Samsung TFT LCD Television T4081F-L User Manual

							
English - 
Channel Control
Selecting the Antenna
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 
2.	Press the ENTER button to select “Antenna”.    Press the ▲ or ▼ button to select “Air” or “Cable”,then press the    ENTER button.
   Press the EXIT button to exit.
If the antenna is connected to ANT 1 IN (AIR),  select “Air” and if it is connected to ANT 2 IN   (CABLE), select “Cable”.
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE)   are connected, select the antenna input you want.   If the antenna input is not selected properly, noise   may appear on the screen.
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
Channel
Move   Enter Return
TVAntenna  : Air  Auto Program     Clear Scrambled ChannelChannel List     Name    Fine Tune     Signal Strength     LNA  : On
AirCable
or
Clearing Scrambled Channels - Digital
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 
2.	Press the ▲ or ▼ button to select "Clear Scrambled Channel", then press the      ENTER button.    It searches scrambled channels, which are to be removed from the list.
   To stop searching scrambled channels;       Press the ENTER button to select "Stop".       Press the ◄ button to select Yes, then press the ENTER button.
3.	When the scrambled channel searching is completed, press the ENTER button.
   Press the EXIT button to exit.
   Only cable mode is available. 
The Clear Scrambled Channel function is used to filter out scrambled channels afte r Auto Program is completed. It removes the scrambled channels from the list by tuning the digital ca\
ble channels. This process may take up to 20~30 minutes.
Clear Scrambled Channel
Stop
Removing scrambled channel.DTV Cable -1
0%
    Enter Return
Antenna  : Cable ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
  Press the ANTENNA button on the remote control.

BN68-01308A-00Eng_0723.indd   392007-07-23   ¿ÀÈÄ 2:13:01 
						

							
English - 40
Adding and Erasing Channels
You can add or delete a channel to display the channels you want. To use the Channel List function, first run Auto Program.
All  AddedFavoriteDefault List Mode : All    ►    
Channel List
Move   Enter Return
TV
CH
Channel List / All
Move                    Enter                    Page                   \
  Return
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
WatchAddDeleteFavorite
CH
Channel List / All
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4List ModeDelete All
Air 1 / 2
Add All
CH
Channel List / All
Move                    Enter                    Page                   \
Return
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
Channel List / All
Move                    Enter                                           \
       Return
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
WatchAddDeleteFavorite
List ModeDelete AllAdd All
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 
2.	Press the ▲ or ▼ button to select "Channel List", then press the     ENTER button.
3.	Press the ENTER button to select “All”.
4.	Press the  ◄, ►, ▲ or ▼ button to select a channel to delete, then press the     ENTER button.
   Press the ▲ or ▼ button to select “Delete”, then press the ENTER button to    delete the channel.
   The       mark will disappear.
 
5.	Press the ◄, ►, ▲ or ▼ button to select a channel to add, then press the     ENTER button.
   Press the ▲ or ▼ button to select “Add”, then press the ENTER button to    add the channel.
   The     mark will appear and the channel will be added.
   Press the EXIT button to exit.
   All selected channels will be shown on “Added" menu.
• P.MODE (Red) button: Press repeatedly to select “All”, “Added” or          “Favorite”. • S.MODE (Green) button: Press to add all channels deleted. • STILL (Yellow) button: Press to delete all channels memorized.
Antenna : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
Move                    Enter                    Page                   \
  Return
List ModeDelete AllAdd All
List ModeDelete AllAdd All

BN68-01308A-00Eng_0723.indd   402007-07-23   ¿ÀÈÄ 2:13:03 
						

							
English - 41
To Set-Up Your Favorite Channels
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 
2.	Press the ▲ or ▼ button to select "Channel List", then press the     ENTER button
3.	Press the ▲ or ▼ button to select "All" or "Added", then press the ENTER button.
4.		Press the  ◄, ►, ▲ or ▼ button to select your favorite channels to watch among the labeled channels. Then press the ENTER button.
   Press the ▲ or ▼ button to select “Favorite”, then press the ENTER button.
   The "    " symbol will be highlighted and the channel will be set as a Favorite.    To cancel your Favorite channel selection, press the ENTER button until the    "    " symbol is no longer highlighted.
   Press the EXIT button to exit.
   Only memorized channels can be set as favorite channels.    All favorite channels will be shown in the “Favorite” menu.
     To select the favorite channels you have set up, press the FAV.CH button  on the remote control.
You can set channels you watch frequently as favorites.
AllAddedFavoriteDefault List Mode  : All    ►    
Channel List
Move   Enter Return
TV
CH
Channel List / Added
Move                    Enter                      Page                 \
  Return
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
Channel List / Added
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
WatchAddDeleteFavorite
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
Move                    Enter                                           \
       ReturnList ModeDelete All
List ModeDelete All

BN68-01308A-00Eng_0723.indd   412007-07-23   ¿ÀÈÄ 2:13:04 
						

							
English - 42
Using the Channel Lists
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 
2.	Press the ▲ or ▼ button to select "Channel List", then press the     ENTER button.
3.	Press the ▲ or ▼ button to select “Default List Mode” (the channel list you want to      appear when you press CH LIST), then press the ENTER button.    Press the ▲ or ▼ button to select “All”, “Added” or “Favorite” then press the      ENTER button.
   The Channel list you have chosen will now be set. 
   Press the EXIT button to exit.
 Alternately, press the CH LIST button on the remote control to bring up the Channel Lists.
Displays your desired channel list automatically when you press CH LIST button on the remote. (Choose All, Added or Favorite)
Viewing the Channel Lists
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 
2.	Press the ▲ or ▼ button to select "Channel List", then press the     ENTER button.
3.	Press the ▲ or ▼ button to select “All”, “Added” or “Favorite”, then press the    ENTER button.
4.	Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.    To toggle between your all channels, add channels or favorite channels,     use the P.MODE (red) button on the remote control.
• P.MODE (Red) button: Press repeatedly to select “All”, “Added” or          “Favorite”
You can display a list of all channels, added channels or your favorite c\
hannels.
AllAddedFavoriteDefault List Mode : All    ►    
Channel List
Move   Enter Return
TV
AllAddedFavorite
AllAddedFavoriteDefault List Mode  : All    ►    
Channel List
Move   Enter Return
TV
CH
Channel List / All
Move                    Enter                    Page                   \
  Return
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
List ModeDelete AllAdd All

BN68-01308A-00Eng_0723.indd   422007-07-23   ¿ÀÈÄ 2:13:05 
						

							
English - 4
Labeling Channels
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.    Press the ▲ or ▼ button to select “Name”, then press the ENTER button.
2.	Press the ▲ or ▼ button to select the channel to be assigned a new name,    then press the ENTER button.    Press the ▲ or ▼ button to select a letter, a number or a blank (Results in this      sequence: A...Z, 0...9, +, -, *, /, blank).    Press the ► button to switch to the next field, which will be selected.    Select a second letter or digit by pressing the ▲ or ▼ button, as above.    Repeat the process to select the last three digits. When you have finished,    press the ENTER button to assign the new name.    To erase the assigned new name, select "Clear" by pressing the ◄ or ► button,    then press the ENTER button.
   Press the EXIT button to exit.
   The names of digital broadcasting channels are automatically assigned and        thus cannot be assigned by users.
Name
Move    Enter Return
TV
Air 2Air Air 4Air Air 6
ClearClearClearClearClear
Name
Move   Adjust Return
TV
Air 2Air Air 4Air Air 6
ClearClearClearClearClear
A▲▼
LNA (Low Noise Amplifier)
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 
2.	Press the ▲ or ▼ button to select “LNA”, then press the ENTER     button.
3.	Press the▲ or ▼ button to select “On”, then press the ENTER button.
   Press the EXIT button to exit.
   LNA functions only when antenna is set to Air or Cable.
   The LNA setting must be made separately for each channel.
   If the picture is noisy with the LNA set to On, select Off.
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal).
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
Antenna  : Air  Auto Program     Clear Scrambled ChannelChannel List     Name    Fine Tune     Signal Strength     LNA  : On 
Channel
Move   Enter Return
TV
OffOn
Channels can be labeled so that their call letters appear whenever the c\
hannel is selected.

BN68-01308A-00Eng_0723.indd   432007-07-23   ¿ÀÈÄ 2:13:06 
						

							
English - 44
Fine Tuning Analog Channels
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER button. 
2.	Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.
3.	Press the ◄ or ► button to adjust the fine tuning.    To store the fine tuning setting in the TV’s memory, press the ENTER button.
    If you do not store the fine-tuned channel in memory, adjustments are not saved.
4.	To reset the fine tuning setting, press the ▼ button to select "Reset",     then press  the ENTER button.
   Press the EXIT button to exit.     "*" will appear next to the name of fine-tuned channels.
    Only analog TV channels can be fine tuned.
Use fine tuning to manually adjust a particular channel for optimal reception.
Checking the Digital-Signal Strength
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 
2.	Press the ▲ or ▼ button to select “Signal Strength”, then press the ENTER     button.    If the signal strength meter indicates that the signal is weak, physically adjust your      antenna to increase the signal strength.    Continue to adjust the antenna until you find the best position with the strongest      signal.
   Press the EXIT button to exit
Unlike analog channels, which can vary in reception quality from “sno\
wy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, y ou cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital chan\
nels.
Signal Strength
    Enter Return
TV
OK
 Adjust  Save Return
Fine TuneAir 24
0
Reset
 Adjust  Save Return
Fine TuneAir 24
+
Reset
 Move  Enter Return
Fine TuneAir 24
0
Reset
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►LNA  : On ►
Channel
Move   Enter Return
TV
 Adjust  Save Return
Fine TuneAir 24 *
+
Reset
Fine Tuned

BN68-01308A-00Eng_0723.indd   442007-07-23   ¿ÀÈÄ 2:13:08 
						

							
English - 4
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,  depending upon your particular version of Windows and your particular vi\
deo card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases\
. (If not, contact your computer manufacturer or Samsung Dealer.)
1.	First, click on "Control Panel" on the Windows start menu.
2.	When the control panel window appears, click on "Appearance and Themes" and a      display dialog-box will appear.
3.	When the control panel window appears, click on "Display" and a display dialog-box       will appear.
4.	Navigate to the "Settings" tab on the display dialog-box.    The correct size setting (resolution)
   Optimum: 1920 X 1080 pixels
   If a vertical-frequency option exists on your display settings dialog box,     the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
PC Display
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically.  If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.
ModeResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)Pixel Clock Frequency (MHz)Sync Polarity (H/V)
IBM720 X 400 640 X 48031.469 31.46970.087 59.94028.322 25.175- / + - / -
VESA
640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1920 x 1080
37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 79.976  66.500
72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 75.025 60.000
31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 123.000 138.500
- / - - / - + /+ + /+ + /+ + /+ - / - - / - + /+ + /+ - / +
ModeResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)Pixel Clock Frequency (MHz)Sync Polarity (H/V)
IBM640 X 350 720 X 400 640 X 480
31.469 31.469 31.469
70.086 70.087 59.940
25.175 28.322 25.175
+ /- - / + - / -
VESA
800 x 600 1024 x 768 1280 x 1024 1920 x 1080
37.879 48.364 63.981 66.587
60.317 60.000 60.020 59.934
40.000 65.000 108.000 138.500
+ /+ - / - + /+ + /-
D-Sub Input
HDMI/DVI Input

BN68-01308A-00Eng_0723.indd   452007-07-23   ¿ÀÈÄ 2:13:08 
						

							
English - 46
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the ENTER button.    Press the ▲ or ▼ button to select "PC", then press the ENTER button.
   Change to the PC mode first.
2.	Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER button.
   Press the EXIT button to exit.
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.  The function also automatically fine-tunes the settings and adjusts the frequency values and positions.  
 This function does not work in DVI-Digital mode.
Setting up the TV with your PC
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the ENTER button.    Press the ▲ or ▼ button to select "PC", then press the ENTER button.
    Change to the PC mode first.
2.	Press the ENTER button to select "Image Lock".
3.	Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button.    Press the ◄ or ► button to adjust the screen quality.         Vertical stripes may appear or the picture may be blurry.        Press the ENTER button.
   Press the EXIT button to exit.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,  re-adjust the picture so that it is aligned on the center of the screen.
PCImage Lock       ►Position     ►Auto Adjustment       ►Image Reset      ►
TV
 Move   Enter Return
PCImage Lock       ►Position     ►Auto Adjustment       ►Image Reset      ►     
TV
 Move   Enter Return
Auto Adjustment in Progress. Please Wait
Setup▲MoreBlue Screen  : Off   ►Melody : Medium   ►PC       ►Home Theater PC  : Off   ►Light Effect  : In Watching TV  ►Energy Saving : Off   ►▼ More  
TV
 Move   Enter Return
Image LockCoarse        0Fine         0     
TV
 Move   Enter Return
0 ▲ Coarse  ▼
Move    Adjust Return

BN68-01308A-00Eng_0723.indd   462007-07-23   ¿ÀÈÄ 2:13:09 
						

							
English - 47
Changing the Screen Position
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the ENTER button.    Press the ▲ or ▼ button to select "PC", then press the ENTER button.
    Change to the PC mode first.
2.	Press the ▲ or ▼ button to select "Position", then press the ENTER button.
3.	Press the ▲ or ▼ button to adjust the V-Position.    Press the ◄ or ► button to adjust the H-Position.    Press the ENTER button.
   Press the EXIT button to exit.
Initializing the Screen Position or Color Settings You can replace all image settings with the factory default values.
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the ENTER button.    Press the ▲ or ▼ button to select "PC", then press the ENTER button.
    Change to the PC mode first.
2.	Press the ▲ or ▼ button to select "Image Reset", then press the ENTER button.
   Press the EXIT button to exit.
PCImage Lock       ►Position     ►Auto Adjustment       ►Image Reset      ►     
TV
 Move   Enter Return
TV
 Adjust    Enter Return
Position
PCImage Lock       ►Position     ►Auto Adjustment       ►Image Reset      ►     
TV
 Move   Enter Return
Image Reset is completed.
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2.	Press the ▲ or ▼ button to select “Home Theater PC”, then press the ENTER     button.
3.	Press the ▲ or  ▼ button to select “On” or "Off", then press the ENTER button.
 Off: Turns off the settings for screen-related functions in PC input mode.  On: Turns on the settings for screen-related functions in PC input mode to pr\
ovide more      dynamic scenes.
   Press the EXIT button to exit.
  This function is available only in PC mode.
Setting the Home Theater PC
This function enables you to view higher quality pictures while in PC Mode.  After setting the Home Theater PC function to On, you can go into the Detailed Settings  menu and make adjustments without affecting settings in the regular TV mode.
Setup▲MoreBlue Screen  : Off   ►Melody : Medium   ►PC       ►Home Theater PC  : Off   ►Light Effect  : In Watching TV  ►Energy Saving : Off   ►▼ More  
TV
 Move   Enter Return
Setup▲MoreBlue Screen  : Off   Melody : Medium   PC      Home Theater PC  : Off   Light Effect : In Watching TV  Energy Saving : Off   ▼ More  
TV
 Move   Enter Return
OffOn
▲
▲
▲
▲

BN68-01308A-00Eng_0723.indd   472007-07-23   ¿ÀÈÄ 2:13:11 
						

							
English - 48
Setting the Clock
Setting the clock is necessary in order to use the various timer feature\
s of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.)
Option 1: Setting the Clock Manually
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the ENTER button.    Press the ▲ or ▼ button to select "Time", then press the ENTER button.
2.	Press the ENTER button to select "Clock".
3.	Press the ENTER button to select “Clock Mode”.    Press the ▲ or ▼ button to select “Manual”, then press the ENTER button.
4.	Press the ▲ or ▼ button to select “Clock Set”, then press the ENTER button.
5.	Press the ◄ or ► button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”,    or “am/pm”. Set the date and time you want by pressing the ▲ or ▼ button,    then press the ENTER button.
   Press the EXIT button to exit.
    The current time will appear every time you press the INFO button.
    You can set the month, day, year, hour and minute directly by pressing the       number buttons on the remote control.
Time Setting
Time
Clock      ►Sleep Timer  : Off   ► Timer 1 : Inactivated   ►Timer 2 : Inactivated   ►Timer  : Inactivated   ► 
TV
 Move   Enter Return
- - / - - / - - - - / - - : - -  - -
ClockClock Mode  : Manual   ►Clock Set       ► Time Zone      ►DST : Off   ►
TV
 Move   Enter Return
Clock SetSet current date and time.TV
 Move   Adjust Return
Month▲▼
DayYear
HourMinuteam/pm
Clock SetSet current data and time.TV
Month▲▼
DayYear
HourMinuteam/pm112007
1200am
 Move   Adjust Return
SetupPlug & Play       ►Language : English   ►Time      ►Game Mode  : Off   ► V-Chip      ► Caption      ►Menu TransParency  : Medium ►▼More        
TV
 Move   Enter Exit
ClockClock Mode  : Manual  Clock Set        Time Zone      DST : Off   
TV
 Move   Enter Return
ManualAuto

BN68-01308A-00Eng_0723.indd   482007-07-23   ¿ÀÈÄ 2:13:12