Sanyo Plc Xf1000 Projector User Manual

31
Remote Control
INPUT buttons
Input 
Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button 
on the remote control. It switches to INPUT 1, INPUT 2, 
INPUT 3 or INPUT 4 as you press the INPUT button.
Before using the INPUT button on the remote control, you 
must select a correct input source by On-Screen Menu 
and the latest input source will be displayed.
Remote Control Operation
Side Control
INPUT button
Press the INPUT button on the side control. It switches to 
INPUT 1, INPUT 2, INPUT 3 and INPUT 4...

32
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the INPUT Menu icon.
Use the Point ed buttons to move the red arrow pointer 
to the desired input and then press the SELECT button. 
Then you can switch to the desired input. 1
2
Use the Point ed buttons to select the desired source 
and then press the SELECT button.
3
RGB (PC analog)
Menu Operation
Input Selection
Input 1
INPUT MENU
Move the pointer (red 
arrow) to the desired source 
and...

33
When the video input signal is connected to the S-VIDEO 
jack, select S-Video.
When the video input signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
When the video input signal is connected to the VIDEO 
jack, select Video.
When connecting to video equipment, select the type of 
Video source in the Source Select Menu. 
Video
y , Pb/Cb, Pr/Cr
S-Video
Menu Operation
Input Menu icon
Move the pointer (red arrow) to Input 
2 and press the SELECT button.
Input 2
Move the pointer (red...

34
Computer System Selection
This projector automatically tunes to various types of computers (refer to “Compatible Computer 
Specifications” on pages 75-76). If a computer is selected as a signal source, this projector automa\
tically 
detects the signal format and tunes to project a proper image without any additional settings. (Some computers 
need to be set manually.) 
One of the following messages may appear when:
When the projector cannot recognize the 
connected signal conforming to the provided...

35
Auto PC Adjustment
Auto  PC  Adjustment  function  is  provided  to  automatically  adjust  Fine  sync, Total  dots,  Horizontal  and  Vertical 
positions to conform to your computer. 
Press  the  MENU  button  to  display  the  On-Screen  Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the PC Adjust Menu icon.1
2
Use the Point  ed buttons to move the red frame pointer 
to  the  AUTO  PC  adj.  icon  and  then  press  the  SELECT 
button twice. PC AD
jUST MENU
Auto PC adj .
To store...

36
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. 
Manual PC Adjustment enables you to precisely adjust several parameters to match those special signal 
formats. The projector has 10 independent memory areas to store those manually adjusted parameters. It 
allows you to recall the setting for a specific computer. 
✔Note:   The PC Adjust Menu cannot be operated when the digital signal input on the DVI terminal is selected...

37
Exit the PC Adjust Menu.
To store the adjusted data, select Store and then press the 
SELECT button. Move the red arrow pointer to one of the Mode 
1 to 10 in which you want to store, and then press the SELECT 
button.
To reset the adjusted data, select Reset and press the SELECT 
button. A confirmation box appears and then select [Yes]. All 
adjustments will return to their previous figures.
To store the adjusted data . To clear the adjusted data .
To clear the adjusted data, select Mode free and...

38
Press the MENU button to display the On-Screen Menu. 
Use the Point 7 8 buttons to move the red frame pointer 
to the Image Select Menu icon.
1
2
Use the Point ed buttons to move the red frame pointer 
to the desired image level and then press the SELECT 
button.IMAGE SELECT MENU
Normal picture level preset on the projector. Standard
Picture level with improved halftone for graphics. Real
User preset picture adjustment in the Image Adjust Menu
(p. 47). IMAGE 1–10
Image Level Selection
Menu Operation...

39
✔Note:
• True, Full screen, and Digital zoom +/– cannot 
be selected when no signal is detected in the 
PC System Menu (p.34).
•  The  projector  cannot  display  and  resolution 
higher  than  1920  x  1200.  If  your  computer’s 
screen  resolution  is  higher  than  1920  x  1200, 
lower  the  resolution  before  connecting  the 
projector.
•  The image data other than XGA (1024 x 768) is 
modified to fit the screen size in initial mode.
•  The panning function may not operate properly 
if the...

40
Select Digital zoom +. The On-Screen Menu disappears and 
“D. zoom +” appears. Press the SELECT button to expand the 
image size. Use the Point ed7 8 buttons to pan the image. 
The Panning function can work only when the image is larger 
than the screen size.
You can also enter the Digital zoom + mode by pressing the 
D.ZOOM button on the remote control.Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and 
“D.zoom –” appears. Press the SELECT button to compress the 
image size. 
You...