Sanyo Plc Xp200l Projector User Manual

31
1
2
Press the MENU button to display the On-Screen 
Menu. Use the Point 
7 8 buttons to move the red 
frame pointer to the Sound Menu icon.
Press the VOLUME+/– buttons on the side control or on the 
remote control to adjust the volume of Audio Output. The 
volume dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control to temporarily 
turn off the AUDIO OUT. To turn the AUDIO OUT back on, 
press the MUTE button again or press the VOLUME +/– 
buttons. 
Press the...

32
Operating with Remote Control
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons 
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the ZOOM buttons on the remote control to zoom in 
and out the image.
ZOOM buttons
Press the FOCUS buttons on the remote control to adjust 
focus of the image.
FOCUS buttons
See page 30 for details.
LENS SHIFT button
Remote Control
D .ZOOM 
button
SHUTTER 
button
AUTO PC...

33
Press the FREEZE button on the remote control to freeze 
the picture on the screen. To cancel the FREEZE function, 
press the FREEZE button again or press any other button.
FREEZE buttonFILTER button
Press and hold the FILTER button for more than five seconds 
to operate electrically operated filter to replace the filter.
KEy STONE button
Reduce  the  upper  width  with 
Point e button.  Re d u c e   t h e   l owe r   w i d t h 
with Point d button.  Reduce  the  left  part  with 
Point 7 button....

34
Pointer Function
Pointer
✔Note:
	 •	 You	can	choose	the	pattern	of	Pointer	(Arrow/Finger/Dot)	in	the	Setting	Menu	(p.	56)
You can move the Pointer of the projector with the remote control to emphasize a part of the projected image.  
Press the POINTER button to activate the Pointer 
function.1
2
3
MOUSE POINTER button
POINTER button
To cancel the Pointer function, press the POINTER 
button again or press any other button. 
Use the MOUSE POINTER button to move the Pointer. 
Wireless Mouse Operation
The...

35
Input 
Remote Control button operation
INPUT button
Press the INPUT button on the side control or the remote 
control. It switches to INPUT 1, INPUT 2, and INPUT 3 as 
you press the INPUT button.
Before using the INPUT button on the side control or the 
remote control, you must select a correct input source 
by On-Screen Menu and the latest input source will be 
displayed.
INPUT buttonInput 1
Input 2
Input 3
Side Control/Remote control button 
operation
Input Selection
Press the INPUT 1, INPUT 2, or...

36
Computer Input Source Selection
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
Press the MENU button to display the On-Screen Menu. Use 
the Point 7 8 buttons to move the red frame pointer to the 
INPUT Menu icon.
Use the Point ed buttons to move the red arrow pointer 
to the desired input and then press the SELECT button. The 
Source Select Menu appears. 
1
2
Input 1
INPUT MENU
Use the Point ed buttons to select the desired source and 
then press the SELECT button.3
When your computer is...

37
When the video input signal is connected to the Y-
Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When the video input signal is connected to the 
VIDEO jack, select Video.
When the video input signal is connected to the S-
VIDEO jack, select S-Video.
When connecting to video equipment, select the type of 
Video source in the Source Select Menu. 
WHEN SELECTING INPUT 3 (AV TERMINALS ) WHEN SELECTING INPUT 2 (5 BNC INPUT jACKS )
When the video input signal is connected to the Y-
Pb/Cb-Pr/Cr jacks, select...

38
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, 
WXGA, or UXGA (refer to “Compatible Computer Specifications” on pages 78–79). If a com\
puter is selected 
as a signal source, this projector automatically detects the signal format and tunes to project a proper image 
without any additional settings. (Some computers need to be set manually.) 
One of the following messages may appear when:
The projector cannot recognize the...

39
Auto PC Adjustment
Auto  PC  Adjustment  function  is  provided  to  automatically  adjust  Fine  sync, Total  dots,  Horizontal  and  Vertical  
positions to conform to your computer. 
Press  the  MENU  button  to  display  the  On-Screen  Menu.  Use 
the  Point 7  8  buttons  to  move  the  red  frame  pointer  to  the 
PC Adjust Menu icon.1
2Use  the  Point  ed  buttons  to  move  the  red  frame  pointer 
to  the  AUTO  PC  adj.  icon  and  then  press  the  SELECT  button 
twice. PC AD
jUST MENU...

40
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. 
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal formats. 
The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to 
recall the setting for a specific computer. 
✔Note:   The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected...