Sanyo Plc Xu305 Projector User Manual

Multimedia  Projector 
MODEL PLC-XU305
           PLC-XU355
           PLC-XU305K
           PLC-XU355K
Owner’s Manual
 Network Supported 
□		Wireless	LAN
	 	 	 	IEEE802.11b/g
□			 Wired	LAN
	 	 	 	100-Base-TX/10-Base-T
 Memory Viewer 
□		USB	Memory	Viewer		
				
*	Refer	to	the	owner’s	manuals																	
													below	for	details	about	network		
													and	memory	viewer	function.
■			Network	Set-up	and	Operation
■			Memory	viewer 



Features and Design
This Multimedia Projector is designed with the most advanced technology \
for portability, durability, and ease of use. 
This projector utilizes built-in multimedia features, a palette of 16.77\
 million colors, and matrix liquid crystal display 
(LCD) technology.
♦	Compact Design
 This  projector  is  designed  compact  in  size  and  weight. 
It  is  easy  to  carry  and  installed  anywhere  you  wish  to 
use.
♦ Simple Computer System Setting
 The  projector  has  the...

3

Table of Contents
Trademarks
Each	name 	of 	corporations 	or 	products 	in 	this 	book 	is 	either 	a 	registered 	trademark 	or 	a 	trademark 	of 	its 	respective	
corporation.
Features and Design   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Table of Contents .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .3
To the Owner .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  ....

4

To the Owner
CAUTION: TO  REDUCE  THE  RISK  OF  ELECTRIC 
SHOCK,  DO  NOT  REMOVE  COVER  (OR 
BACK) .  NO  USER-SERVICEABLE  PARTS 
INSIDE  EXCEPT  LAMP  REPLACEMENT  . 
R E F E R   S E R V I C I N G   T O   Q U A L I F I E D 
SERVICE PERSONNEL .
THIS	SYMBOL 	INDICATES 	THAT 	DANGEROUS	
VOLTAGE	 CONSTITUTING	 A	RISK	 OF	ELECTRIC	
SHOCK	IS	PRESENT 	WITHIN	THIS	UNIT.
THIS	SYMBOL 	INDICATES 	THAT 	THERE 	ARE	
IMPORTANT 	OPERATING 	AND 	MAINTENANCE	
I N S T R U C T I O N S 	I N 	T H E 	O W N E R '...

5

Safety Instructions
All	the	 safety	 and	operating	 instructions	 should	be	read	
before	the	product	is	operated.
Read	 all	of	the	 instructions	 given	here	and	retain	 them	
for	 later	 use.	Unplug	 this	projector	 from	AC	power	 supply	
before	 cleaning.	 Do	not	 use	 liquid	 or	aerosol	 cleaners.	
Use	a	damp	cloth	for	cleaning.
F o l l o w 	a l l 	w a r n i n g s 	a n d 	i n s t r u c t i o n s 	m a r k e d 	o n 	t h e	
projector.
For	 added	 protection	 to	the	 projector	 during	a	lightning...

6

Safety Instructions
Openings	in	the	 cabinet	 are	provided	 for	ventilation.	 To	
ensure	 reliable	 operation	 of	the	 product	 and	to	protect	 it	
from	 overheating,	 these	openings	 must	not	be	blocked	
or	covered.	
	CAUTION
Hot	 air	is	exhausted	 from	the	exhaust	 vent.	When	 using	
or 	installing 	the 	projector, 	the 	following 	precautions	
should	be	taken.	
–	Do	 not	put	any	 flammable	 object	or	spray	 can	near	 the	
projector,	hot	air	is	exhausted	from	the	air	vents.
–	Keep	the	exhaust	vent...

7

Compliance
Federal Communications Commission Notice
Note:	This	equipment	 has	been	 tested	 and	found	 to	comply	 with	the	limits	 for	a	Class	 B	digital	 device,	 pursuant	
to	 Part	 15	of	the	 FCC	 Rules.	 These	limits	are	designed	 to	provide	 reasonable	 protection	against	harmful	
interference	 in	a	residential	 installation.	 This	equipment	 generates,	 uses,	and	can	radiate	 radio	frequency	
energy,	 and	if	not	 installed	 and	used	 in	accordance	 with	the	instructions,	 may	cause	 harmful...

8

Part Names and Functions
①⑤⑨③②
Front
Back
④
①	Infrared Remote Receiver
②	Zoom Ring
③	Focus Ring
④	Projection Lens
⑤ Lens Cap
	 (See	page	63	for	attaching.)
		
⑥	Speaker
⑦	Exhaust Vent
 CAUTION
Hot	air	is	exhausted	from	the	exhaust	yivent.	Do	not	put	
heat-sensitive	objects	near	this	side.
⑧	Lamp Cover
⑨	Air Intake Vent 
⑩	USB Connector (Series B)
⑪	Terminals and Connectors
⑫ Top Controls and Indicators
⑬ LAN Connection Terminal
⑭ USB Connector (Series A)
⑮	Power Cord Connector
⑯	Filters
⑰	Adjustable...

9

Part Names and Functions
Rear Terminal 
⑦	S-VIDEO IN
	 Connect	the	S-VIDEO	output	signal	from	video	 equipment	to	this	jack	(p.17).
⑩	AUDIO IN
	 Connect	the	audio	output	signal	from	video	 equipment	connected	to	
⑦	or	⑪	to	this	jack.	
For	a	mono	audio	signal	(a	single	audio	jack),	
connect	it	to	the	L 	(MONO)	jack	(p.17).
⑨	COMPUTER 1 / COMPUTER  AUDIO IN
	 Connect	the	audio	output	(stereo)	from	a	 computer	or	video	equipment	connected	to	
②	
or	
④ 	to	this	jack.	(pp16,	18)
⑪	VIDEO IN
	 Connect...

10

Part Names and Functions
Top Control
⑨	LAMP REPLACE indicator
	 Lights	yellow	when	the	projection	lamp	reaches	its	 end	of	life	(pp.64,	72).
⑧	w ARNING indicator
	 –	Lights	red	when	the	projector	detects	an	abnormal	 condition.	
	 –	Blinks	red	when	the	internal	temperature	of	the	 projector	exceeds	the	operating	range	(pp.61,	72).
④	ON/STAND–By  button
Turn	the	projector	on	or	off	(pp.20-22).
⑤	 POwER indicator
	 –	Lights	red	when	the	projector	is	in	stand-by	mode.
	 –	Lights	green	during...