Sanyo Plc Ef12n Projector User Manual

Owners Manual
PLC-EF12N/12NL
Multimedia Projector
MODEL 
PLC-EF12E/12EL
PLC-EF12B/12BL 

2
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).  NO USER-
SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT.  REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT
OPERATING AND MAINTENANCE INSTRUCTIONS IN THE
OWNERS MANUAL WITH THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before operating this projector, read this...

3
SAFETY PRECAUTIONS
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners.  Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

4
COMPLIANCES
Federal Communication Commission Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference...

5
TABLE OF CONTENTS
FEATURES AND DESIGN 6
BEFORE OPERATION 23COMPUTER MODE 36
VIDEO MODE 44
SETTING 48
APPENDIX 50 PREPARATION 7
NAME OF EACH PART OF THE PROJECTOR 7
SETTING-UP THE PROJECTOR 8
CONNECTING THE AC POWER CORD 8
POSITIONING THE PROJECTOR 9
PICTURE LEVEL AND TILT ADJUSTMENT 10
MOVING THE PROJECTOR 10
CONNECTING THE PROJECTOR11
TERMINAL OF THE PROJECTOR 11
CONNECTING THE COMPUTER 13
CONNECTING THE VIDEO EQUIPMENT 21
CONTROLS AND INDICATORS 23
OPERATION OF THE REMOTE CONTROL 25
WIRELESS REMOTE...

6
FEATURES AND DESIGN
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of
use.  The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal
display (LCD) technology.
Compatibility
This projector widely accepts various video and
computer input signals including;
Computers
IBM-compatible and Macintosh computers up to
1600 x 1200 resolution.
6 Color Systems
NTSC, PAL, SECAM, NTSC 4.43, PAL-M...

7
PREPARATION
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot.
Observe the following when handling your
projector or choosing a location to install it.
Keep heat-sensitive objects away from the
exhaust port.
If you set the projector on top of a metallic
surface, the surface will become hot
because of the hot air exhaust. Be careful
when handling.
Do not touch the cabinet near to the
exhaust vent area, and especially screws
and metallic parts. These parts will become
hot while the projector...

8
PREPARATION
SETTING-UP THE PROJECTOR
This projector uses nominal input voltages of 100-120 V  or 200-240 V
AC.  The projector automatically selects the correct input voltage.  It is
designed to work with single-phase power systems having a grounded
neutral conductor.  To reduce the risk of electrical shock, do not plug
into any other type of power system.
Consult your authorized dealer or service station if you are not sure of
the type of power supply being in use.
Connect the projector with the...

9
PREPARATION
200
154
26.9 (8.2 m)600
462
80.7 (24.6 m)
40
77115154231308462600
100150200300400
POSITIONING THE PROJECTOR
ROOM LIGHT
This projector is basically designed to project on a flat projection surface.
This projector can be focused from 4.9 (1.5 m) ~ 80.7 (24.6 m).
Refer to the figure below as an example when positioning the projector to the screen.
The projector should be placed in a room with
limited light. Picture quality will be directly
affected by lightning conditions.Minimum...

10
PREPARATION
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or bump the projector, otherwise damages or malfunctions may result.
When carrying the projector, use a suitable carrying case.
Do not transport the projector by using a courier or transport service in an unsuitable transport case.  This
may cause damage to the projector.  To transport the projector through a courier or transport service,
consult your dealer and best case should be applied.
Use the carry handle when moving...