Sanyo Pdg Dht8000l Projector User Manual

81

Appendix
The projector is detecting abnormal condition .
Indicators
Projector ConditionPOWER
green
LAMP
red
WARNINGTEMP.
red
WARNINGFILTER
orange
SHUTTER
blue
LAMP 1/2REP.
orange
If the Filter counter reached a time set in the timer 
setting, a Filter replacement icon (Fig.2) appears 
on the screen and the WARNING FILTER indicator 
on the top panel lights up. Replace the filter as 
soon as possible. If the filter is out of scroll and the 
projector reaches a time set in the timer setting, Fig. 
3...

8

Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below 
and less than 230 MHz of Dot Clock.
Appendix
✽“True”  cannot  be  selected  when WUXGA1, WXGA+2,  UXGA1,  UXGA2,  UXGA3,  UXGA4  and  UXGA5  are 
selected. (p.40)
ON-SCREEN DISPLA yRESOLUTION H-Freq .(kHz)V-Freq .(Hz)
VGA 1640x48031.470 59.880 
VGA 2720x40031.470 70.090 
VGA 3640x40031.470 70.090 
VGA 4640x48037.860 74.380 
VGA 5640x48037.860 72.810...

8

Appendix
ON-SCREEN DISPLA yRESOLUTION H-Freq .(kHz)V-Freq .(Hz)
1080p
1920x108033.75030.000
1920x108028.12525.000
1920x108027.00024.000
1920x108067.50060.000
1920x108056.25050.000
1080psf/301920x108033.75060.000
1080psf/251920x108028.12550.000
1080psf/241920x108027.00048.000
When an input signal is digital from the DVI or HDMI terminal, refer to the chart below.
ON-SCREEN 
DISPLA yRESOLUTION H-Freq .(kHz)V-Freq .(Hz)
D-VGA640x48031.470 59.940 
D-480p720x48031.470 59.880 
D-575p720x57531.250...

84

Appendix
On-BoardOptional Interface Board
Input1Input2Dsub-DVIComponent-S-videoSDI
Analog PCScartDigitalAnalog PC
ComponentVideo/S-VideoAnalog PCScartDigitalAnalog PC
ComponentVideo/S-videoDigital
On-BoardInput1
Analog PCo    o    o    o    o    o    o    o    o    o    o    
Scarto    o    o    -        -        -        o    -        -        -        o    
Digitalo    o    o    o    o    o    -    -        o    o    o    -        
On-BoardInput2
Analog PCo    o    o    o    o    o    o    o    o...

85

Technical Specifications
Mechanical Information 
 Projector Type  Multi-media Projector 
  Dimensions (W x H x D)  15.75” x 9.55” x 20.61” (400.0 mm x 242.5 mm x 523.5 mm)
 
  Net Weight  43.2 lbs (19.6 kg)
 
  Feet Adjustment  ± 5˚           
              
DLP Chip 
 Projection System  0.95” Single DLP chip, High brightness color wheel x 2  
  Number of Pixels  2,073,600 pixels (1,920 x 1,080 dots)           
             
Signal Compatibility 
 Color System PAL, SECAM, NTSC, NTSC4.43, PAL-M, and...

86

Optional Parts
     Model No.
Optional Interface Board (DVI)    
: POA-AMD23ADI
Optional Interface Board (5-BNC)    
: POA-AMD25VD3
Optional Interface Board (Dual-SDI) 
: POA-AMD17SDID
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. 
to the sales dealer.
Appendix
l  The specifications are subject to change without notice.
l   Each projector has its own characteristics.
       
When projecting with several projectors on the same screen...

87

Configurations of Terminals
ANALOG (Mini D-sub 15 pin)
512341096781514131112
CONTROL PORT CONNECTOR (D-sub 9 pin)
DIGITAL DVI-D (DVI 4 PIN)
1917
21018
31119
41220
51321
61422
71523
81624
USB CONNECTOR (Series B)
2
3 4
1
Appendix
Input
Output
13579111315171918161412108642
HDMI (19 pin Type A)
8 7 6 5 4 3 2 1
LAN TERMINAL (Rj-45)
1TX+
TX–
RX+
4- - -
5- - -
6RX–
7- - -
8- - -
Serial
1- - -
RXD
TXD
4- - -
5SG
6- - -
7- - -
8- - -
9- - -
1Vcc
– Data
+ Data
4Ground...

88

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or 
lost the number and unable to operate the projector, contact the service center. 
Factory default set No:  1 2 3 4*
Factory default set No:  4 3 2 1*
*  S h o u l d   t h e   fo u r- d i g i t   n u m b e r   b e 
changed,  the  factory  set  number  will 
be invalid.
Put the label below (supplied) on in a prominent place of 
the projector’s body while it is locked with a PIN code.
While the...

89

Dimensions
Unit: inch (mm)
Appendix
0.28(7
.0)
9.21(234.0
)
9.55(242.5
)
4.45(113.0)
20.47(520.0
)
20.61(523.5
)
15.75(400.0)
8.31(211.0
)
5.0º
5.0º
19.96(507.1)
96.0º
6.02(153.0)5.63(143.0)
6.81(173.0)6.81(173.0)
5.08(129.0
)
4.65(118.0)
2.64(67.0
)
4.25(108.0
)
12.48(317.0
)
5.79(147.0)4.92(125.0)
6.50(165.0)6.50(165.0)
14.29(363.0
)
Screw Holes for Ceiling MountScrew: M8Depth: 0.393 (10.0) 

90

Serial Control Interface
This projector provides a function to control and monitor the projector's operations by using the RS-232C serial 
port.
Connect a RS-232C serial cross cable to SERIAL 
PORT IN on the projector and serial port on the PC.
 (See p.11)
Launch a communication software provided with PC 
and setup the communication condition as follows:
1
2
3
Baud rate : 9600 / 19200 bps
Parity check  : none
Stop bit   : 1
Flow control  : none
Data bit   : 8
Type the command for controlling the...