Samsung Television UN60D7050VF User Manual

							▶
English
▶
How to set up manuallyTo set up your TV’s cable network connection manually, follow these steps:1.  Go to the Network Settings screen.  (MENU m 
→  Network 
→ Network Settings 
→  ENTER
E)
2. Select  Wired, press ENTER
E, and then 
press ENTER E again.The network test 
screen appears and the verification process 
starts.
3. Press  ENTER
E. The verification process 
stops. Select IP Settings on network 
connection screen. The IP Settings screen 
appears.
IP Settings
IP Mode   Manual
DNS Mode   Manual
DNS Server   0 . 0 . 0 . 0
IP Address 
 0 . 0 . 0 . 0
Subnet Mask   0 . 0 . 0 . 0
Gateway   0 . 0 . 0 . 0
OK
 
● The displayed image may differ depending on 
the model. 
						

							▶
English
▶
4. Select the field at the top, press ENTER
E, and then set IP Mode to Manual.
5.  Press the 
d button on your remote to go to the IP Address entry field, and 
then press ENTER E.
6.  Enter the first portion of the IP Address (for example, 105) into the first entry 
field using the number keys on your remote. Press the right arrow button to go 
to the next field.
7.  Enter the next portion of the IP Address. Press the right arrow button to go to 
the next field.
8.  Repeat the entry process for each field in the IP Address.
 
NIf you make a mistake when entering a number, re-enter the number to 
correct it. You can also press the up or down arrow button to change the 
number one unit at a time.  
						

							▶
English
▶
9. When done entering the IP Address, press ENTER
E.
10.  Press the down arrow key to go to the Subnet Mask fields, and then press 
ENTER
E.
11.  Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
12.  When done, select OK at the bottom of the page, and then press ENTER
E. 
The network test screen appears and the verification process starts. When the 
connection has been verified, the “Internet is connected successfully.” message 
appears.  
						

							▶
English
▶
 
❑
Wireless Network Setting
 
■
Connecting to a Wireless Network
You can connect your TV to your LAN through a standard wireless router or 
modem.
The LAN Port on the Wall
LAN CableWireless IP sharer  
(router having DHCP server) TV  
						

							▶
English
▶
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung 
recommends using IEEE 802.11n. When you play video over a network connect\
ion, 
the video may not play smoothly.
 
NNOTE
 
●To use a wireless network, your TV must be connected to a wireless IP sharer 
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV 
can use a DHCP or static IP address to connect to the wireless network.
 
●Select a channel for the wireless IP sharer that is not currently being used. If the 
channel set for the wireless IP sharer is currently being used by another device 
nearby, this will result in interference and communication failure.  
						

							▶
English
▶
 
●Your TV supports only the following wireless network security protocols:
 
–Authentication Mode : WEP, WPAPSK, WPA2PSK
 
–Encryption Type : WEP, TKIP, AES
 
●If you select the Pure High-throughput (Greenfield) 802.11n mode and the 
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or 
wireless router, Samsung TVs will not support a connection in compliance with 
new Wi-Fi certification specifications.
 
●If your wireless router supports WPS (Wi-Fi Protected Setup), you can 
connect to the network via PBC (Push Button Configuration) or PIN (Pe\
rsonal 
Identification Number). WPS will automatically configure the SSID and WPA key 
in either mode.  
						

							▶
English
▶
 
●If your router, modem, or device is not certified, it may not connect to the TV. 
Connection Methods: You can set up the wireless network connection in six 
ways:
 
–Auto Setup (Using the Auto Network Search function)
 
–Manual Setup
 
–WPS(PBC)
 
–One Foot Connection
 
–Plug & Access
 
–SWL (Samsung Wireless Link)  
						

							▶
English
▶
 
■
Automatic Network Setup
Most wireless networks have an optional security system that requires devices that 
access the network to transmit an encrypted security code called an Acce\
ss or 
Security Key. The Security Key is based on a Pass Phrase, typically a wo\
rd or a 
series of letters and numbers of a specified length you were asked to enter when 
you set up security for your wireless network. If you use this method of setting 
up the network connection, and have a Security Key for your wireless network, 
you will have to enter the Pass Phrase during the the automatic or manua\
l setup 
process.  
						

							▶
English
▶
How to set up automatically1.  Go to the Network Settings screen. 
(MENU
m 
→  Network 
→ Network 
Settings  → ENTER
E.
2. Select  Wireless (General), press 
ENTER E, and then press ENTER
E 
again.
3. The  Network  function searches for available 
wireless networks. When done, it displays a 
list of the available networks.
4.  In the list of networks, press the 
u or 
d button to select a network, and then 
press the ENTER E button twice.
 
NIf the wireless router is set to Hidden (Invisible), you have to select Add 
Network and enter the correct Network Name (SSID) and Security key to 
establish the connection.
Network Settings
Select a network connection type.
Wired
PreviousNext
CancelWireless (General)
WPS(PBC)
One Foot Connection
Set up wireless network by 
selecting your Wireless Router.  
You may need to enter security key 
depending on the setting of the 
Wireless Router.
 
● The displayed image may differ depending on the 
model.  
						

							▶
English
▶
5. If the Enter security key screen appears, go 
to step 6. If you select a wireless router that 
does not have security, go to step 8.
6.  If the router has security, enter the Security 
key (Security key or PIN).
 
NWhen you enter the Security key 
(Security key or PIN), use  u / 
d  / 
l / 
r 
buttons on your remote to select number/
characters. Press the
 ENTER E button to enter the characters.
 
NYou can also enter numbers by pressing the number buttons on your 
remote.
7.  When done, use the right arrow button to move the cursor to Next, and then 
press ENTER
E.
Network Settings
Enter security key.
a b cd e f1 23
g h ijk l4 56
m no p q r7 89
s tu vw xyz0
a/A DeleteSpace
Previous
Next
Cancel
0 entered
4/6
 
● The displayed image may differ depending on the 
model.