Samsung Television UN60D7050VF User Manual

							▶
English
▶
 
■
SWL (Samsung Wireless Link)
This function lets you connect a Samsung device that supports  WPS(PBC) to your 
TV wirelessly. You can connect devices to the TV even if the TV is not connected 
to a sharer (a router or modem).
 
NFor the TV to use Smart Hub, you must have an AP (the access point, usually 
a router or modem) and the AP must be connected to a wireless network.
 
NOnly sharers using the 2.4 Ghz band are supported. Sharers using the 5 Ghz 
band are not supported.  
						

							▶
English
▶
 
■
Connect Using SWL
You can connect a device that supports WPS(PBC) directly to the TV.
 
NThis function is only available when you set SWL (Samsung Wireless Link) to 
On.
How to connect using Samsung Wireless Link To connect a device to the TV using SWL, follow these steps:1.  Go to the Network Settings screen.  
(MENU
m 
→  Network 
→ SWL (Samsung Wireless Link) 
→ ENTER
E).
2. Select  SWL (Samsung Wireless Link), and then press ENTER
E button to 
turn it On.  
						

							▶
English
▶
3. Select Connect SWL by using the 
d button and press the ENTER
E button.
4.  If the “Press the WPS(PBC) button on your Wireless Router within 120 
seconds.” message appears, press the WPS(PBC) button on the device you 
want to connect. A countdown timer also appears on the screen.
 
NFor more information, refer to the wireless network setup manual of the 
device.
5.  If the device connects properly to the TV, the message box with the countdown 
timer disappears automatically.
 
NIf the connection fails, please retry after 2 minutes.  
						

							▶
English
▶
 
■
One Foot Connection Network Setup
The One Foot Connection function lets you connect your Samsung TV 
automatically to a Samsung wireless routers. If your wireless router does not 
support One Foot Connection, you must connect using one of the other 
methods.
 
NYou can check for equipment that supports One Foot Connection on www.
samsung.com.  
						

							▶
English
▶
How to set up using One Foot Connection1.  Turn on the Samsugn wireless router and the TV.
2.  Go to Network Settings screen.  
(MENU
m 
→  Network 
→ Network Settings 
→  ENTER
E).
3. Select  One Foot Connection, and press 
ENTER E, then press ENTER
E again.
Network Settings
Select a network connection type.
Wired
Previous
Next
CancelWireless (General)
WPS(PBC)
One Foot Connection
Connect to wireless network 
automatically if your Wireless 
Router supports One Foot 
Connection. Select this 
connection type after placing  
the Wireless Router within 10 
inches(25cm) of your TV.
2/6
 
● The displayed image may differ depending on the 
model.  
						

							▶
English
▶
4. Place the wireless router in parallel with your TV set (if you do not need to use the 
adapter), and no farther away than 25cm (about 9 3/4 inches).
 
NIf One Foot Connection does not connect your TV to your Router, a pop-
up screen appears on the screen notifying you of the failure. If you want to try 
using One Foot Connection again, reset the wireless router, and then try again 
from Step 1. You can also choose one of the other connection setup methods.
5.  The network connection screen appears, and network setup is done.
6.  Place the wireless router in a desired location.
 
NIf the wireless router’s settings change or you install a new wireless router, you 
must perform the One Foot Connection procedure again, beginning from Step 
1.  
						

							▶
English
▶
 
■
Plug & Access Network Setup
The Plug & Access function lets you easily connect your Samsung TV to your 
Samsung wireless router by using a USB memory stick to transfer the setup 
information from the router to the TV. If your non-Samsung wireless router does 
not support Plug & Access, you must connect using one of the other methods.
 
NYou can check for equipment that supports Plug & Access on www.samsung.
com.  
						

							▶
English
▶
How to set up using the Plug & Access function1.  Turn on the Samsung wireless router and your TV.
2.  Insert a USB memory stick into the USB port in your Samsung wireless router. 
Check the router’s LED’s to make sure it is on (Blinking 
→ on).
3.  Take the USB memory stick out of the router, and then insert it into a USB port 
on your Samsung TV. The memory stick downloads the connection information.
4.  Wait until the connection is automatically established.
 
NIf Plug & Access does not connect your TV to your wireless router, a pop-
up screen appears on the screen notifying you of the failure. If you want 
to try using Plug & Access again, reset the AP, disconnect the Samsung 
Wireless LAN adapter and then try again from Step 1. You can also choose 
one of the other connection setup methods.  
						

							▶
English
▶
5. The network connection screen appears, and the network setup is done.
6.  Place the wireless router in a desired location.
 
NIf the wireless router’s settings change or you install a new wireless router, 
you must perform the Plug & Access procedure again, beginning from Step 
1.  
						

							▶
English
▶
Priority QOS
Samsung wireless routers are optimized to stream HD AV to Samsung DTVs.
This Priority QOS function is unique to Samsung wireless routers.
You can connect a Samsung wireless router to many devices, such as laptops, 
mobile phones, BD players etc. But, when you connect a Samsung TV to a 
Samsung wireless router, the Samsung wireless router gives the Samsung TV a 
priority connection.
This ensures you get the highest quality streaming contents and the fastest 
throughput speed.
 
●Priority QOS makes your TV faster by giving it priority bandwidth. (Pri\
ority QOS 
is optional. You can turn it on and off.)
 
●Because your Samsung TV has a priority connection, you can enjoy HD 
content without buffering.
 
NThe connection speed may vary based on the network environment.