Samsung Television UN60D7050VF User Manual

							▶
English
▶
 
NIf your Samsung TV connects to a non-Samsung DLNA server, a compatibility 
issue may occur during video playback.
 
NBy connecting your Samsung TV to a network via AllShare™, you can use 
Samsung’s original functions as follows:
 
–Playback of various video formats (DivX, MP4, 3GPP, AVI, ASF, MKV, etc.)
 
–Video thumbnail feature
 
–Bookmark function (to resume video playback)
 
–Auto-chaptering (scene navigation)
 
–Digital content management
 
–Compatibility with various subtitle formats (SRT, SMI, SUB, TXT, TTXT)
 
–Search with file names
 
–And many others
 
NTo use the original DLNA functions of Samsung fully, it is recommended that 
you use the AllShare™ software provided with your TV.  
						

							▶
English
▶
 
❑
Setting Up AllShare™
 
OMENU
m 
→  Network 
→ AllShare Settings 
→ ENTER
E
 
■
AllShare Settings
 
●Media (On / Off): Enables or disables the media 
function. When the media function is on, you can 
control Media contents play using mobile phones 
or other devices that support DLNA DMC.AllShare Settings
Media   Off
 
● The displayed image may differ 
depending on the model.  
						

							▶
English
▶
 
■
Media
Shows a list of mobile phones or connected devices which have been set u\
p to 
use the Media function with this TV.
 
NThe Media function is available in all devices which support DLNA DMC.
 
●Allowed / Denied: Allows/Blocks the devices.
 
●Delete: Deletes the devices from the list.
 
NThis function only deletes the name of the device from the list. If the deleted 
device is turned on or tries to connect to the TV, it may appear on the list 
again.  
						

							▶
English
▶
Using the Media Function
An alarm window appears informing you that media contents (videos, phot\
os, music) 
sent from a mobile phone will be displayed on your TV. The contents are played 
automatically 3 seconds after the alarm window appears. If you press the RETURN or 
EXIT button when the alarm window appears, the media contents are not played.
 
NNOTE
 
●The first time a device accesses your TV through the media function, a warning 
popup window appears. Press the ENTER
E button to select Allow. This 
permits the phone to access the TV freely and use the Media function to play 
content.  
						

							▶
English
▶
 
●To turn off media contents transmissions from a mobile phone, set Media to 
Off  in the AllShare Settings.
 
●Contents may not play on your TV depending on their resolution and format.
 
●The ENTER
E and 
l / 
r buttons may not work depending on the type of 
media content.
 
●Using the mobile device, you can control the media play. For details, refer to 
each mobile’s user’s guide.  
						

							▶
English
▶
 
❑
Anynet+(HDMI-CEC)
 
■
What is Anynet+?  t
Anynet+ is a function that enables you to control all connected Samsung devices that 
support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used 
only with Samsung devices that have the Anynet+ feature. To be sure your Samsung 
device has this feature, check if there is an Anynet+ logo on it.
 
NNOTE
 
●You can only control Anynet+ devices using the TV’s remote control, not the 
buttons on the TV.
 
●The TV remote control may not work under certain conditions. If this occurs, 
reselect the Anynet+ device.
 
●The Anynet+ functions do not operate with other manufacturers’ products.  
						

							▶
English
▶
 
●For instructions explaining how to connect Anynet+ external devices, refer to the 
device’s user manual You must connect an Anynet+ device using an HDMI cable. 
Some HDMI cables may not support Anynet+ functions.
 
●Anynet+ works when the AV device supporting Anynet+ is in the standby or on 
status.
 
●Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 
devices of the same type.  
						

							▶
English
▶
 
●However, you can connect only one Anynet+ Home Theater. To connect an 
Anynet+ Home Theate, connect the Home Theater to the TV using an HDMI ca\
ble 
then:
 
–To hear sound from the Home Theater’s Front, Left and Right speakers and the 
subwoofer only, connect a Digital Optical cable between the DIGITAL AUDIO 
OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home 
Theater.
 
–To hear 5.1 channel audio, connect HDMI cables to your Anynet+ DVD player, 
satellite box, etc. Then, connect the DIGITAL AUDIO OUT (OPTICAL) jack on 
your DVD player, Satellite Box, etc. (i.e. Anynet + Device 1 or 2) directly to the 
Home Theater, not the TV.  
						

							▶
English
▶
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+\
 devices 
connected to the TV.
Anynet+ MenuDescription
View TV
 
•Changes Anynet+ mode to TV broadcast mode.
Device List
 
•Shows the Anynet+ device list.
(device_name) MENU
 
•Shows the menu of the connected device menus. E.g. if a DVD player is 
connected, the disc menu of the DVD player will appear.
(device_name) Tools
 
•Shows the tools menu of the connected device. E.g. if a DVD player is 
connected, the tools menu of the DVD player will appear.
 
NDepending on the device, this menu may not be available.
(device_name) Title Menu
 
•Shows the title menu of the disc in the connected device. E.g. If a DVD \
player is connected, the title menu of the movie in the DVD player will \
appear.
 
NDepending on the device, this menu may not be available.
Receiver
 
•Sound is played through the receiver.  
						

							▶
English
▶
 
❑
Setting Up Anynet+
 
OMENU
m 
→  System 
→ Anynet+ (HDMI-CEC) 
→ ENTER
E
 
■
Anynet+ (HDMI-CEC) (Off / On)
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
 
NWhen the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related 
operations are deactivated.