Samsung Television UN60D7050VF User Manual

							Sound Menu
▶
English
▶
 
❑
Changing the Preset Sound Modes
 
OMENU
m 
→  Sound 
→ Sound Mode 
→ ENTER
E
 
■
Sound Mode  t
Use the up and down arrow keys to select an option, and then press ENTER E.
 
●Standard: Selects the normal sound mode.
 
●Music: Emphasizes music over voices.
 
●Movie: Provides the best sound for movies.
 
●Clear Voice: Emphasizes voices over other sounds.
 
●Amplify: Increase the intensity of high-frequency sound to allow a better 
listening experience for the hearing impaired.
 
NIf Speaker Select is set to External Speaker, Sound Mode is disabled.  
						

							▶
English
▶
 
❑
Adjusting Sound Settings
 
OMENU
m 
→  Sound 
→ ENTER
E
 
■
Sound Effect
 
NIf Speaker Select is set to External Speaker, Sound Effect is disabled.
 
NAvailable only when Sound Mode is set to Standard.
 
●SRS TruSurround HD (Off / On) 
t: This function provides a virtual 5.1 
channel surround sound experience through a pair of speakers using HRTF 
(Head Related Transfer Function) technology.
 
●SRS TruDialog (Off / On): This function allows you to increase the intensity of 
a voice over background music or sound effects so that dialog can be heard 
more clearly.  
						

							▶
English
▶
 
●Equalizer: The Equalizer displays a series of sliders. Use the up and down 
arrow keys to select a slider. Use the left and right arrow keys to change the 
slider’s value. To Reset the Equalizer, select Reset and press ENTER
E, 
then select Ye s  and press ENTER
E. To exit, select Close, and then press 
ENTER E.
Equalizer is available in the standard sound mode only.
 
●Balance L/R: Adjusts the balance between the right and left speaker.
 
●100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts 
the volume level of specific bandwidth frequencies.
 
●Reset: Resets the equalizer to its default settings.  
						

							▶
English
▶
 
■
3D Audio (Off / Low / Medium / High)
3D audio technology provides the immersive sound corresponding to the pop-up 
effect of 3D video by audio depth control in perspective.
 
NAvailable only when watching 3D image.  
						

							▶
English
▶
 
■
Broadcast Audio Options
 
●Preferred Language 
(digital channels only)
Use the up and down arrow keys to select a language, and then press 
ENTER
E.
Digital-TV broadcasts can simultaneously transmit many audio tracks (for 
example, simultaneous translations of the program into foreign languages).
 
NYou can only select a language from among the ones being broadcasted.  
						

							▶
English
▶
 
●Multi-Track Sound (MTS) 
t 
(analog channels only)
Select an option using the up and down arrow keys, and the press ENTER E.
Mono: Choose for channels that are broadcasting in mono or if you are having 
difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a 
foreign-language translation.
 
NDepending on the program being broadcast, you can listen to Mono, 
Stereo, or SAP.  
						

							▶
English
▶
 
■
SPDIF Output
SPDIF (Sony Philips Digital Interface) provides digital audio output to speakers and 
various digital devices such as A/V Receivers and Home Theaters which reduces 
interference and distortion.
 
●Audio Format (PCM / Dolby Digital): You can select the Digital Audio output 
(SPDIF) format. The available Digital Audio output (SPDIF) format ma\
y differ 
depending on the input source.
 
●Audio Delay: Lets you correct timing mismatches between the audio track and 
the video when you are watching the TV and listening to digital audio output 
from the TV through an external device such as an AV receiver. When you 
select Audio Delay, a slider appears. User the left and right arrow buttons to 
adjust the slider. Press ENTER
E when done (0ms ~ 250ms).  
						

							▶
English
▶
 
■
Speaker Settings
 
●Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie through an 
external receiver, you may hear a sound echo caused by the difference in 
decoding speed between the TV’s speakers and the speakers attached to your 
audio receiver. If this occurs, set the TV to External Speaker.  
						

							▶
English
▶
 
NNOTE
 
●When you set Speaker Select to External Speaker, the TV’s speakers 
are turned off. You will hear sound through the external speakers only. 
When you set Speaker Select to TV Speaker both the TV’s speakers 
and the external speakers are on. You will hear sound through both.
 
●When Speaker Select is set to External Speaker, the 
y and 
MUTE buttons will not operate and the sound settings will be limited.
 
●If there is no video signal, both the TV’s speakers and the external 
speakers will be mute.  
						

							▶
English
▶
 
●Auto Volume (Off / Normal / Night)
Normal equalizes the volume level on each channel, so that when you change 
channels, the volume level is the same.
Night equalizes and decrease the volume level on each channel, so each 
channel is quieter. Night is useful at night, when you may want to keep the 
volume low.
 
NTo use the volume control of a connected source device, set Auto Volume 
to Off . A change to the volume control of the connected source device may 
not be applied if Auto Volume is set to Normal or Night.