Samsung Television UN60D7050VF User Manual

							▶
English
▶
3. On the next screen, enter a new password on the first line. Enter it again on 
the second line to confirm.
4. The  Changing Password Completed. message screen appears. Press the 
ENTER E button or wait for the screen to close - about 5 seconds.
Remove from TV Account List: The Remove from TV Account List function 
cancels all your current registered Service Accounts that you registered on the 
Register Service Account screen.
Deactivate Account: The Deactivate Account function deactivates your 
Smart TV ID and deletes it and all your account settings entirely from Smart 
Hub.  
						

							▶
English
▶
 
●Service Manager
Ticker Autorun: You can set Ticker Autorun to come on when powering on the 
T V.
 
NThe Ticker function allows you to view content from the current input source 
and ticker data at the same time.
 
NDepending on your country, the Ticker application may have a different service 
or not be supported. 
Channel Bound Service (Off / On): Some channels support applications as an 
Internet data service, allowing you to access the Internet service while watching 
T V.
 
NOnly available if supported by the broadcaster  
						

							▶
English
▶
 
●Reset: The Reset function initializes all downloaded applications, erases all 
user accounts and settings from the TV, and resets all Smart Hub settings to the 
factory default settings. It then restarts Smart Hub as if it were starting for the first 
time. Your account, however, remains on the Smart Hub server. To log into your 
account, enter your ID and password on the Login screen.
To use the Reset function, follow these steps: 
1.  In the Settings menu, select Reset, and then press the ENTER
E button. The 
Reset screen appears.  
						

							▶
English
▶
2. Enter the your security password.
 
NThe default password set is “0-0-0-0.”
 
NIf you forget the password you created, press the following sequence of 
remote control buttons to reset the password to “0-0-0-0”:  
POWER (off)  → MUTE 
→ 8 
→ 2 
→ 4 
→ POWER (on).
3.  After a few moments, Smart Hub automatically resets. The screen may 
go black, then Smart Hub re-appears. In a few moments, it starts the re-
initialization procedure.
4.  To complete the re-initialization, go to Step 2 in Starting Smart Hub for the First 
Time.  
						

							▶
English
▶
 
●Properties
The Properties menu item lists three functions that display information about Smart 
Hub :
Detail: Lists information about Smart Hub including version number, the number of 
services installed, memory usage, and the unique product ID.
Terms of Service Agreement: Display the Terms of Service Agreement.  
						

							▶
English
▶
 
■
Edit Mode
The functions in the Edit Mode menu let you manipulate the applications in the My 
Applications section of the Smart Hub  screen. Using these functions, you can lock 
and unlock access to some applications, create folders and move applications to 
them, rename folders, delete applications, and change the position of applicati\
ons 
on the screen. To access the Edit Mode Menu, and then select a menu item, 
follow these steps:
1.  Press the 
{ button on your remote. The Edit Mode menu bar appears on the 
bottom of the screen.
2.  Press the 
u / 
d  / 
l / 
r to select a menu item, and then press the ENTER
E 
button.  
						

							▶
English
▶
The functions in the Edit Mode Menu bar are described below.
 
NNOTE
 
●Some menu items may not appear on the screen. To see these items, press 
the 
l / 
r to move to the screen edge, and then press one more time to 
reveal the items.
 
●You can close the bar by highlighting the X on the bottom right side, and\
 
then pressing the ENTER
E button.  
						

							▶
English
▶
 
●Move
The Move function lets you change the screen position of an application. To 
use the Move function, follow these steps:
1.  Press the 
{ button on your remote.
2.  Select an application, and then press the ENTER
E button. A 
c appears 
above the application.
3.  Press the 
u / 
d  / 
l / 
r to select Move, and then press the ENTER
E 
button. A position change icon appears above the application.
4.  Press the 
u / 
d  / 
l / 
r to move the icon. Press the ENTER
E button 
when the icon is in the position of your choice. The application moves t\
o its 
new location.  
						

							▶
English
▶
 
●Move to Folder
The Move to Folder function lets you move an application to a folder. To use 
the Move to Folder function, follow these steps:
1.  Press the 
{ button on your remote.
2.  Select an application, and then press the ENTER
E button.
3.  Press the 
u / 
d  / 
l / 
r to select Move to Folder, and then press the 
ENTER E button. The Move to Folder screen opens.
4.  Press the 
u / 
d  / 
l / 
r to select a folder, and then press the ENTER
E 
button. The Moved to Folder message appears, and then closes. The 
application has been moved to the folder.  
						

							▶
English
▶
To access an application in a Folder1.  Close the Edit Mode menu.
2.  In My Applications, press the 
u / 
d  / 
l / 
r to select a folder, and then 
press the ENTER E button. The folder opens.
3.  Select an application, and then press the ENTER
E button. The application 
service starts.