Samsung Television UN60D7050VF User Manual

							▶
English
▶
 
■
Auto Program
Scans for channels automatically and stores them in the TV’s memory.
To start Auto Program, follow these steps:
1. Push  MENU
m 
→  Channel 
→ ENTER
E on your remote.
2. Select  Auto Program, and then press ENTER
E.
3. Select  Air or Cable or both by highlighting and then pressing ENTER
E.
 
NIf you selected Air or Cable or both on the Antenna screen, your choice will 
already be selected.
4. Select  Next, and then press ENTER
E.  
						

							▶
English
▶
5. If you selected Cable, the Cable System screen appears. Select Digital, and 
then press ENTER
E. 
 
NIf you selected Antenna only, Auto Program starts.
6. Select  STD, HRC, or IRC, and then press ENTER
E.
7.  Repeat for Analog.
8. Select  Next, and then press ENTER
E. Auto Program starts.
 
NAfter all the available channels are stored, Auto Program removes 
scrambled channels. When done, the Auto Program menu then reappears. 
This process can take up to 30 minutes  
						

							▶
English
▶
 
❑
Other Features
 
OMENU
m 
→  Channel 
→ ENTER
E
 
■
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is completed. This 
process may take up to minutes.
How to Stop the Clear Scrambled Channels function 1.  Press the ENTER
E button to select Stop.
2.  Press the 
u button to select Ye s
.
3.  Press the ENTER
E button.
 
NThis function is only available in Cable mode.  
						

							▶
English
▶
 
■
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done 
automatically during the search and store operation. If the signal is weak or 
distorted, fine tune the channel manually. Scroll to the left or right until the image is 
clear.
 
NSettings are applied to the channel you’re currently watching.
 
NFine tuned channels that have been saved are marked with an asterisk “*” on 
the right-hand side of the channel number in the channel banner. 
 
NTo reset the fine-tuning, select Reset.  
						

							Picture Menu
▶
English
▶
 
❑
Changing the Preset Picture Mode
 
OMENU
m 
→  Picture 
→ Picture Mode 
→ ENTER
E
 
■
Picture Mode  t
Picture modes apply preset adjustments to the picture. Select a mode using the 
up and down arrow keys, and then press the ENTER E button.
 
NWhen connecting a PC, you can only select Entertain and Standard.
 
●Dynamic: Suitable for a bright room.
 
●Standard: Suitable for a normal environment.
 
●Natural  for LED TV  / Relax  for PDP TV : Suitable for reducing eye strain.
 
●Movie: Suitable for watching movies in a dark room.
 
●Entertain (When connecting a PC): Suitable for watching movies and games.  
						

							▶
English
▶
 
❑
Adjusting Picture Settings
 
OMENU
m 
→  Picture 
→ ENTER
E
 
■
Backlight 
 for LED TV  / Cell Light  for PDP TV  / Contrast / Brightness / Sharpness / 
Color / Tint (G/R)
Your television has several options for adjusting picture quality. Select an option 
using the up and down arrow keys, and then press ENTER E. Use the arrow 
keys to adjust the option value or select an option setting. When done, \
press 
ENTER E.  
						

							▶
English
▶
 
NWhen you make changes to Backlight / Cell Light, Contrast, Brightness, 
Sharpness, Color or Tint (G/R), the OSD will be adjusted accordingly.
 
NWhen connecting a PC, you can only make changes to Backlight / Cell Light, 
Contrast, Brightness, and Sharpness.
 
NYou can adjust and store Settings for each external device connected to the TV.
 
NLowering picture brightness reduces power consumption.  
						

							▶
English
▶
 
❑
Changing the Picture Size
 
OMENU
m 
→  Picture 
→ Screen Adjustment 
→ ENTER
E
 
■
Screen Adjustment
Screen Adjustment provides various picture size and aspect ratio options. Select 
an option using the  u and 
d arrow keys, and then press ENTER
E. Use the 
arrow keys to select an option in the sub-menu, and then press ENTER E.
 
●Picture Size: If you have a cable box or satellite receiver, it may have its own 
set of screen sizes as well. However, we highly recommend you use your TV’s 
16:9 mode most of the time.
 
NIf you have set Double (
à, 
Π) mode in PIP (Picture-in-Picture), you 
cannot adjust the Picture Size.
16:9: Sets the picture to 16:9 wide mode.  
						

							▶
English
▶
Zoom1: Use for moderate magnification. Cuts off the top and sides.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture so it fits the entire screen. 
 
NAvailable with HD 1080i / 720p signals in 16:9 mode.
4:3: Sets the picture to basic (4:3) mode.
 
NDo not set your TV to 4:3 format for a long time. The borders displayed 
on the left and right, or top and bottom of the screen may cause image 
retention (screen burn) which is not covered by the warranty.  
						

							▶
English
▶
Screen Fit: When your TV inputs HDMI (720p / 1080i / 1080p) or Component 
(1080i / 1080p) signals, displays the full image without any cut-off. 
Smart View 1: Reduces the 16:9 picture by 50%. 
 for LED TV 
Smart View 2: Reduces the 16:9 picture by 25%.  for LED TV 
 
NSmart View 1 is enabled only in HDMI mode. 
 
NSmart View 2 is enabled only in HDMI or DTV mode.
 
NThe picture size can vary depending on the input resolution when you play 
content from Videos in Smart Hub.
 
●Position: Adjusts the picture position. Position is only available if Picture size 
is set to Zoom1, Zoom2, Wide Fit, or Screen fit.