Home > Sanyo > Projector > Sanyo Plc Xp200l Projector User Manual

Sanyo Plc Xp200l Projector User Manual

Here you can view all the pages of manual Sanyo Plc Xp200l Projector User Manual. The Sanyo manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 71

71
WARNING: 
High voltages are used to operate this projector . Do not attempt to open the cabinet .
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector 
or  the  service  center.  Specify  the  model  number  and  explain  about  the  problem. We  will  advise  you  how  to  obtain 
service.
Appendix
The power is turned off 
automatically.
–   Power management function runs by initial setting.  Check “SETTING” section on page  
56.
–...

Page 72

72
Menu Tree
InputRGB (PC analog)Go to System (1)Input 1
Y, Pb/Cb,Pr/Cr
Computer Input/Video Input
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
Network
Video
RGB
Go to System (2)
Go to System (3)
Go to System (1)
Go to System (2)Video
Y, Pb/Cb,Pr/Cr
S-video
Go to System (3)
Go to System (2)
Input 2
Input 3
Go to System (1)
InputH-sync freq.V-sync freq.
Information
ScreenLanguageLamp statusPower management
Security
Remote control
0–630–63
Image AdjustContrastBrightnessColor ✽Tint ✽0–630–63
✔Note:
 
•	 The...

Page 73

73
Computer Input
System (1)Mode 1
Mode 2
Image SelectStandard
Real
Image 1
Image 10
ScreenNormal
True
Wide
Full screen
Digital zoom +
Digital zoom -
PC AdjustAuto PC adj.
Fine sync.
Total dots
Position H
Position V
Current mode
Clamp
Display area - H
Display area - V
Reset
Mode free
Store
Quit
0–31
Yes/No
Mode 1
Mode 10
Quit
✽ System displayed in the System Menu varies depending on the input signal.
✔Note:
 
•	 The	Menu	display	varies	depending	on	the	input	signal.
SVGA 1
SVGA 2
SVGA 3
Rear
Keystone...

Page 74

74
Computer Input/Video Input
SettingLanguage
Fan control
Quit
Position/Simple Menu
Blue/User/Black
Logo select
Capture
Logo PIN code lock
Quit
Auto/Normal/Eco 1/Eco 2
Yes/No
12 languages provided.
Menu
Logo
Lamp control
Filter control
Both/Front/Back
Normal/Max
Power management
Background
On/Off
Logo PIN code change
Quit
RC sensor
Ready
Off
Shut down
1–30 Min.
Quit
On/OffOn start
Pointer
Key lockSecurityOff
Projector
Remote Control
PIN code lockOff/On1/On2
PIN code change
On/Countdown Off/OffDisplay...

Page 75

75
Indicators and Projector Condition
Check the indicators for the projector condition.  
Indicators
Projector ConditionPOWERgreen LAMP/
SHUTTER
red/blue WARNING
TEMP.
red WARNING
FILTER
orange LAMP
REPLACE
orange
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY 
button to turn on the projector.
The projector is operating normally.
(The shutter is open)
The projector is operating normally.
(The shutter is closed)
The projector is preparing...

Page 76

76
The projector is detecting abnormal condition .
Indicators
Projector ConditionPOWERgreen LAMP/
SHUTTER
red/blue WARNING
TEMP.
red WARNING
FILTER
orange LAMP
REPLACE
orange
The temperature inside the projector is elevated close to the 
abnormally high level.
The temperature inside the projector is abnormally high. The 
projector cannot be turned on. When the projector is cooled 
down enough and the temperature returns to normal, the 
POWER indicator lights green and the projector can be turned 
on....

Page 77

77
The projector is detecting abnormal condition .
Indicators
Projector ConditionPOWERgreen LAMP/
SHUTTER
red/blue WARNING
TEMP.
red WARNING
FILTER
orange LAMP
REPLACE
orange
If the Filter counter reached a time set in the timer setting, 
a Filter replacement icon (Fig.2) appears on the screen and 
the WARNING FILTER indicator on the top panel lights up. 
Replace the filter as soon as possible. If the filter is out of 
scroll and the projector reaches a time set in the timer setting, 
Fig. 3 appears on...

Page 78

78
ON-SCREEN DISPLA yRESOLUTIONH-Freq . 
(kHz) V-Freq .(Hz)
VGA 1 640x480 31.470 59.880 
VGA 2 720x400 31.470 70.090 
VGA 3 640x400 31.470 70.090 
VGA 4 640x480 37.860 74.380 
VGA 5 640x480 37.860 72.810 
VGA 6 640x480 37.500 75.000 
VGA 7 640x480 43.269 85.000 
MAC LC13 640x48034.970 66.600 
MAC 13 640x480 35.000 66.670 
480p 640x480 31.470 59.880 
575p 768x575 31.250 50.000 
575i
768x576
(Interlace)15.625 50.000 
480i
640x480
(Interlace)15.734 60.000
SVGA 1 800x600 35.156 56.250 
SVGA 2 800x600 37.880...

Page 79

79
ON-SCREEN DISPLA yRESOLUTIONH-Freq . 
(kHz) V-Freq .(Hz)
D-VGA 640x480 31.470 59.940 
D-480p 720x480 31.470 59.880 
D-575p 720x575 31.250 50.000 
D-SVGA 800x600 37.879 60.320 
D-XGA 1024x768 43.363 60.000 
D-WXGA 1 1366x768 48.360 60.000 
D-WXGA 2 1360x768 47.700 60.000 
D-WXGA 3 1376x768 48.360 60.000 
D-WXGA 4 1360x768 56.160 72.000 
D-WXGA 5 1366x768 46.500 50.000 
D-WXGA 6 1280x768 47.776 59.870 
D-WXGA 7 1280x768 60.289 74.893 
D-WXGA 9 1280x800 49.600 60.050 
D-WXGA 10 1280x800 41.200 50.000...

Page 80

80
Technical Specifications
Mechanical Information 
 Projector Type  Multi-media Projector 
  Dimensions (W x H x D)  14.56” x 7.36” x 17.32” (370.0 mm x 187.0 mm x 439.9 mm) 
  Net Weight  25.1 lbs (11.4 kg) 
  Feet Adjustment  0˚ to 6.5˚           
 
Panel Resolution 
  LCD Panel System  1.3” TFT Active Matrix type, 3 panels  
  Panel Resolution  1,024 x 768 dots 
  Number of Pixels  2,359,296 (1,024 x 768 x 3 panels)           
 
Signal Compatibility 
  Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M,...
Start reading Sanyo Plc Xp200l Projector User Manual

Related Manuals for Sanyo Plc Xp200l Projector User Manual

All Sanyo manuals