function,	
Logo  select ,	capture 	and 	Logo  PIN  code  change 
cannot	be	selected.
Logo select
This 	function 	decides 	on 	the 	starting-up 	display 	from	
among	following	options.	
	User 	........ 	Show	the	image	you...

50

Capture
Capture
This	function 	enables 	you 	to 	capture 	an 	image 	being	
projected 	to 	use 	it 	for 	a 	starting-up 	display 	or 	interval 	of	
presentations.
Select	capture	and	press	the	SELECT 	button.	
	
A 	confirmation	box	appears	and	select	 yes 	to	capture	the	
projected	image.
After 	capturing 	the 	projected 	image, 	go 	to 	the 	Logo 	select	
function	 and	set	it	to	
User .	Then	 the	captured	 image	will	be	
displayed 	the 	next 	time 	you 	turn 	on 	the 	projector 	or 	when	
you	press...