Sanyo Plc Ef12n Projector User Manual
Here you can view all the pages of manual Sanyo Plc Ef12n Projector User Manual. The Sanyo manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
51 APPENDIX RECOMMENDATION TO ENJOY PICTURE IMAGE, USE THE PROJECTOR IN THE CLEAN ENVIRONMENT. USAGE IN THE CLEAN ENVIRONMENT IS RECOMMENDED. When used under the dusty or smoky conditions, dust may accumulate on the liquid crystal panel and lens inside it, and may resultantly be projected on the screen together with the picture. When the above symptoms are noticed contact the place where your authorized dealer or service station for the cleaning. TEMPERATURE WARNING INDICATOR AIR FILTER COVER AIR FILTER...
Page 52
52 Follow these steps to replace the lamp assembly. 1. Turn off the projector and allow the projector to cool thoroughly. 2. Disconnect the AC cord from the projector. 3. Remove 2 screws with a screwdriver and remove the lamp cover. 4. Remove 2 screws with a screwdriver and pull out the lamp assembly by grasping the handle. 5. Replace the lamp assembly. 6. Tighten 4 screws to secure the lamp cover to the lamp assembly. 7. Connect the detachable AC cord to the projector. 8. Reset the lamp replacement...
Page 53
53 Problem: No power. Image is out of focus. Try these Solutions: Plug the projector into an AC outlet. Turn the MAIN ON/OFF switch to ON. Press the POWER ON/OFF switch to ON. Be sure the READY INDICATOR light is ON. Wait 90 seconds after the projector is turned OFF before turning the projector back on. NOTE: After pressing the POWER ON/OFF button to OFF. The projector functions as indicated. 1. The LAMP POWER indicator will light and the READY indicator will turn off. 2. After 90 seconds, the READY...
Page 54
54 No sound. Problem: Check Reverse L/R feature. (See SETTING section on pages 48 ~ 49).Picture is L/R Reversed. Check Reverse T/B feature. (See SETTING section on pages 48 ~ 49).Picture is T/B inverted. Check Display feature. (See SETTING section on pages 48 ~ 49).Some displays are not seen during the operation. Check audio cable connection from audio input source. Adjust audio source. Press the VOLUME (+) button. Press the MUTE button. Check the batteries. Make sure nothing is blocking between...
Page 55
55 TECHNICAL SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Number of Pixels Color System Scanning Frequency Projection Image Size (Diagonal) Horizontal Resolution Projection Lens Motorized Lens Shift Throw Distance Projection Lamp AV Input Jacks Computer Audio Input JackVideo Monitor Output Jack Audio Monitor Output Jacks Computer Input 1 Jack Computer Input 2 Jack Other Jack Built-in Speaker Image Elevation Adjustment Voltage and Power Consumption Operating...