Samsung Television UN60D7050VF User Manual

							▶
English
▶
8. The network connection screen appears and the verification process starts. 
When the connection has been verified, the “Internet is connected successfully.” 
message appears.
 
NIf the network does not accept the Security key (Security key or PIN), 
select Retry or select IP Settings to enter the settings manually.
 
NIf you want to set up the connection manually, select IP Settings. Then, go 
to the next section, “How to set up manually”.  
						

							▶
English
▶
 
■
Manual Network Setup
Use the Manual Network Setup when connecting your TV to a network that 
requires a Static IP address or if the automatic connection process has failed.
Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these 
steps:1.  Right click the Network icon on the bottom right of the screen.
2.  In the pop-up menu that appears, click Status.
3.  On the dialog that appears, click the Support tab.
4.  On the Support Tab, click the Details button. The Network connection values 
are displayed.  
						

							▶
English
▶
How to set up manuallyTo set up your TV’s cable network connection manually, follow these steps:1.  Go to the Network Settings screen.  (MENU m 
→  Network 
→ Network Settings 
→  ENTER
E)
2. Select  Wireless (General), press ENTER
E, 
and then press ENTER E again.
3. The  Network function searches for available 
wireless networks. When done, it displays a 
list of the available networks.
IP Settings
IP Mode   Manual
DNS Mode   Manual
DNS Server   0 . 0 . 0 . 0
IP Address 
 0 . 0 . 0 . 0
Subnet Mask   0 . 0 . 0 . 0
Gateway   0 . 0 . 0 . 0
OK
 
● The displayed image may differ depending on 
the model. 
						

							▶
English
▶
4. In the list of networks, press the 
u or 
d button to select a network, and then 
press the ENTER E button twice.
 
NIf the wireless router is set to Hidden (Invisible), you have to select Add 
Network and enter the correct Network Name (SSID) and Security key to 
establish the connection.
5.  If the Enter security key screen appears, go to step 6. If you selected an 
wireless router that does not have security, go to step 8.  
						

							▶
English
▶
6. Enter the Security key (Security key or PIN).
 
NWhen you enter the Security key (Security key or PIN), use the 
u / 
d  / 
l  / 
r  buttons on your remote to select number/characters. Press ENTER
E to 
enter the characters. 
 
NYou can also enter numbers by pressing the number buttons on your 
remote.
 
NYou should be able to find the Pass Phrase on one of the set up screens 
you used to set up your router or modem.
7.  When done, use the 
r button to move the cursor to Next, and then press the 
ENTER E button.  
						

							▶
English
▶
8. The network connection screen appears and the verification process starts. 
Press ENTER
E to cancel. Select IP Settings on the network connection 
screen. The IP Settings screen appears.
9.  Select the field on the top, press ENTER
E, and then set IP Mode to Manual.
10.  Press the 
d button on your remote to go to the IP Address entry field, and 
then press ENTER E.
11.  Enter the first portion of the IP Address (for example, 105) into the first entry 
field using the number keys on your remote. Press the 
r button to go to the 
next field.
12.  Enter the next portion of the IP Address. Press the 
r button to go to the next 
field.  
						

							▶
English
▶
13. Repeat the entry process for each field in the IP Address.
 
NIf you make a mistake when entering a number, re-enter the number to 
correct it. You can also press the 
u or 
d button to change the number one 
unit at a time.
14.  When done entering the IP Address, press ENTER
E.
15.  Press the 
d button to go to the Subnet Mask fields, and then press 
ENTER E.
16.  Repeat the same entry process for Subnet Mask, Gateway, and DNS Server.
17. 
When done, select OK at the bottom of the page, and then press ENTER E. 
The network connection screen appears and the verification process starts. 
When the connection has been verified, the “Internet is connected successfully.” 
message appears.   
						

							▶
English
▶
 
■
WPS(PBC) Network Setup
How to set up using WPS(PBC) If your router has a WPS(PBC) button, follow these steps:1.  Go to Network Setting screen.  
(MENU
m 
→  Network 
→ Network 
Settings  → ENTER
E).
2. Select  WPS(PBC), press ENTER
E, and 
then press ENTER E again.
3.  Press the WPS(PBC) button on your router 
within 2 minutes. Your TV automatically 
acquires all the network setting values it 
needs and connects to your network.
4.  The network connection screen appears, and network setup is done.
Network Settings
Select a network connection type.
Wired
Previous
Next
CancelWireless (General)
WPS(PBC)
One Foot Connection
Connect to the Wireless Router 
easily by pressing the WPS(PBC) 
button. Choose this if your 
Wireless Router supports Push 
Button Configuration(PBC)
 
● The displayed image may differ depending on the 
model.  
						

							▶
English
▶
 
■
Ad Hoc Network Setup
You can connect to a mobile device supporting Ad-hoc connections without \
a 
wireless router or AP through the TV. When connected to a mobile device, you can 
use files on the device or connect to the Internet using the AllShare or Multimedia 
function.
 
NThis function is available when SWL (Samsung Wireless Link) is set to Off .
How to set up using Ad hoc 1.  Go to Network Settings screen.  
(MENU
m 
→  Network 
→ Network Settings 
→ ENTER
E).
2. Select  Wireless (General), and press ENTER
E, then press ENTER
E again.  
						

							▶
English
▶
3. Select Ad hoc. The message “Ad hoc service supports a direct connection 
with Wi-Fi compatible devices like a cell phone or PC. Other network 
services may be limited. Do you want to change the network connection?” 
is displayed.
4. Select  OK, and press ENTER
E. The TV searches for the mobile device.
5.  When the TV finishes searching for your mobile device, input the generated 
Network Name (SSID) and Security Key into the device you want to connect 
and then connect to the network
 
NIf network does not operate normally, check the Network Name (SSID) an\
d 
Security key again. An incorrect Security key may cause a malfunction.
 
NIf a device is connected once, it is displayed in the Network Setting li\
st. 
When you connect to it again, you can find it in the list.